Re: Compiling/installing GNURadio for the STM32MP157C-EV1 board (STM32MP1 processor)

[Philip Balister]

Also note ST supports the Yocto project, you should be able to add

https://github.com/balister/sdr-build/tree/dunfell-qemu

to their BSP and get images with gnuradio. I might even poke at this a
little to get an idea how good their BSP is.

Philip



On 6/4/20 3:40 AM, Henrique Do Carmo Miranda wrote:
> Hi all,
> 
> I would like to install and test GnuRadio on the STM32MP157C-EV1 processor 
> evaluation board for the STM32MP1 processor 
> (https://www.st.com/content/st_com/en/products/evaluation-tools/product-evaluation-tools/mcu-mpu-eval-tools/stm32-mcu-mpu-eval-tools/stm32-eval-boards/stm32mp157c-ev1.html
>  
> <https://www.st.com/content/st_com/en/products/evaluation-tools/product-evaluation-tools/mcu-mpu-eval-tools/stm32-mcu-mpu-eval-tools/stm32-eval-boards/stm32mp157c-ev1.html>),
>  along with the USRP B205mini.
> 
> Do any of you know if compiling and installing GNURadio on this platform has 
> been attempted before, and if so do you have any pointers that can guide me 
> through that process - could not find any info on it (just wondering if 
> compiled images might be out there)? 
> 
> If not, setting up a Linux machine with all the tools to cross-compile 
> GNUradio for the STM32MP1 target would be the way to go here?
> Would https://wiki.gnuradio.org/index.php/Embedded_Development_with_GNU_Radio 
> <https://wiki.gnuradio.org/index.php/Embedded_Development_with_GNU_Radio> be 
> the best guide to this process?
> 
> 
> Thanks much for your help,
> Henrique
> 
>