Re: [Discuss-gnuradio] USRP sink clock rate

[Anon Lister]

What is the difference between these two methods? I seem to be able to use them interchangeably and was wondering the reason to prefer the args string? 

I calculate it based on a multiple of my sample rate in either case. (B2xx if that matters)

On Jun 7, 2017 5:34 AM, "Derek Kozel" <address@hidden> wrote:

Hello Kim,

The first two rates (200e6 and 184.32e6) are for the X310 which only supports those two ADC sampling rates. The third rate (120e6) is no longer supported, I'll get that removed. 30.72e6 is for the AD9361/AD9364 based USRPs (B2x0, E310).

The field is a text field so you can enter any value you want. However for most applications it is best to initialize the device with the master clock rate set in the device arguments. You can supply a string such as "master_clock_rate=61.44e6" into the Device Arguments field in the sink block. If you have a source block using the same USRP the Device Arguments and Device Address fields must be identical between these blocks.

Regards,

Derek

On Wed, Jun 7, 2017 at 9:37 AM, 김태영 <address@hidden> wrote:

Hi all

 

I'm using Ettus Research USRP device with GRC.

And I have one question.

  <The "sampling rate" is the rate at which samples are passed between the host commuter and the USRP.>
  <The "master_clock_rate" is the rate at which samples are passed between FPGA and the RF front end.>

 

Is there anybody who can explain me why the clock rate on UHD:USRP sink block

have only 4 choice? (200, 184.32, 120, 30.72MHz) 

 

 

Regards

Kim taeyeong

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio