Re: R: Re: Gnuradio / Ubuntu 20.10

[Ralf Gorholt]

Hi Marcus,

to be precise: I use Linux Mint 20.1 which is based on Ubuntu.

Effectively, the gr-osmosdr module version 0.2.0-2 works with the
version of GNU Radio that is available by default in this Linux Mint
version (3.8.1-rc1-2build2) but as far as I remember, it did not work
with GNU Radio 3.8.2, the GNU Radio version that I have installed.
That's the reason why I have compiled it from source.

Kind regards,

Ralf

Am 11.04.2021 um 17:31 schrieb Marcus Müller:
> Hi Ralf,
>
> glad to hear you've got it to work!
>
> When not using the PPA (which I was assuming you'd be doing), you'd get the 
> exact
> gr-osmosdr that works with Ubuntu's version of GNU Radio (i.e. 3.8.1.0 as I 
> thought you've
> installed?).
>
> Best regards,
> Marcus
>
> On 11.04.21 16:40, Ralf Gorholt wrote:
> > Hello Marcus,
> >
> > I had done this before (installed from PPA) but I didn't get a module
> > that worked with GNU Radio 3.8.2. That's why I have compiled it from
> > source. When the module is compiled, you have to pay attention to the
> > correct prefix for cmake.
> >
> > Ralf
> >
> > Am 11.04.2021 um 14:37 schrieb Marcus Müller:
> > > You have to do none of this,
> > >
> > > sudo apt install gr-osmosdr
> > >
> > > does everything. And then you're done and can use the OSMOSDR Source or the 
> > > RTL-Source
> > > (which are essentially the same).
> > >
> > > Cheers,
> > > Marcus
> > >
> > > On 11.04.21 13:26, Ralf Gorholt wrote:
> > > > Hello Alberto,
> > > >
> > > > you may try this:
> > > >
> > > > git clone git://github.com/osmocom/gr-osmosdr -b gr3.8
> > > >
> > > > That's how I got the sources for GNU Radio 3.8 one or two weeks ago.
> > > >
> > > > Regards,
> > > >
> > > > Ralf
> > > >
> > > > Am 11.04.2021 um 12:35 schrieb alberto.alletto@alice.it:
> > > > > I follow now this guide:
> > > > > https://lists.gnu.org/archive/html/discuss-gnuradio/2020-09/pdfNp27msymbN.pdf
> > > > >
> > > > > But at point 7 i have a problem.
> > > > >
> > > > > alberto@alberto-Studio-XPS-1340:~/sdr_stuff$ git clone 
> > > > > https://git.osmocom.org/gr-osmosdr
> > > > > Clone in 'gr-osmosdr' in corso...
> > > > > error: Failed to connect to git.osmocom.org port 443: Connessione scaduta 
> > > > > (curl_result =
> > > > > 7, http_code = 0, sha1 = 3d94e1a5d172fc93da9e9638536ee773f4b5a85a)
> > > > > error: Unable to find 99f14f4991f4154d743fd08b9c49e4eaf8a70001 under
> > > > > https://git.osmocom.org/gr-osmosdr
> > > > > Cannot obtain needed blob 99f14f4991f4154d743fd08b9c49e4eaf8a70001
> > > > > while processing commit 2d504bde50a0c560a9d31b7b38982bd44cc7fe9d.
> > > > > error: recupero non riuscito.
> > > > > alberto@alberto-Studio-XPS-1340:~/sdr_stuff$
> > > > >
> > > > >       ----Messaggio originale----
> > > > >       Da: fabian@opencode.eu
> > > > >       Data: 10-apr-2021 22.08
> > > > >       A: <discuss-gnuradio@gnu.org>
> > > > >       Ogg: Re: Gnuradio / Ubuntu 20.10
> > > > >
> > > > >       Hi Alberto,
> > > > >       Just open a terminal and run
> > > > >       sudo apt install gnuradio
> > > > >       And you should be fine. The dependencies for the rtl-sdr are already 
> > > > > included.
> > > > >       It is probably not the latest&greatest version of gnuradio, but IT should 
> > > > > get you
> > > > >       started.
> > > > >
> > > > >       Fabian
> > > > >
> > > > >       Am 10. April 2021 21:38:47 MESZ schrieb Alberto Alletto 
> > > > > <alberto.alletto@alice.it>:
> > > > >
> > > > >           Hi!
> > > > >           I’m new on ubuntu world.
> > > > >           Today i have installed ubuntu 20.10 and i want install Gnuradio to 
> > > > > work with
> > > > > RTL-SDR receiver.
> > > > >
> > > > >           what is the correct procedure to install gnuradio to work with the 
> > > > > rtl-sdr
> > > > > receiver?
> > > > >
> > > > >           Tnx
> > > > >           Alberto
> > > > >
> > > > >           Inviato da iPhone