[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Problem setting USRP transmitting signal power
From: |
warren4300137 |
Subject: |
[Discuss-gnuradio] Problem setting USRP transmitting signal power |
Date: |
Sun, 24 Feb 2013 19:36:48 -0800 (PST) |
Hi~
I found some strange problem setting USRP transmitting signal power. The
method I change the transmit power is to use a constant to multiply the
signals. the problem is that I use bigger constant like 2.0, the SNR value i
calculate is lower than using constant like 1.0. the transmit signal values
are 0.005,-0.005. my experiment platform is USRP N210 plus motherboard
RFX2400. Is there anything wrong or there are better method to setting USRP
transmiting power?
thanks!!!
--
View this message in context:
http://gnuradio.4.n7.nabble.com/Problem-setting-USRP-transmitting-signal-power-tp39823.html
Sent from the GnuRadio mailing list archive at Nabble.com.
- [Discuss-gnuradio] Problem setting USRP transmitting signal power,
warren4300137 <=