|
From: | Bastian Bloessl |
Subject: | Re: [Discuss-gnuradio] Reg: gr-ieee 802.11 and wireshark settings for commercial NIC |
Date: | Tue, 6 Dec 2016 04:58:14 +0100 |
Hi,
So AFAIS, this are two problems. - Your custom transmitter is received by gr-ieee802-11, but not by you WiFi card. I guess that’s a configuration issue (see my previous reply). - gr-ieee802-11 is not received by gr-ieee802-11. Please make sure to - reset the flow graphs to their initial state (no parameters changed). Clone the repository again, for example. - try to change the gain - double-check which TX port is used and if an antenna is connected to that port. Best, Bastian
-- Dipl.-Inform. Bastian Bloessl Distributed Embedded Systems Group University of Paderborn, Germany |
[Prev in Thread] | Current Thread | [Next in Thread] |