Re: [Discuss-gnuradio] "uhd_find_devices" command returns "No UHD Devices Found"

[Marcus D. Leech]

>
> Dear all,
>
> I have a trouble with "uhd_find_devices" command.
>
> After burning firmware and fpga images on SD card, I inserted the SD
> card into SD memory port and powered on USRP2.
> Next, I carried out "sudo ifconfig eth0 192.168.10.2" and "ping
> 192.168.10.2". These commands were carried out successfully.
>
> After that, I carried out "sudo ./uhd_find_devices" command. This
> command worked for a while, however, after some time, returned "No UHD
> Devices Found".
>
> I want to know why the return of "uhd_find_devices" command changed to
> "No UHD Devices Found".
>
> Best regards,
> Nakajo Tomoyuki
>
>
>   
Is perhaps Network Manager taking your ethernet interface down?   It
needs to be configured
  for a static address assignment with no DHCP.

Also, what happens when you:

uhd_usrp_probe --args "addr=192.168.10.2"




-- 
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org