Re: [Discuss-gnuradio] Decoding NOAA satellite

[Carlos Alberto Ruiz Naranjo]

Hello,

you can use:

https://github.com/MLAB-project/satellite-observer/tree/master/gr-sat_observer

This is a GNURAdio block to decode NOAA analog signal. It uses:

http://atpdec.sourceforge.net/

2015-10-23 10:29 GMT+02:00 Volker Schroer <address@hidden>:

If you want to decode the apt pictures, you can do this by the means of
gnuradio.

I use a fcdpro+  but it should be possible to use an dongle , too.

To display the decoded image I use
https://github.com/dl1ksv/gr-display

-- Volker

Am 23.10.2015 um 09:03 schrieb alfred noble:

Hi everyone I have RTL2832u and recently I've decoded the data from
NOAA satellite successfully , but I used two windows apps , one SDR#
and the other WXtoImg , now I want to write an app myself that
decodes the data received from the NOAA satellite.I want to know if
any one here has done this before and give me some pieces of advise.
Is it possible to write a program based on C# to receive and decode
the data from NOAA satellite ?

best regards Alfred


_______________________________________________ Discuss-gnuradio
mailing list address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio