Re: [Discuss-gnuradio] Network unreachable on Beaglebone Black

[Nathan West]

Phil has kept the gnuradio recipe in OE up to date, so you should be
able to get the latest version you want. You may need to get a more
recent version of Angstrom, though.

Have you tried using opkg update/upgrade? If that doesn't work just
try using a newer image. If you don't want to cross compile there's
plenty of options. You could grab a premade image from angstrom
website, or build your own here:
http://dominion.thruhere.net/koen/narcissus/


On Mon, Jul 22, 2013 at 11:55 AM, Nemanja Savic <address@hidden> wrote:
> there is no such option args is the answer from app.
> hm, because it was in repo of angstrom linux, and I don't know If I can
> handle crosscompiling of newer version (is there any other way?)
>
>
> On Mon, Jul 22, 2013 at 5:52 PM, Marcus Leech <address@hidden> wrote:
>>
>> really?
>>
>> So, if you uhd_rx_cfile --args "type=usrp1"
>>
>> What happens?
>>
>> Why the horribly-out-of-date Gnu Radio?   (And corresponding version of
>> UHD?)
>>
>>
>> on Jul 22, 2013, Nemanja Savic <address@hidden> wrote:
>>
>> But there is no option for that (type). it is gnuradio 3.4.3.
>>
>>
>> On Mon, Jul 22, 2013 at 5:11 PM, Marcus Leech <address@hidden> wrote:
>>>
>>> If you don't explicitly specify a device address, UHD will search through
>>> the defaults, including for an N2XX at 192.168.10.2.
>>>
>>> Just specify "type=usrp1" in the the device args.
>>>
>>>
>>> on Jul 22, 2013, Nemanja Savic <address@hidden> wrote:
>>>
>>> Hallo guys,
>>>
>>> I have installed gnuradio on Beaglebone black, which runs under Angstrom
>>> linux.
>>> uhd finding devices works good, and I am able to see my usrp1 device, but
>>> when I run uhd_rx_cfile i get following error:
>>>
>>> linux; GNU C++ version 4.5.3 20110311 (prerelease); Boost_104500;
>>> UHD_003.000.001-5ace684
>>>
>>> Traceback (most recent call last):
>>>   File "/usr/bin/uhd_rx_cfile.py", line 143, in <module>
>>>     tb = rx_cfile_block(options, filename)
>>>   File "/usr/bin/uhd_rx_cfile.py", line 51, in __init__
>>>     num_channels=1)
>>>   File "/usr/lib/python2.6/site-packages/gnuradio/uhd/__init__.py", line
>>> 74, in constructor_interceptor
>>>     return old_constructor(*args, **kwargs)
>>>   File "/usr/lib/python2.6/site-packages/gnuradio/uhd/uhd_swig.py", line
>>> 1831, in usrp_source
>>>     return _uhd_swig.usrp_source(*args, **kwargs)
>>> RuntimeError: Network is unreachable
>>>
>>> Can anybody tell what is the problem about?
>>> Thanks
>>>
>>> --
>>> Nemanja Savić
>>> ________________________________
>>>
>>> _______________________________________________
>>> Discuss-gnuradio mailing list
>>> address@hidden
>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>
>>>
>>
>>
>>
>>
>> --
>> Nemanja Savić
>>
>>
>
>
>
>
> --
> Nemanja Savić
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>