[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: SoapySDR Question
From: |
Glen Langston |
Subject: |
Re: SoapySDR Question |
Date: |
Thu, 30 Sep 2021 22:22:38 -0400 |
Hi Jeff,
Thanks for your quick reply.
I was having trouble figuring out what to put in the Soapy Source block.
Do you have a flow graph example?
Thanks
Glen
In the mean time I’ll try pybombs
> On Sep 30, 2021, at 9:11 PM, Jeff Long <willcode4@gmail.com> wrote:
>
> I installed gr-soapy for 3.8 (using PyBOMBS), plugged in a RSP1A, and it
> worked. This is the LibreSpace code, as we don't have in-tree Soapy support
> in 3.8.
>
> I'd already installed the soapy libs (v0.8.1-g1cf5a539) and driver modules,
> also via PyBOMBS. Make sure it's not a soapy or usb problem by running
>
> SoapySDRUtil --probe
>
> My test was just a Soapy Source connected to a QT GUI Sink. Sample rate is
> 1M, and so is the bandwidth in the Soapy Source on the RF tab. Don't know if
> that matters. Everything else is defaults.
>
> On Thu, Sep 30, 2021 at 8:46 PM Glen Langston <glen.i.langston@gmail.com>
> wrote:
> Thanks for all everyone's efforts.
>
> We hope to give them a try.
>
> I’ve got a Soapy SDR question. Does anyone have a SDRPlay RSP1A running
> with Gnuradio 3.8. I’ve not been able to find a running example.
>
> Please send a link, if you’ve got a good example.
>
> Thanks!
>
> Glen
>
> For our successes in Radio Astronomy work see the memos at
> https://github.com/WVURAIL/lightwork
>
>
> > On Sep 30, 2021, at 7:39 PM, Jeff Long <willcode4@gmail.com> wrote:
> >
> > GNU Radio has released v3.8.4.0 and v3.9.3.0, hitting the September target
> > date with hours to spare. For details, see the Github release pages:
> >
> > https://github.com/gnuradio/gnuradio/releases/tag/v3.8.4.0
> > https://github.com/gnuradio/gnuradio/releases/tag/v3.9.3.0
> >
> > Next releases are expected in December.
>