Also, you may want to install the rtl software
apt install rtl-sdr librtlsdr
It's possible they may have been installed with gr-osmosdr.
-- Cinaed
I have followed pdf guide and now work fine but....
It work fine but after oper FFT window (QT GUI SINK) there is
this alert:
Warning: failed to XInitThreads()
gr-osmosdr 0.2.0.0 (0.2.0) gnuradio 3.8.1.0
why ?
Alberto
----Messaggio originale----
Da: mueller@kit.edu
Data: 11-apr-2021 17.31
A: <discuss-gnuradio@gnu.org>
Ogg: Re: R: Re: Gnuradio / Ubuntu 20.10
Hi Ralf,
glad to hear you've got it to work!
When not using the PPA (which I was assuming you'd be doing),
you'd get the exact
gr-osmosdr that works with Ubuntu's version of GNU Radio (i.e.
3.8.1.0 as I thought you've
installed?).
Best regards,
Marcus
On 11.04.21 16:40, Ralf Gorholt wrote:
> Hello Marcus,
>
> I had done this before (installed from PPA) but I didn't
get a module
> that worked with GNU Radio 3.8.2. That's why I have
compiled it from
> source. When the module is compiled, you have to pay
attention to the
> correct prefix for cmake.
>
> Ralf
>
> Am 11.04.2021 um 14:37 schrieb Marcus Müller:
>> You have to do none of this,
>>
>> sudo apt install gr-osmosdr
>>
>> does everything. And then you're done and can use the
OSMOSDR Source or the RTL-Source
>> (which are essentially the same).
>>
>> Cheers,
>> Marcus
>>
>> On 11.04.21 13:26, Ralf Gorholt wrote:
>>> Hello Alberto,
>>>
>>> you may try this:
>>>
>>> git clone git://github.com/osmocom/gr-osmosdr -b
gr3.8
>>>
>>> That's how I got the sources for GNU Radio 3.8 one
or two weeks ago.
>>>
>>> Regards,
>>>
>>> Ralf
>>>
>>> Am 11.04.2021 um 12:35 schrieb
alberto.alletto@alice.it:
>>>> I follow now this guide:
>>>> https://lists.gnu.org/archive/html/discuss-gnuradio/2020-09/pdfNp27msymbN.pdf
>>>>
>>>> But at point 7 i have a problem.
>>>>
>>>> alberto@alberto-Studio-XPS-1340:~/sdr_stuff$
git clone https://git.osmocom.org/gr-osmosdr
>>>> Clone in 'gr-osmosdr' in corso...
>>>> error: Failed to connect to git.osmocom.org
port 443: Connessione scaduta (curl_result =
>>>> 7, http_code = 0, sha1 =
3d94e1a5d172fc93da9e9638536ee773f4b5a85a)
>>>> error: Unable to find
99f14f4991f4154d743fd08b9c49e4eaf8a70001 under
>>>> https://git.osmocom.org/gr-osmosdr
>>>> Cannot obtain needed blob
99f14f4991f4154d743fd08b9c49e4eaf8a70001
>>>> while processing commit
2d504bde50a0c560a9d31b7b38982bd44cc7fe9d.
>>>> error: recupero non riuscito.
>>>> alberto@alberto-Studio-XPS-1340:~/sdr_stuff$
>>>>
>>>> ----Messaggio originale----
>>>> Da: fabian@opencode.eu
>>>> Data: 10-apr-2021 22.08
>>>> A: <discuss-gnuradio@gnu.org>
>>>> Ogg: Re: Gnuradio / Ubuntu 20.10
>>>>
>>>> Hi Alberto,
>>>> Just open a terminal and run
>>>> sudo apt install gnuradio
>>>> And you should be fine. The dependencies
for the rtl-sdr are already included.
>>>> It is probably not the latest&greatest
version of gnuradio, but IT should get you
>>>> started.
>>>>
>>>> Fabian
>>>>
>>>> Am 10. April 2021 21:38:47 MESZ schrieb
Alberto Alletto <alberto.alletto@alice.it>:
>>>>
>>>> Hi!
>>>> I’m new on ubuntu world.
>>>> Today i have installed ubuntu 20.10
and i want install Gnuradio to work with
>>>> RTL-SDR receiver.
>>>>
>>>> what is the correct procedure to
install gnuradio to work with the rtl-sdr
>>>> receiver?
>>>>
>>>> Tnx
>>>> Alberto
>>>>
>>>> Inviato da iPhone
>>>>
>>>>
>>>>
>
>
|