[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: GNUstep web install script
From: |
H . Nikolaus Schaller |
Subject: |
Re: GNUstep web install script |
Date: |
Mon, 14 Sep 2020 14:32:07 +0200 |
> Am 13.09.2020 um 09:37 schrieb Gregory Casamento <greg.casamento@gmail.com>:
>
>
> Nikolaus,
>
> What does "uname -a" return for this system?
root@letux:~# uname -a
Linux letux 5.9.0-rc5-letux-l400+ #3415 SMP PREEMPT Mon Sep 14 11:05:48 CEST
2020 mips GNU/Linux
root@letux:~#
root@letux:~# cat /etc/debian_version
bullseye/sid
root@letux:~#
root@letux:~# cat /proc/cpuinfo
system type : JZ4780
machine : img,ci20
processor : 0
cpu model : Ingenic XBurst V4.15 FPU V0.0
BogoMIPS : 1196.85
wait instruction : yes
microsecond timers : no
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes, count: 1, address/irw mask: [0x0fff]
isa : mips1 mips2 mips32r1 mips32r2
ASEs implemented :
shadow register sets : 1
kscratch registers : 0
package : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
processor : 1
cpu model : Ingenic XBurst V4.15 FPU V0.0
BogoMIPS : 1202.58
wait instruction : yes
microsecond timers : no
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes, count: 1, address/irw mask: [0x0fff]
isa : mips1 mips2 mips32r1 mips32r2
ASEs implemented :
shadow register sets : 1
kscratch registers : 0
package : 0
core : 1
VCED exceptions : not available
VCEI exceptions : not available
root@letux:~#
> I believe I have solved a number of issues here and I might be able to make
> it possible for you to install on this platform.
>
> GC
>
> On Wed, Aug 26, 2020 at 5:03 AM H. Nikolaus Schaller <hns@goldelico.com>
> wrote:
>
> > Am 24.08.2020 um 01:46 schrieb Gregory Casamento <greg.casamento@gmail.com>:
> >
> > /bin/bash -c "$(curl -fsSL
> > https://raw.githubusercontent.com/gnustep/tools-scripts/master/gnustep-web-install)"
>
> I gave it a try on the MIPS JZ4780 CI20 board (where HDMI is working since
> last week with a v5.9 kernel) with Debian Bullseye.
> Here are some experiences:
>
> 1. curl wasn't installed to start the command - but that is easy to fix
> 2. the script still prints "Get sudo and curl..." - which must have been
> installed before
> 3. started cloning a lot of files
> 4. there was one message about "warning: Pulling without specifying how to
> reconcile divergent branches is discouraged." (Cloning into 'tools-make')
> 5. it did install gobjc-10 and clang-9 (and some more packages)
> 6. succeeds: ======== Installing Make...
> 7. fails: ======== Installing libobjc2...
>
> for example:
>
> [ 6%] Building C object CMakeFiles/objc.dir/statics_loader.c.o
> [ 6%] Building ASM object CMakeFiles/objc.dir/block_trampolines.S.o
> [ 6%] Building ASM object CMakeFiles/objc.dir/objc_msgSend.S.o
> <instantiation>:1:6: error: invalid operand for instruction
> move SARG1, SARG0
> ^
> /tmp/libobjc2/block_trampolines.S:167/tmp/libobjc2/objc_msgSend.S:14:2:
> warning: objc_msgSend() not implemented for your architecture [-W#warnings]
> :2: #warning objc_msgSend() not implemented for your architecture
> ^
> 1 warning generated.
> note: while in macro instantiation
> trampoline SARG0, SARG1
> ^
> <instantiation>:2:5: error: invalid operand for instruction
> lw SARG0, -4096($25)
> ^
> /tmp/libobjc2/block_trampolines.S:167:2: note: while in macro instantiation
> trampoline SARG0, SARG1
> ^
> gmake[2]: *** [CMakeFiles/objc.dir/build.make:327:
> CMakeFiles/objc.dir/block_trampolines.S.o] Error 1
> gmake[2]: *** Waiting for unfinished jobs....
> gmake[2]: Leaving directory '/tmp/libobjc2/build'
>
> 6. continues despite earlier errors: ======== Installing libpwq...
> 7. fails ======== Installing libdispatch...
>
> for example:
>
> CMake Error at
> /usr/share/cmake-3.16/Modules/FindPackageHandleStandardArgs.cmake:146
> (message):
> Could NOT find kqueue (missing: KQUEUE_INCLUDE_DIRS)
> Call Stack (most recent call first):
> /usr/share/cmake-3.16/Modules/FindPackageHandleStandardArgs.cmake:393
> (_FPHSA_FAILURE_MESSAGE)
> cmake/Findkqueue.cmake:20 (find_package_handle_standard_args)
> CMakeLists.txt:64 (find_package)
>
> 8. continues: ======== Installing Base...
>
> configure: WARNING: You are running configure with the link options
> (-fuse-ld=gold ) set to a different value from that used by gnustep-make
> (-fuse-ld=gold). To avoid conflicts/problems, reconfigure/reinstall
> gnustep-make to use LDFLAGS=-fuse-ld=gold or run the gnustep-base configure
> again with your LDFLAGS environment variable set to -fuse-ld=gold
>
> Do you notice the space character after "-fuse-ld=gold"?
>
> The build continues a little with some more fatal errors but leaves me not
> with a working system.
> The main reason seems to be system dependencies.
>
> So I am not sure if this approach can solve all installation issues...
>
> Another question that came to my mind is how to update such an installation.
> Do I have to reinstall?
> Can I run it again? There are no packages installed?
>
> So maybe a better strategy would be to provide a package repository with the
> latest packages
> and provide templates e.g. for /etc/apt/sources.list.d/gnustep.list
>
> Then simply instruct users to run: apt-get update; apt-get install gnustep
>
> Well, that would be orthogonal to your idea to support multiple BaseOS with a
> single script.
>
> So far my first experiences with the script.
> Summary:
> * good idea
> * failed to create a working setup
> * leaves questions about how to install upgrade
>
> BR and thanks,
> Nikolaus
>
> Here is the full build log (too big for attaching to the list):
> https://download.goldelico.com/quantumstep/other/gnustep.log
>
>
>
>
> --
> Gregory Casamento
> GNUstep Lead Developer / OLC, Principal Consultant
> http://www.gnustep.org - http://heronsperch.blogspot.com
> https://www.patreon.com/bePatron?u=352392 - Become a Patron
> https://gf.me/u/x8m3sx - My GNUstep GoFundMe
> https://teespring.com/stores/gnustep - Store