Re: [Discuss-gnuradio] Getting USRP N210 running

[hanwen]

Hi, Nick, Vadim, Josh,

 

I got the same problem with two N210 in my institute, that only LED B & F is on.

I tried to reprogram the FPGA following the thread "Bricking and recovery of N210" but it remains the same?

 

Have you found how to work it out?

 

 Cheers,

Hanwen

 

2010/12/14 Nick Foster <address@hidden>

On Tue, 2010-12-14 at 11:57 +0100, Vadim Uvin wrote:
> Hello list,
>
> I am trying to get USRP N210 running. I experience a problem when I
> connect it to my computer. I see only B and F LEDs on, the Ethernet
> LEDs are shut down after about one second of switching on USRP.
> "mii-tools eth0" outputs "1000 MBit, half duplex, no link". Wiresharks
> shows no packets exchanged.
>
> I also have set up the UHD and configured the eth0 to static address
> 192.168.10.1, but uhd_find_devices shows nothing.
>
> Any ideas how I can proceed?

Vadim,

Have you tried another cable? Has your setup worked with USRP2s in the
past?

--n


>
> Thanks.
>
> Vadim.
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio



_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio