|
From: | West, Nathan |
Subject: | Re: [Discuss-gnuradio] Unable to build on 32-bit Slackware-Current system (cmake configuration problems) |
Date: | Wed, 30 Mar 2016 16:08:48 -0400 |
Hi,
Just tried building on my machine. Slackware64-14.1 with cmake 3.5.1 built from Slackware64-current. I would have tried this on a 32 bit machine but I don't have any running any more. What I found is that cmake 3.5 fails with errors when configuring gnuradio 3.7.9.1 build. I modified the gnuradio.SlackBuild so that ccmake is executed instead of cmake. That way I could see what was configured before trying to compile. With cmake 3.5.1 on the first configure pass I receive the following error messages:
CMake Error at volk/lib/CMakeLists.txt:134 (list):
list sub-command REMOVE_ITEM requires list to be present.
Call Stack (most recent call first):
volk/lib/CMakeLists.txt:159 (OVERRULE_ARCH)
CMake Error at volk/lib/CMakeLists.txt:134 (list):
list sub-command REMOVE_ITEM requires list to be present.
Call Stack (most recent call first):
volk/lib/CMakeLists.txt:188 (OVERRULE_ARCH)
CMake Error at volk/lib/CMakeLists.txt:134 (list):
list sub-command REMOVE_ITEM requires list to be present.
Call Stack (most recent call first):
volk/lib/CMakeLists.txt:258 (OVERRULE_ARCH)
On the second pass:
CMake Error at /usr/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:203 (CMAKE_PARSE_ARGUMENTS):
Unknown CMake command "CMAKE_PARSE_ARGUMENTS".
Call Stack (most recent call first):
/usr/share/cmake-3.5/Modules/FindPythonLibs.cmake:265 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
CMakeLists.txt:234 (find_package)
Eventually, I went to cmake 3.4.3 and gnuradio is building right now. You might want to check your cmake and go to pre 3.5 to see if that is the issue that you are having.
Hope this helps,
Cheers,
Fred
On 03/30/2016 11:28 AM, address@hidden wrote:
Dear All,
I am attempting to build Gnuradio on a 32-bit x86 Slackware-current system but without success. I have tried several approaches.
o Using the Slackbuilds scripts at https://slackbuilds.org/repository/14.1/development/gnuradio/ which builds gnuradio-3.7.8.1.
o Using the Slackbuilds scripts to build the current release gnuradio-3.7.9.1
o Unpacking gnuradio-3.7.9.1 and following the minimal instructions at http://gnuradio.org/redmine/projects/gnuradio/wiki/BuildGuide
o Downloading the default branch from git and following the minimal instructions at http://gnuradio.org/redmine/projects/gnuradio/wiki/BuildGuide
Firstly I found and fixed/worked-around 3 compiler problems encountered with gcc 5.3.0;
(1) -lpthread needed to be added to CMAKE_C_FLAGS and/or CMAKE_CXX_FLAGS. I added it to both.
(2) This fix "sed -i 's/(intrin.h/(x86intrin.h/g' ../volk/lib/CMakeLists.txt" gets around intrin.h not being present.
(3) This fix "sed -i 's/.\+Werror=unused\-command-line\-argument.\+//g' ../volk/lib/CMakeLists.txt" gets around this Warning option not being available.
Then I was able to start the cmake configuration process. However I get errors like this,
/usr/bin/python2: can't open file '/tmp/SBo/gnuradio-3.7.9.1/gen/volk_compile_utils.py': [Errno 2] No such file or directory
This script is present but in the volk sub-directory, ie. in /tmp/SBo/gnuradio-3.7.9.1/volk/gen/volk_compile_utils.py.
Checking the source tarball, eg.
$ tar -tzvf gnuradio-3.7.9.1.tar.gz | grep volk_compile_utils.py
-rw-rw-r-- root/root 2165 2016-02-07 17:09 gnuradio-3.7.9.1/volk/gen/volk_compile_utils.py
confirms this is where it gets unpacked.
I tried a couple of work-arounds,
(1) Symlinking the volk/* directories into the top-level directory before the cmake stage and then repeating this
symlinking in the build directory. Doing this got me some distance (23%) into the make procedure before it failed. See files gnuradio.SlackBuild.try6 &
gnuradio.SlackBuild.try6.log. Some of these directories already exist in the top level & build directories and so can't be symlinked from below.
I can't believe this should be necessary and I presume must be an artifact of something else being amiss...
(2) Editing the volk/lib/CMakeLists.txt list before running cmake and following the Wiki BuildGuide. The following edits/hacks allowed the cmake
to complete but the make failed soon after starting and I gave up at that stage.
sed -i 's/\${CMAKE_SOURCE_DIR}\/gen/${CMAKE_SOURCE_DIR}\/volk\/gen/g' ../volk/lib/CMakeLists.txt
sed -i 's/\${CMAKE_SOURCE_DIR}\/lib\/qa_utils\.cc/\${CMAKE_SOURCE_DIR}\/volk\/lib\/qa_utils.cc/g' ../volk/apps/CMakeLists.txt
See files tom_build.sh & tom_build.log. Again I can't believe this should be necessary.
Please see http://www.mklab.rhul.ac.uk/~tom/tmp-gnuradio.tar.bz2 for all the above mentioned files.
Please help/advise!
Thanks
Tom Crane
I have the following software packages installed,
cmake-3.5.0
boost-1.59.0
cppunit-1.13.2
fftw-3.3.4
python-2.7.11
swig-3.0.7
numpy-1.8.0
doxygen-1.8.9.1
tetex-3.0 (for Latex)
python-cheetah-2.4.4
pygtk-2.24.0
gsl-1.16
qt-4.8.7
qwt-6.1.2
PyQt-4.11.4
wxPython-2.8.12.1
lxml-3.5.0
alsa-lib-1.1.0
jack-audio-connection-kit-0.124.1
portaudio-V19
alsa-oss-1.0.28
sdl-1.2.15
gcc-5.3.0
gcc-g++-5.3.0
make-4.1
Build host CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |