Re: [Discuss-gnuradio] problem with USRP N210

[Nate Temple]

Assuming the pins are in good condition, another trouble shooting step would be 
to swap the daughter cards between the non-working and working units, to 
determine if it is an issue with the card or the N210. It would not hurt to try 
swapping the connection cables as well to test them.



> On Dec 30, 2015, at 9:27 AM, Marcus D. Leech <address@hidden> wrote:
> 
> On 12/30/2015 12:19 PM, abhinav narain wrote:
>> Hi all,
>> I bought 3 USRPs few months ago and have been using two of them intensively.
>> I used the third one today and found out that it is not working.
>> If I tune into the freq = 2MHz (using basic RX/TX card), I see 
>> notWorking.png as the output, while the other USRPs shows me working.png as 
>> the output.
>> 
>> Will be great if I could know that the box can be returned or how can I 
>> troubleshoot the situation.
>> 
>> thanks,
>> Abhinav
>> 
> The first thing I would do is make certain that the cards in the non-working 
> N210 are installed correctly--check for bent pins on the
>  daughtercard connectors.
> 
> 
> 
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio