[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] USRP GNU radio receiver
From: |
CEL |
Subject: |
Re: [Discuss-gnuradio] USRP GNU radio receiver |
Date: |
Tue, 16 Jul 2019 17:01:10 +0000 |
Look up what a quadrature modulator does. It's just a multiplication
with e^{j2\pi f_{carrier}t}, in the end.
Your constant signal s(t) = c const. would hence be transmitted as
c·e^{j2\pi f_{carrier}t}
whereas a complex sinusoid of frequency f and amplitude a,
s(t) = a·e^{j2\pi f t) would be transmitted as
a·e^{j2\pi f t)·e^{j2\pi f_{carrier}t} = a·e^{j2\pi (f+f_{carrier})t}
so, identical to the constant signal, just at a different frequency.
Best regards,
Marcus
On Tue, 2019-07-16 at 17:53 +0100, Simona Sibio wrote:
> Hi Marcus,
>
> Thank you for tip!
> I know that calibration is not so easy but I hope that.
> Could you help me to understand what happened with a constant complex
> baseband signal?
> I am beginner in this field.
> Thank you for your time.
>
> Best Regards,
>
> Simona
>
> Il giorno mar 16 lug 2019 alle ore 17:39 Müller, Marcus (CEL)
> <address@hidden> ha scritto:
> > Watch out! What do you get at the *output* of your SDR device when you
> > transmit a constant complex baseband signal, mixed to a carrier
> > frequency? How does that differ from transmitting a complex baseband
> > sinusoid mixed to a carrier frequency?
> >
> > On Tue, 2019-07-16 at 18:32 +0200, sumit kumar wrote:
> > > Ok, so for a constant source, in the time domain you will see a flat
> > > signal only! Try connecting a spectrum analyzer and you shud see a peak
> > > at DC becz Fourier transform of constant signal is impulse.
> > > And yes, as Marcus said, increase the sampling rate!
> > >
> > >
> > > On Tue, 16 Jul 2019 at 18:06, Simona Sibio <address@hidden> wrote:
> > > > Thank you for the assistance.
> > > >
> > > > I put the module "constant source" in my flow grap.
> > > > With this module, I can choose witch amplitude I want to send.
> > > > I attached the flow graph.
> > > > And, I would want to read these values in the receiver.
> > > >
> > > > Simona
> > > >
> > > > Il giorno mar 16 lug 2019 alle ore 16:58 sumit kumar <address@hidden>
> > > > ha scritto:
> > > > > Hi Simona, what is the "constant signal" here ?
> > > > >
> > > > > On Tue, 16 Jul 2019 at 17:54, Simona Sibio <address@hidden> wrote:
> > > > > > Hi all,
> > > > > >
> > > > > > I want to use GNU radio to measure the amplitude and the phase of a
> > > > > > signal.
> > > > > > I send a constant signal with the transmitter USRP but in the
> > > > > > receiver there is a flat signal with amplitude 0 and offset 0.
> > > > > > I tried to send a sine signal and the receveir works fine.
> > > > > > How can I do to send only a constant and measure the amplitude?
> > > > > >
> > > > > > Thank you for your time.
> > > > > >
> > > > > > Simona
> > > > > >
> > > > > > _______________________________________________
> > > > > > Discuss-gnuradio mailing list
> > > > > > address@hidden
> > > > > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> > > > >
> > > > >
> > > > > --
> > > > > Sumit Kumar
> > > > >
> > > > >
> > >
> > >
> > > _______________________________________________
> > > Discuss-gnuradio mailing list
> > > address@hidden
> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
smime.p7s
Description: S/MIME cryptographic signature
- [Discuss-gnuradio] USRP GNU radio receiver, Simona Sibio, 2019/07/16
- Re: [Discuss-gnuradio] USRP GNU radio receiver, sumit kumar, 2019/07/16
- Re: [Discuss-gnuradio] USRP GNU radio receiver, sumit kumar, 2019/07/16
- Re: [Discuss-gnuradio] USRP GNU radio receiver, CEL, 2019/07/16
- Re: [Discuss-gnuradio] USRP GNU radio receiver, Simona Sibio, 2019/07/16
- Re: [Discuss-gnuradio] USRP GNU radio receiver,
CEL <=
- Re: [Discuss-gnuradio] USRP GNU radio receiver, Simona Sibio, 2019/07/16
- Message not available
- Message not available
- Re: [Discuss-gnuradio] USRP GNU radio receiver, CEL, 2019/07/16
- Re: [Discuss-gnuradio] USRP GNU radio receiver, Simona Sibio, 2019/07/17
- Re: [Discuss-gnuradio] USRP GNU radio receiver, CEL, 2019/07/17
- Re: [Discuss-gnuradio] USRP GNU radio receiver, Simona Sibio, 2019/07/17
- Re: [Discuss-gnuradio] USRP GNU radio receiver, Kyeong Su Shin, 2019/07/17
- Re: [Discuss-gnuradio] USRP GNU radio receiver, Simona Sibio, 2019/07/18
- Re: [Discuss-gnuradio] USRP GNU radio receiver, Jonas Manthey, 2019/07/18
- Re: [Discuss-gnuradio] USRP GNU radio receiver, Simona Sibio, 2019/07/18
- Re: [Discuss-gnuradio] USRP GNU radio receiver, Simona Sibio, 2019/07/18