[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] USRP IP Address
From: |
n |
Subject: |
Re: [Discuss-gnuradio] USRP IP Address |
Date: |
Thu, 1 Aug 2013 08:45:44 +0100 |
User-agent: |
Mutt/1.5.20 (2009-06-14) |
The last device I received did not appear to have the correct IP set from the
factory.
I had to reset using the "Device recovery and bricking" procedure here:
http://files.ettus.com/uhd_docs/manual/html/usrp2.html#load-the-images-onto-the-on-board-flash-usrp-n-series-only
and set the IP using the "Change the USRP2's IP address" section from the same
page.
On Thu, Aug 01, 2013 at 12:35:42AM -0700, Mohammed Ramadan wrote:
>
>
> Dears,
> i
> Have USRPn210 with SBX daugtherboard. I installed the gnuradio and Uhd.
> But have problem that the PC not see the USRP. i edit the ips to make
> the device 192.168.10.2 and same problem. so, can any one help me to
> connect the USRP with the PC( the IP , DNS, and the Default gatway).
>
> Best Regards,
> M.Ramadan
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio