[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc")
From: |
bertrand |
Subject: |
Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc") |
Date: |
Thu, 22 Mar 2018 10:29:22 +0100 |
>
> >>> 4. The script on the wiki builds and install gnustep-make two times :
> >>> before and after libobjc2 ? Is it still correct ?
> >>
> >> No, that’s definitely wrong. It dates back to when I tried to use GNUstep
> >> Make to build libobjc2, but that led to circular dependencies.
> >>
> > Then should I build libobjc2 before of after gnustep-make ?
>
> After. Now libobjc2 doesn’t depend on GNUstep Make.
>
> David
>
Hi everyone,
I'm trying now to build base and failed.
I've tried all that I could find on the list or on the internet:
- building make twice or only once after libobjc2
- installing libobjc2 in /usr , /usr/local, or even
in /usr/GNUstep/Local/Library/Libraries/ (I use GNUstep layout) by hand
- building without gcc's gobjc-4.9.deb and gobjc++-4.9.deb (I thought
they weren't mandatory) or with them.
I've even added --enable-install-ld-so-conf to gnustep-make configure.
My configure options for make are :
./configure --enable-debug-by-default --with-layout=gnustep
-enable-objc-nonfragile-abi -enable-objc-arc --enable-install-ld-so-conf
and I had set OBJCFLAGS="-fblocks -fobjc-runtime=gnustep-1.8.1" before
the last install of make and run ldconfig just before configuring base.
Each time, the configure step of base fails with the well-known and
infamous:
> checking whether objc really works... no
> I don't seem to be able to use your Objective-C compiler to produce
> working binaries! Please check your Objective-C compiler installation.
> If you are using gcc-3.x make sure that your compiler's libgcc_s and libobjc
> can be found by the dynamic linker - usually that requires you to play
> with LD_LIBRARY_PATH or /etc/ld.so.conf.
> Please refer to your compiler installation instructions for more help.
> configure: error: The Objective-C compiler does not work or is not installed
> properly.
Here is attached my config log attached, when gnustep-make was installed
before and after libobjc2, ithout gobjc-4.9.
Any idea ?
Bertrand
config.log
Description: Text Data
- libobjc2 and powerpc., bertrand, 2018/03/19
- Re: libobjc2 and powerpc., Fred Kiefer, 2018/03/19
- Re: libobjc2 and powerpc., David Chisnall, 2018/03/20
- Re: libobjc2 and powerpc., bertrand, 2018/03/20
- Re: libobjc2 and powerpc., David Chisnall, 2018/03/21
- GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"), bertrand, 2018/03/21
- Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"), David Chisnall, 2018/03/21
- Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"), bertrand, 2018/03/21
- Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"), David Chisnall, 2018/03/21
- Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"),
bertrand <=
- Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"), Wolfgang Lux, 2018/03/22
- Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"), Richard Frith-Macdonald, 2018/03/22
- Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"), bertrand, 2018/03/22
- Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"), Richard Frith-Macdonald, 2018/03/22
- Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"), bertrand, 2018/03/22
- Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"), Richard Frith-Macdonald, 2018/03/22
- Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"), bertrand, 2018/03/22
- Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"), Josh Freeman, 2018/03/22
- Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"), Josh Freeman, 2018/03/21
- Re: GNUstep + libobjc2 and powerpc ( was "libobjc2 on powerpc"), David Chisnall, 2018/03/21