[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Questions about transmit and receive with USRP N210 &
From: |
kerry |
Subject: |
[Discuss-gnuradio] Questions about transmit and receive with USRP N210 & GNU 3.6.5 use SBX dboard |
Date: |
Wed, 10 Feb 2016 09:37:20 -0700 (MST) |
Hi,all:
I am trying to transmit something and receive it back using the same USRP
N210 device.
However it fails, or I did not do it correctly.
I run the receiver first use below command:
sudo ./benchmark_rx.py -f 2.45M
Then I run the transmitter use below command:
sudo ./benchmark_tx.py -f 2.45G
The transmitter back "............................."
But the receiver gives me:
TIMEOUT
I changed the frequency also did not work.
What can cause this?
Is this a hardware problem?
I use SBX dboard. I think it can both receive and transmit at the same time.
Or maybe my incorrect operation?
Thanks,
Ke
--
View this message in context:
http://gnuradio.4.n7.nabble.com/Questions-about-transmit-and-receive-with-USRP-N210-GNU-3-6-5-use-SBX-dboard-tp58121.html
Sent from the GnuRadio mailing list archive at Nabble.com.
- [Discuss-gnuradio] Questions about transmit and receive with USRP N210 & GNU 3.6.5 use SBX dboard,
kerry <=