[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] LFTX Rev 2.2 Compatibility Issue with USRP2
From: |
juancolon |
Subject: |
Re: [Discuss-gnuradio] LFTX Rev 2.2 Compatibility Issue with USRP2 |
Date: |
Thu, 21 Jun 2012 06:06:06 -0700 (PDT) |
Marcus,
This is the output:
linux; GNU C++ version 4.4.3; Boost_104000; UHD_003.004.002-0-g7f44d838
-- Opening a USRP2/N-Series device...
-- Current recv frame size: 1472 bytes
-- Current send frame size: 1472 bytes
UHD Warning:
Unable to set the thread priority. Performance may be negatively
affected.
Please see the general application notes in the manual for instructions.
EnvironmentError: OSError: error in pthread_setschedparam
_____________________________________________________
/
| Device: USRP2 / N-Series Device
| _____________________________________________________
| /
| | Mboard: USRP2-REV4
| | hardware: 1024
| | mac-addr: 00:50:c2:85:36:70
| | ip-addr: 192.168.10.2
| | gpsdo: none
| | serial: 1648
| |
| | Time sources: none, external, _external_, mimo
| | Clock sources: internal, external, mimo
| | Sensors: mimo_locked, ref_locked
| | _____________________________________________________
| | /
| | | RX DSP: 0
| | | Freq range: -50.000 to 50.000 Mhz
| | _____________________________________________________
| | /
| | | RX DSP: 1
| | | Freq range: -50.000 to 50.000 Mhz
| | _____________________________________________________
| | /
| | | RX Dboard: A
| | | _____________________________________________________
| | | /
| | | | RX Subdev: 0
| | | | Name: Unknown (0xffff) - 0
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: 0.000 to 0.000 Mhz
| | | | Gain Elements: None
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Codec: A
| | | | Name: ltc2284
| | | | Gain Elements: None
| | _____________________________________________________
| | /
| | | TX DSP: 0
| | | Freq range: -250.000 to 250.000 Mhz
| | _____________________________________________________
| | /
| | | TX Dboard: A
| | | ID: LF TX (0x000e)
| | | _____________________________________________________
| | | /
| | | | TX Subdev: AB
| | | | Name: LF TX (0x000e) - AB
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -32.000 to 32.000 Mhz
| | | | Gain Elements: None
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Subdev: BA
| | | | Name: LF TX (0x000e) - BA
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -32.000 to 32.000 Mhz
| | | | Gain Elements: None
| | | | Connection Type: QI
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Subdev: A
| | | | Name: LF TX (0x000e) - A
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -32.000 to 32.000 Mhz
| | | | Gain Elements: None
| | | | Connection Type: I
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Subdev: B
| | | | Name: LF TX (0x000e) - B
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: -32.000 to 32.000 Mhz
| | | | Gain Elements: None
| | | | Connection Type: Q
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Codec: A
| | | | Name: ad9777
| | | | Gain Elements: None
--
View this message in context:
http://old.nabble.com/LFTX-Rev-2.2-Compatibility-Issue-with-USRP2-tp34044804p34048534.html
Sent from the GnuRadio mailing list archive at Nabble.com.