|
From: | Hasini Abeywickrama |
Subject: | Re: [Discuss-gnuradio] USRP B200 Not Transmitting |
Date: | Fri, 2 Sep 2016 09:31:05 +1000 |
DerekThanks,I do not have experience with the dpsk flowgraphs. Have you verified that you can see a simple sinewave from one B200 to another? uhd_fft and uhd_siggen_gui are excellent tools for testing that. When transmitting with the B200, do you see the TX LED come on and the RX LED on the other one?Hello Hasini,The USRP-users mailing list is an excellent place to ask such questions.
http://lists.ettus.com/mailman/listinfo/usrp-users_ lists.ettus.com On Wed, Aug 31, 2016 at 10:31 PM, Hasini Abeywickrama <address@hidden> wrote:______________________________HasiniCheersCan someone please suggest what might be the problem with this. (Please excuse if this is not directly related to GNU Radio)If I user a USRP2 as the transmitter the receiver can receive the signal without any issue.Hi,I have a USRP B200 set to transmit a signal (using uhd_tx_dpsk.grc in the GNURadio examples) and another USRP B200 receive the signal (using uhd_rx_dpsk.grc in the GNURadio examples). But the receiving USRP does not receive the signal that is being transmitted by the other USRP, even though they are placed very close to each other._________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |