[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Dvdrtools-users] Sony DRU-500A DVD-RW - command sequence error
From: |
j . sairanen |
Subject: |
RE: [Dvdrtools-users] Sony DRU-500A DVD-RW - command sequence error |
Date: |
Thu, 24 Oct 2002 14:19:51 +0000 |
Sorry, I was a little vague on the DVD+RW issue: my DVD
player plays mp3s from CD with an ISO9660 fs. I've
already tried with my friend's DVD+RW video which played
ok on his player but was not recognised by mine so I the
failure with my DVD+RW mp3 collection disk was to be
expected. The disk mounts fine on Linux.
br,
Jussi-Pekka
> Hi,
>
> I might be telling you something you already know, if so don't be offended ;-)
>
> When you say you had a "successful" burn, but the DVD Video player does not
> recognize it... there can be more than one way to fail in a DVD Video player,
> so
> I am curious as to how you determined it's the disk?
>
> It very well might be the drive cannot read DVD+RW (in fact it's most
> likely),
> but the other possibility is the "authoring" is somehow noncompliant.
>
> I say this because I once made a DVD-R that played on the computer DVD
> software,
> but not on the Video Player. It turned out I had illegal pointers in the IFO
> files, which the computer didn't care about but the standalone player did.
> There
> are, of course, other ways to confuse a DVD Video Player (lowercase files,
> etc).
> Video players don't seem to have "real" filesystem support, and make many
> assumptions about file structure.
>
> All reports seem to be that DVD+RW/+R is less compatible than DVD-R -- and
> I'm > convinced of this myself -- but before you conclude the format cannot
> be read,
> you might want to test some more.
>
> Two tests I can think of:
> 1) Do a 1:1 disk copy of something that plays on your DVD player.
>
> 2) Author again to DVD+R. On EITHER side of the DVD "format war", the
> write-once
> media have higher compatibility.
>
> Hope this helps,
>
> Scott
>
>
>
> > -----Original Message-----
> > From: Jussi-Pekka Sairanen [mailto:address@hidden
> > Sent: Wednesday, October 23, 2002 11:02 PM
> > To: address@hidden
> > Subject: [Dvdrtools-users] Sony DRU-500A DVD-RW - command
> > sequence error
> >
> >
> >
> > Hi,
> >
> > So I rushed to Fry's to get me a Sony DRU-500A. With dvd+rw-tools I
> > managed to burn a DVD+RW succesfully. However, my DVD player doesn't
> > recognise DVD+RW so my preferred format would probably be DVD-RW.
> >
> > Burning DVD-RW failed. Befor any bits get written I get an
> > error message:
> >
> >
> > Sense Key: 0x5 Illegal Request, Segment 0
> > Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
> > Sense flags: Blk 0 (not valid)
> >
> >
> > Is there something I've overlooked? The disk is not formatted, I read
> > someplace that it is not needed with DVD-RW. How would you do
> > it anyway?
> >
> >
> >
> > Here's the whole output.
> >
> >
> > linux /home/jps# dvdrecord -packet -v speed=2 dev=0,0,0
> > video/jp/mp3.iso
> > dvdrtools - based on:
> > Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001
> > Jörg Schilling
> > TOC Type: 1 = CD-ROM
> > scsidev: '0,0,0'
> > scsibus: 0 target: 0 lun: 0
> > Linux sg driver version: 3.1.24
> > Using libscg version 'schily-0.5'
> > atapi: 1
> > Device type : Removable CD-ROM
> > Version : 0
> > Response Format: 2
> > Capabilities :
> > Vendor_info : 'SONY '
> > Identifikation : 'DVD RW DRU-500A '
> > Revision : '1.0c'
> > Device seems to be: Generic mmc2 DVD.
> > Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
> > Driver flags : SWABAUDIO BURNFREE
> > Supported modes: PACKET SAO
> > Drive buf size : 4718592 = 4608 KB
> > linux /home/jps# dvdrecord -dao -v speed=2 dev=0,0,0 /video/jp/mp3.iso
> > dvdrtools - based on:
> > Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001
> > Jörg Schilling
> > TOC Type: 1 = CD-ROM
> > scsidev: '0,0,0'
> > scsibus: 0 target: 0 lun: 0
> > Linux sg driver version: 3.1.24
> > Using libscg version 'schily-0.5'
> > atapi: 1
> > Device type : Removable CD-ROM
> > Version : 0
> > Response Format: 2
> > Capabilities :
> > Vendor_info : 'SONY '
> > Identifikation : 'DVD RW DRU-500A '
> > Revision : '1.0c'
> > Device seems to be: Generic mmc2 DVD.
> > Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
> > Driver flags : SWABAUDIO BURNFREE
> > Supported modes: PACKET SAO
> > Drive buf size : 4718592 = 4608 KB
> > FIFO size : 4194304 = 4096 KB
> > Track 01: data 834 MB
> > Total size: 958 MB (95:00.05) = 427504 sectors
> > Lout start: 959 MB (95:02/04) = 427504 sectors
> > Current Secsize: 2048
> > ATIP start of lead in: -150 (00:00/00)
> > Disk type: unknown
> > Manuf. index: -1
> > Manufacturer: unknown (not in table)
> > Blocks total: 2298496 Blocks current: 2298496 Blocks
> > remaining: 1870992
> > Starting to write CD/DVD at speed 1 in write mode for single session.
> > Last chance to quit, starting real write in 0 seconds.
> > Operation starts.
> > Waiting for reader process to fill input buffer ... input
> > buffer ready.
> > trackno=0
> > BURN-Free is ON.
> > Performing OPC...
> > Sending CUE sheet...
> > Starting new track at sector: 427670
> > Track 01: 0 of 834 MB written.dvdrecord: Input/output
> > error. write_g1:
> > scsi sendcmd: no error
> > CDB: 2A 00 00 06 86 96 00 00 1F 00
> > status: 0x2 (CHECK CONDITION)
> > Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 2C 00 00 00
> > Sense Key: 0x5 Illegal Request, Segment 0
> > Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
> > Sense flags: Blk 0 (not valid)
> > cmd finished after 0.005s timeout 200s
> >
> > write track data: error after 0 bytes
> > Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
> > Writing time: 11.121s
> > Fixating...
> > Fixating time: 0.001s
> > dvdrecord: fifo had 64 puts and 1 gets.
> > dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
> >
> >
> >
> > _______________________________________________
> > Dvdrtools-users mailing list
> > address@hidden
> > http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
> >