Hi Joe,
Cinaed rang a bell, I have borrowed a HackRF from a neighboring department and wanted to test it on a pure GRC Windows installation. I don’t recall the exact errors, but it looked something like
yours.
I searched for a windows driver of the HackRF, but didn’t find one and finally switched to the USRP B210. I bought for me privately one of these cheaper Chinese clones and got it running on Windows.
Maybe you could try to run a Pentoo Linux from iso-image
https://github.com/mossmann/hackrf/wiki/Getting-Started-with-HackRF-and-GNU-Radio
and see if this helps?
Cheers, Bernd
From: Discuss-gnuradio <discuss-gnuradio-bounces+bernd.schleicher=address@hidden>
On Behalf Of Cinaed Simson
Sent: Dienstag, 14. April 2020 20:43
To: address@hidden
Subject: Re: HackRF
Hi Joe - I just noticed you're running the HackRF in a virtualmachine on a PC - which implies you're most likely having problems with the USB drivers on Windows.
I don't know anything about Windows.
-- Cinaed
On 4/14/20 12:16 AM, Joe crossen wrote:
I have a HackRF One connected to my PC, and a virtual machine running Ubunutu 18.04. Getting the following error when running my flow graph (Osmocom source to WX GUI Scope Sink).
Traceback (most recent call last):
File "/home/mike/GNURadio/Programs/HackRF_rx_Osmocom_GUI.py", line 97, in <module>
main()
File "/home/mike/GNURadio/Programs/HackRF_rx_Osmocom_GUI.py", line 91, in main
tb = top_block_cls()
File "/home/mike/GNURadio/Programs/HackRF_rx_Osmocom_GUI.py", line 59, in __init__
self.osmosdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + '' )
File "/usr/local/lib/python2.7/dist-packages/osmosdr/osmosdr_swig.py", line 1170, in make
return _osmosdr_swig.source_make(*args, **kwargs)
RuntimeError: No supported devices found (check the connection and/or udev rules).
hackrf_info version: unknown
libhackrf version: unknown (0.5)
Found HackRF
Index: 0
Serial number: 000000000000000057b068dc24726163
Board ID Number: 2 (HackRF One)
Firmware Version: 2018.01.1 (API:1.02)
Part ID Number: 0xa000cb3c 0x0058474c
sudo apt install hackrf libhackrf-dev
gr-osmocom (gr3.7 branch)
I've been googling for hours.
I followed this guide to add a udev file to /etc/udev/rules.d
Does anyone have any ideas?