[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Sampling with multiple USRP N210s with one host c
From: |
Ian Buckley |
Subject: |
Re: [Discuss-gnuradio] Sampling with multiple USRP N210s with one host computer |
Date: |
Thu, 31 Oct 2013 21:25:47 -0700 |
…and cheap switches with a couple of 10G ports and 24 1G ports from folks like
Dell.
On Oct 31, 2013, at 8:06 PM, Marcus D. Leech <address@hidden> wrote:
> On 10/31/2013 04:54 PM, rmsrms1987 wrote:
>> Hi Everyone,
>>
>> I recently discovered that Ettus offer a way of synchronizing up the eight
>> USRPs with the following clock distribution system:
>>
>> https://www.ettus.com/product/details/OctoClock-G
>> <https://www.ettus.com/product/details/OctoClock-G>
>>
>> Out of curiosity, how would one be able to connect and sample with eight
>> separate USRPs with one host computer. Would you need eight separate
>> ethernet ports? That seems like more than what a typical motherboard would
>> be able to handle.
>>
>> Or can the USRPs all be connected to a server, which can be individually
>> accessed through the host computer?
>>
>> Understanding how to do this will be extremely beneficial in order to gather
>> some ideas for a project.
>>
>> Thank you very much in advance,
>> Rob
>>
>>
> You could have all of them on a single port and a 1GiGe switch, depending on
> aggregate sample rate.
>
> But another thing to be concerned about is how much processing your computer
> can handle from 8 sample streams.
>
> There are also quad-port 1GiGe cards available out there.
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Discuss-gnuradio] Sampling with multiple USRP N210s with one host computer,
Ian Buckley <=