Hi Roee,
are you changing the frequency on both the transmitter and receiver?
Because: mixing anything to a higher frequency is exactly that, a
multiplication with a sinusoid.
Best regards,
Marcus
On 13.11.2015 07:01, Roee Bar wrote:
Hello,
I am experiencing some weird behaviour with USRP blocks.
I have a PHY block that generates packets with "packet_len" tag.
This stream is the input to a USRP sink block (the transmitter).
Between packets, my PHY block does not produce anything, so the
USRP assumes zeros until a new packet arrives with “packet_len”
tag (I guess this is what we call 'burst mode'?). The USRP source
(the receiver) receives the signal from the USRP sink as expected
(with zeros between packets).
The problem arises when I change the center frequency from zero to
something higher (I use LFTX/LFRX boards). Then, the received
signal envelop is corrupted like it's multiplied by some cosine
(see screenshot attached, all frames are supposed to have the same
height).
When I don't use the packet_len feature of the USRP block or when
my PHY block produces packets continuously, the received signal is
okay.
Why does this happen? Is my methodology of not producing anything
between packets is the right approach?
Thanks in advance,
Roee
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
|