[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Bandwidth switching per symbol
From: |
bjoernm |
Subject: |
[Discuss-gnuradio] Bandwidth switching per symbol |
Date: |
Wed, 27 Jul 2011 13:31:53 +0200 |
User-agent: |
Internet Messaging Program (IMP) H3 (4.2) |
Hi,
I'm currently using the UCLA ZigBee Phy implementation by Thomas
Schmid and I need to
change the Bandwidth of the used wireless channel on a per symbol basis.
I managed to change it on a per packet basis, which can be done on the
python level
(tunnel.py, usrp_transmit_path.py etc.). Well now, I need to do the
same thing, but on a
per symbol basis, which (up to my knowledge) is not possible from the
python level...
Does anyone have an idea how I could do that? (Changing the Bitrate of
the USRP after
each symbol (e.g. after sending 32 modulated bits (actually chips)))
I would be very happy for any help or suggestions!
Thanks a lot!
best regards,
Bjorn
- [Discuss-gnuradio] Bandwidth switching per symbol, bjoernm, 2011/07/27
- [Discuss-gnuradio] Bandwidth switching per symbol,
bjoernm <=
- Re: [Discuss-gnuradio] Bandwidth switching per symbol, Matthias Wilhelm, 2011/07/27
- Re: [Discuss-gnuradio] Bandwidth switching per symbol, bjoernm, 2011/07/27
- Re: [Discuss-gnuradio] Bandwidth switching per symbol, Matthias Wilhelm, 2011/07/27
- Re: [Discuss-gnuradio] Bandwidth switching per symbol, bjoernm, 2011/07/28
- Re: [Discuss-gnuradio] Bandwidth switching per symbol, Matthias Wilhelm, 2011/07/28
- Re: [Discuss-gnuradio] Bandwidth switching per symbol, bjoernm, 2011/07/29
- Re: [Discuss-gnuradio] Bandwidth switching per symbol, Matthias Wilhelm, 2011/07/29
- Re: [Discuss-gnuradio] Bandwidth switching per symbol, bjoernm, 2011/07/29
- Re: [Discuss-gnuradio] Bandwidth switching per symbol, Matthias Wilhelm, 2011/07/29
- Re: [Discuss-gnuradio] Bandwidth switching per symbol, bjoernm, 2011/07/29