[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Requirements for building USRP2 FPGA firmware on
From: |
Ian Buckley |
Subject: |
Re: [Discuss-gnuradio] Requirements for building USRP2 FPGA firmware on Ubuntu 10.04 |
Date: |
Sun, 13 Feb 2011 10:42:40 -0800 |
Just to expand on Matt's answer a little. ISE 12.2 and ISE 12.3 are also known
to work to build the USRP2 UHD FPGA image. I haven't tried ISE12.4 yet.
-Ian
>
>
> Message: 4
> Date: Sat, 12 Feb 2011 12:20:13 -0800
> From: Matt Ettus <address@hidden>
> Subject: Re: [Discuss-gnuradio] Requirements for building USRP2 FPGA
> firmware on Ubuntu 10.04
> To: Elvis Dowson <address@hidden>
> Cc: GNU Radio Discussion Group <address@hidden>
> Message-ID: <address@hidden>
> Content-Type: text/plain; charset=ISO-8859-1
>
> On 02/12/2011 12:03 PM, Elvis Dowson wrote:
>> Hi, I know its been discussed many times, it's a bit confusing as to
>> the exact versions of the tools that are required for building USRP2
>> FPGA firmware, for use with the UHD driver on Ubuntu 10.04. The
>> README file in the uhd git repo for the fpga folder doesn't list this
>> information.
>
> I think there is a terminology issue here. The FPGA image is built by
> ISE. The firmware is built by gcc. I assume you mean the FPGA image.
>
>> Question 01: Which version of ISE is know to work with the UHD driver
>> and GNU Radio 3.3.1 master branch?
>
> This is where you are going wrong. UHD is not a part of GNU Radio 3.3.1.
>
> If you want to use UHD, you need the GNU Radio next branch. In that
> case you must use ISE 12.1.
>
>>
>> Question 02: What is the build command and what options should I use
>> to build the USRP2 UHD FPGA firmware image?
>
> Go into the u2_rev3 directory and type "make bin"
>
> Matt
>
>
>
>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Discuss-gnuradio] Requirements for building USRP2 FPGA firmware on Ubuntu 10.04,
Ian Buckley <=