Hi!
This is what appears:
itupac@itupac:/usr/local/lib/uhd/utils$ ./usrp_burn_mb_eeprom --args "addr=192.168.10.3" --read-all
Creating USRP device from address: addr=192.168.10.3
[INFO] [UHD] linux; GNU C++ version 7.4.0; Boost_106501; UHD_3.14.0.HEAD-0-g6875d061
[INFO] [USRP2] Opening a USRP2/N-Series device...
[INFO] [USRP2] Current recv frame size: 1472 bytes
[INFO] [USRP2] Current send frame size: 1472 bytes
[WARNING] [USRP2] Unable to identify device - assuming USRP2/N-Series device
[WARNING] [UHD] Unable to set the thread priority. Performance may be negatively affected.
Please see the general application notes in the manual for instructions.
EnvironmentError: OSError: error in pthread_setschedparam
Fetching current settings from EEPROM...
EEPROM ["hardware"] is ""
EEPROM ["revision"] is ""
EEPROM ["product"] is ""
EEPROM ["mac-addr"] is "00:00:00:00:40:00"
EEPROM ["ip-addr"] is "192.168.10.3"
EEPROM ["subnet"] is "0.0.0.104"
EEPROM ["gateway"] is "255.255.255.255"
EEPROM ["gpsdo"] is "none"
EEPROM ["serial"] is "0"
EEPROM ["name"] is ""
Power-cycle the USRP device for the changes to take effect.
Done
[WARNING] [UHD] Unable to set the thread priority. Performance may be negatively affected.
Please see the general application notes in the manual for instructions.
EnvironmentError: OSError: error in pthread_setschedparam