[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Tunnel.py with USRP x310
From: |
Julian Arnold |
Subject: |
Re: [Discuss-gnuradio] Tunnel.py with USRP x310 |
Date: |
Fri, 2 Dec 2016 13:49:54 +0100 (CET) |
User-agent: |
nmm Webmail 2.11 |
Hi Danilo,
Just to get it right, so far you have one USRP attached to a PC using a switch?
Is it a gigabit switch? Have you tried to run something like benchmark_rate to
see if the connection works fine?
Also, at the moment I would recommend using the LTS version of UHD 3.9.
Cheers,
Julian
Danilo De Donno schrieb am 01.12.2016 17:21:
>
>
> Hi Julian,
>
> I’m using UHD 3.9.1. For now, I’m trying to run the example with only 1 PC,
> so I have the PC and the USRP both connected to a network switch. Then, I
> plan to add the second PC with its USRP to the switch as well. I think it’s
> should be the configuration in order to have two PCs with different IPs
> belonging to the same subnet, right? However, I’m not expert, so any advice
> is more than welcome.
>
>
>
> Best,
>
> Danilo
>
>
>
>