Please do not send me images.
Instead, when the system slows down, open a cmd windows and type
systeminfo | find "Available Physical Memory"
-- Cinaed
On 1/19/23 05:48, SHAKTHIVEL S 2021
Batch,PES University wrote:
I am running the flowgraph graph on Windows10
Anaconda 3 GNURADIO 3.10. As it was not even running in my dual
booted DragonOS 20.04 gnuradio version 3.8.1.I thought of trying
in windows then it worked but not decoding the symbols. It is
throwing some pagesize error. But the symbols are overlapping
on one another.Below I combined both transmission and reception
to decrease latency but no use.
Thanks
I have attached few screen shots
Hi - are you running
running under Windows or Linux on the PC.
And are you running a virtual machine?
Check memory usage.
It's possible your using swap as memory-and are constantly
swapping the memory to disk - which will slow you to crawl.
-- Cinaed
On 1/18/23 15:52, SHAKTHIVEL S 2021 Batch,PES
University wrote:
It is an adaptive site I changed the
blocks accordingly to 3.10 . I am simulating this on my
PC. It is lagging like a hell. Can anyone give some tips
to increase speed? Or I have to bear with this? The
symbols are not getting decided other side due to this
In 3.10 blocks got moved around right?
To symbol sync and linear eq stuff?
Bit
confused; you're using GNU Radio 3.10, but you
specifically read a version of the
tutorial that is marked as *not* applying to 3.10?
On 18.01.23 17:13, SHAKTHIVEL S 2021 Batch,PES
University wrote:
> I tried running the Packet Commication
example given in gnuradio documentation using gr38
> embedded block. It throwed me this error
> "pagesize :error: no info; setting pagesize =
4096"
> Although this is not an error strictly it
reduced the performance of the flowgraph
> drastically and I couldn't decode the message
on the receiver side.The constellation are
> overlapping and trying to move away slowly.
Any help would be appreciated
> Link to the site:https://wiki.gnuradio.org/index.php/Packet_Communications?ver1=3.8
> <https://wiki.gnuradio.org/index.php/Packet_Communications?ver1=3.8>
>
>
>
|