From: Kris Kennaway <address@hidden>
Date: May 21, 2004 8:10:17 PM EDT
To: address@hidden, address@hidden
Subject: address@hidden: libjit-0.0.2 failed on
sparc64 5]
FYI; can you please investigate and/or report to the developers?
Kris
----- Forwarded message from User Ports-sparc64
<address@hidden> -----
X-Original-To: address@hidden
Delivered-To: address@hidden
Delivered-To: address@hidden
Date: Fri, 21 May 2004 12:41:00 -0700 (PDT)
From: User Ports-sparc64 <address@hidden>
To: address@hidden
Subject: libjit-0.0.2 failed on sparc64 5
X-UIDL: >gb"!"a?!!ZTb"!2G1!!
X-Bogosity: No, tests=bogofilter, spamicity=0.000000, version=0.17.5
building libjit-0.0.2 on deo-ultra5
in directory /x/tmp/5/chroot/23173
with arguments: libjit-0.0.2.tbz /usr/ports/lang/libjit
expat-1.95.7.tbz gettext-0.13.1_1.tbz gmake-3.80_2.tbz
libiconv-1.9.1_3.tbz
maintained by: address@hidden
build started at Fri May 21 19:29:51 GMT 2004
adding dependencies
pkg_add expat-1.95.7.tbz
pkg_add gettext-0.13.1_1.tbz
pkg_add gmake-3.80_2.tbz
pkg_add libiconv-1.9.1_3.tbz
skipping libiconv-1.9.1_3, already added
================================================================
====================<phase 1: make checksum>====================
===> Vulnerability check disabled
libjit-0.0.2.tar.gz doesn't seem to exist in /tmp/distfiles/.
Attempting to fetch from
ftp://ftp-master.freebsd.org/pub/FreeBSD/ports/distfiles//.
fetch:
ftp://ftp-master.freebsd.org/pub/FreeBSD/ports/distfiles//libjit
-0.0.2.tar.gz: File unavailable (e.g., file not found, no access)
Attempting to fetch from
ftp://bento.freebsd.org/pub/FreeBSD/distfiles//.
fetch:
ftp://bento.freebsd.org/pub/FreeBSD/distfiles//libjit-0.0.2.tar.gz:
File unavailable (e.g., file not found, no access)
Attempting to fetch from http://www.southern-storm.com.au/download/.
libjit-0.0.2.tar.gz 189 kB 189 kBps
Checksum OK for libjit-0.0.2.tar.gz.
====================<phase 2: make package>=====================
===> Vulnerability check disabled
===> Extracting for libjit-0.0.2
Checksum OK for libjit-0.0.2.tar.gz.
===> Patching for libjit-0.0.2
===> Applying FreeBSD patches for libjit-0.0.2
===> libjit-0.0.2 depends on executable: gmake - found
===> Configuring for libjit-0.0.2
creating cache ./config.cache
checking host system type... sparc64-portbld-freebsd5.2
checking target system type... sparc64-portbld-freebsd5.2
checking build system type... sparc64-portbld-freebsd5.2
checking for a BSD compatible install... /usr/bin/install -c -o root
-g wheel
checking whether build environment is sane... yes
checking whether gmake sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking if building for some Win32 platform... no
checking for gawk... no
checking for mawk... no
checking for nawk... nawk
checking for gcc... cc
checking whether the C compiler (cc -O -pipe ) works... yes
checking whether the C compiler (cc -O -pipe ) is a cross-compiler...
no
checking whether we are using GNU C... yes
checking whether cc accepts -g... yes
checking for c++... c++
checking whether the C++ compiler (c++ -O -pipe ) works... yes
checking whether the C++ compiler (c++ -O -pipe ) is a
cross-compiler... no
checking whether we are using GNU C++... yes
checking whether c++ accepts -g... yes
checking for a BSD compatible install... /usr/bin/install -c -o root
-g wheel
checking whether ln -s works... yes
checking whether gmake sets ${MAKE}... (cached) yes
checking for bison... no
checking for byacc... byacc
checking how to run the C preprocessor... cc -E
checking for flex... flex
checking for flex... (cached) flex
checking for yywrap in -lfl... yes
checking lex output file root... lex.yy
checking whether yytext is a pointer... yes
checking for ranlib... ranlib
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD-compatible nm... /usr/bin/nm -B
updating cache ./config.cache
checking for object suffix... o
checking for executable suffix... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions ... no
checking if cc static flag -static works... -static
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the linker (/usr/bin/ld) supports shared libraries...
yes
checking command to parse /usr/bin/nm -B output... ok
checking how to hardcode library paths into programs... immediate
checking for /usr/bin/ld option to reload object files... -r
checking dynamic linker characteristics... freebsd5.2 ld.so
checking if libtool supports shared libraries... yes
*** Warning: the command libtool uses to detect shared libraries,
*** /usr/bin/file, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** address@hidden
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
loading cache ./config.cache
checking for Cygwin environment... no
checking for mingw32 environment... no
checking for executable suffix... no
checking for object suffix... o
checking for ANSI C header files... yes
checking for string.h... yes
checking for strings.h... yes
checking for memory.h... yes
checking for stdlib.h... yes
checking for stdarg.h... yes
checking for varargs.h... no
checking for tgmath.h... no
checking for math.h... yes
checking for ieeefp.h... yes
checking for pthread.h... yes
checking for unistd.h... yes
checking for sys/types.h... yes
checking for sys/mman.h... yes
checking for fcntl.h... yes
checking for dlfcn.h... yes
checking for sys/cygwin.h... no
checking for sys/stat.h... yes
checking for working const... yes
checking if char is unsigned... no
checking size of char... 1
checking size of short... 2
checking size of int... 4
checking size of long... 8
checking size of long long... 8
checking size of __int64... 0
checking size of float... 4
checking size of double... 8
checking size of long double... 16
checking size of void *... 8
checking for the 8-bit integer types... char, unsigned char
checking for the 16-bit integer types... short, unsigned short
checking for the 32-bit integer types... int, unsigned int
checking for the 64-bit integer types... long, unsigned long
checking for the native integer types... long, unsigned long
checking for the 32-bit floating-point type... float
checking for the 64-bit floating-point type... double
checking for the native floating-point type... long double
checking for C++ exception handling option... none needed
checking for C++ throw() idiom... yes
checking for -fno-gcse option... yes
checking for -lstdc++ option... yes
checking for sin in -lm... yes
checking for dlopen in -ldl... no
checking for pthread_create in -lpthread... yes
checking for 8-bit clean memcmp... yes
checking for memset... yes
checking for memcmp... yes
checking for memchr... yes
checking for memcpy... yes
checking for memmove... yes
checking for bcopy... yes
checking for bzero... yes
checking for bcmp... yes
checking for strlen... yes
checking for strcpy... yes
checking for strcat... yes
checking for strncpy... yes
checking for strcmp... yes
checking for strncmp... yes
checking for strchr... yes
checking for strrchr... yes
checking for vsprintf... yes
checking for vsnprintf... yes
checking for _vsnprintf... no
checking for getpagesize... yes
checking for isnan... yes
checking for isinf... yes
checking for finite... yes
checking for fmod... yes
checking for remainder... yes
checking for drem... yes
checking for ceil... yes
checking for floor... yes
checking for acos... yes
checking for asin... yes
checking for atan... yes
checking for atan2... yes
checking for cos... yes
checking for cosh... yes
checking for exp... yes
checking for log... yes
checking for log10... yes
checking for pow... yes
checking for sin... yes
checking for sinh... yes
checking for sqrt... yes
checking for tan... yes
checking for tanh... yes
checking for isnanf... yes
checking for isinff... no
checking for finitef... yes
checking for fmodf... yes
checking for remainderf... yes
checking for dremf... yes
checking for ceilf... yes
checking for floorf... yes
checking for acosf... yes
checking for asinf... yes
checking for atanf... yes
checking for atan2f... yes
checking for cosf... yes
checking for coshf... yes
checking for expf... yes
checking for logf... yes
checking for log10f... yes
checking for powf... yes
checking for sinf... yes
checking for sinhf... yes
checking for sqrtf... yes
checking for tanf... yes
checking for tanhf... yes
checking for isnanl... no
checking for isinfl... no
checking for finitel... no
checking for fmodl... no
checking for remainderl... no
checking for dreml... no
checking for ceill... no
checking for floorl... no
checking for acosl... no
checking for asinl... no
checking for atanl... no
checking for atan2l... no
checking for cosl... no
checking for coshl... no
checking for expl... no
checking for logl... no
checking for log10l... no
checking for powl... no
checking for sinl... no
checking for sinhl... no
checking for sqrtl... no
checking for tanl... no
checking for tanhl... no
checking for dlopen... yes
checking for cygwin_conv_to_win32_path... no
checking for mmap... yes
checking for munmap... yes
checking for mprotect... yes
checking for working alloca.h... no
checking for alloca... yes
updating cache ./config.cache
creating ./config.status
creating Makefile
creating include/Makefile
creating include/jit/Makefile
creating include/jit/jit-defs.h
creating tools/Makefile
creating jit/Makefile
creating jitdynamic/Makefile
creating jitplus/Makefile
creating dpas/Makefile
creating tutorial/Makefile
creating tests/Makefile
creating doc/Makefile
creating config.h
===> Building for libjit-0.0.2
gmake all-recursive
gmake[1]: Entering directory
`/tmp/a/ports/lang/libjit/work/libjit-0.0.2'
Making all in include
gmake[2]: Entering directory
`/tmp/a/ports/lang/libjit/work/libjit-0.0.2/include'
Making all in jit
gmake[3]: Entering directory
`/tmp/a/ports/lang/libjit/work/libjit-0.0.2/include/jit'
gmake[3]: Nothing to be done for `all'.
gmake[3]: Leaving directory
`/tmp/a/ports/lang/libjit/work/libjit-0.0.2/include/jit'
gmake[3]: Entering directory
`/tmp/a/ports/lang/libjit/work/libjit-0.0.2/include'
gmake[3]: Nothing to be done for `all-am'.
gmake[3]: Leaving directory
`/tmp/a/ports/lang/libjit/work/libjit-0.0.2/include'
gmake[2]: Leaving directory
`/tmp/a/ports/lang/libjit/work/libjit-0.0.2/include'
Making all in tools
gmake[2]: Entering directory
`/tmp/a/ports/lang/libjit/work/libjit-0.0.2/tools'
cc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include
-I../jit -I../jit -O -pipe -Wall -c gen-apply.c
/bin/sh ../libtool --mode=link cc -I../include -I../include
-I../jit -I../jit -O -pipe -Wall -o gen-apply gen-apply.o
-lpthread -lm
mkdir .libs
cc -I../include -I../include -I../jit -I../jit -O -pipe -Wall -o
gen-apply gen-apply.o -lpthread -lm
./gen-apply >../jit/jit-apply-rules.h
gmake[2]: Leaving directory
`/tmp/a/ports/lang/libjit/work/libjit-0.0.2/tools'
Making all in jit
gmake[2]: Entering directory
`/tmp/a/ports/lang/libjit/work/libjit-0.0.2/jit'
/bin/sh ../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I..
-I../include -I../include -I. -I. -O -pipe -Wall -c jit-alloc.c
mkdir .libs
cc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I. -I. -O
-pipe -Wall -Wp,-MD,.deps/jit-alloc.pp -c jit-alloc.c -fPIC -DPIC -o
.libs/jit-alloc.lo
cc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I. -I. -O
-pipe -Wall -Wp,-MD,.deps/jit-alloc.pp -c jit-alloc.c -o jit-alloc.o
>/dev/null 2>&1
mv -f .libs/jit-alloc.lo jit-alloc.lo
/bin/sh ../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I..
-I../include -I../include -I. -I. -O -pipe -Wall -c jit-apply.c
rm -f .libs/jit-apply.lo
cc -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I. -I. -O
-pipe -Wall -Wp,-MD,.deps/jit-apply.pp -c jit-apply.c -fPIC -DPIC -o
.libs/jit-apply.lo
jit-apply.c: In function `jit_apply_builder_add_arguments':
jit-apply.c:262: error: stray '\' in program
jit-apply.c:262: warning: implicit declaration of function `n'
jit-apply.c:262: error: invalid type argument of `->'
jit-apply.c:262: error: stray '\' in program
jit-apply.c:262: error: syntax error before '}' token
jit-apply.c:262: error: stray '\' in program
jit-apply.c:262: error: `n' undeclared (first use in this function)
jit-apply.c:262: error: (Each undeclared identifier is reported only
once
jit-apply.c:262: error: for each function it appears in.)
jit-apply.c:262: error: syntax error before '<' token
jit-apply.c:262: error: `__split' undeclared (first use in this
function)
jit-apply.c:262: error: syntax error before "else"
jit-apply.c:262: error: `__size' undeclared (first use in this
function)
jit-apply.c:262: error: `__num_words' undeclared (first use in this
function)
jit-apply.c: At top level:
jit-apply.c:266: error: syntax error before "break"
jit-apply.c:75: warning: `jit_type_get_max_arg_size' defined but not
used
jit-apply.c:157: warning: `jit_apply_builder_add_arguments' defined
but not used
gmake[2]: *** [jit-apply.lo] Error 1
gmake[2]: Leaving directory
`/tmp/a/ports/lang/libjit/work/libjit-0.0.2/jit'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory
`/tmp/a/ports/lang/libjit/work/libjit-0.0.2'
gmake: *** [all-recursive-am] Error 2
*** Error code 2
Stop in /a/ports/lang/libjit.
================================================================
build ended at Fri May 21 19:40:50 GMT 2004
----- End forwarded message -----