[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Dvdrtools-users] Problem burning to LG DVDRAM GSA-4167B
From: |
Samson Lee |
Subject: |
Re: [Dvdrtools-users] Problem burning to LG DVDRAM GSA-4167B |
Date: |
Fri, 30 Dec 2005 11:42:57 +1100 |
User-agent: |
Mozilla Thunderbird 1.0.7 (Windows/20050923) |
Bryan J. Smith wrote:
The drive is on secondary master. The hard drive with the
.iso is on secondary slave. All devices are running udma2.
Bam! That's your problem. You will run into a noticable
performance issue when you are doing DMA from one device to
another on the same channel. Especially from the
all-important latency aspect.
Okay, I moved the .iso file onto my other hard drive on hda (udma5).
Tried burning it and same problem :(
1. The software reports Drive buf size : 1114112 = 1088 KB,
but the drive actually has 2MB buffer
Actually, mine says 1,8xx-something.
About the drive buffer size problem, if I enter the command without a
disc in the drive, it says Drive buf size : 1966080 = 1920 KB !!!! The
disc is 8x DVD+R ...
(without blank disc in drive)
# cdrecord-wrapper.sh -v -sao dev=/dev/dvd dvd.iso
Cdrecord-ProDVD-Clone 2.01b31 (i686-pc-linux-gnu) Copyright (C)
1995-2004 Jörg Schilling
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for:
private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
scsidev: '/dev/dvd'
devname: '/dev/dvd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4167B'
Revision : 'DL10'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: none
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: Unknown
Profile: Unknown
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD+RW
Profile: DVD+R
Profile: Unknown
Profile: DVD-ROM
Profile: CD-R
Profile: CD-RW
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1966080 = 1920 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 3571 MB
Total size: 4102 MB (406:24.00) = 1828800 sectors
Lout start: 4102 MB (406:26/00) = 1828800 sectors
cdrecord-ProDVD: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 10 00 00 BB 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s
cdrecord-ProDVD: No disk / Wrong disk!
(with blank disc in drive)
# cdrecord-wrapper.sh -v -sao dev=/dev/dvd dvd.iso
Cdrecord-ProDVD-Clone 2.01b31 (i686-pc-linux-gnu) Copyright (C)
1995-2004 Jörg Schilling
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for:
private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
scsidev: '/dev/dvd'
devname: '/dev/dvd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4167B'
Revision : 'DL10'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD+R
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: Unknown
Profile: Unknown
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD+RW
Profile: DVD+R (current)
Profile: Unknown
Profile: DVD-ROM
Profile: CD-R
Profile: CD-RW
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 3571 MB
Total size: 3571 MB = 1828800 sectors
Current Secsize: 2048
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 466304
Starting to write CD/DVD at speed 8 in real SAO mode for single session.
Last chance to quit, starting real write 8 seconds.
# hdparm -i /dev/hdc
/dev/hdc:
Model=HL-DT-ST DVDRAM GSA-4167B, FwRev=DL10,
...
UDMA modes: udma0 udma1 *udma2
AdvancedPM=no
Drive conforms to: device does not report version:
* signifies the current active mode
And "hdparm -i /dev/hdd"?
# hdparm -i /dev/hda
/dev/hda:
Model=ST3200822A, FwRev=3.01, SerialNo=5LJ0XEA0
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: ATA/ATAPI-1
ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6
* signifies the current active mode
--
UTS CRICOS Provider Code: 00099F
DISCLAIMER: This email message and any accompanying attachments may contain
confidential information. If you are not the intended recipient, do not
read, use, disseminate, distribute or copy this message or attachments. If
you have received this message in error, please notify the sender
immediately and delete this message. Any views expressed in this message
are those of the individual sender, except where the sender expressly, and
with authority, states them to be the views the University of Technology,
Sydney. Before opening any attachments, please check them for viruses and
defects.
- [Dvdrtools-users] Problem burning to LG DVDRAM GSA-4167B, Samson Lee, 2005/12/29
- Re: [Dvdrtools-users] Problem burning to LG DVDRAM GSA-4167B, Bryan J. Smith, 2005/12/29
- Re: [Dvdrtools-users] Problem burning to LG DVDRAM GSA-4167B, Samson Lee, 2005/12/29
- Re: [Dvdrtools-users] Problem burning to LG DVDRAM GSA-4167B, Bryan J. Smith, 2005/12/29
- Re: [Dvdrtools-users] Problem burning to LG DVDRAM GSA-4167B, Samson Lee, 2005/12/29
- Re: [Dvdrtools-users] Problem burning to LG DVDRAM GSA-4167B, Bryan J. Smith, 2005/12/29
- Re: [Dvdrtools-users] Problem burning to LG DVDRAM GSA-4167B,
Samson Lee <=
- [Dvdrtools-users] Re: Problem burning to LG DVDRAM GSA-4167B -- DVD+R != DVD-R, Bryan J. Smith, 2005/12/29
- [Dvdrtools-users] Re: Problem burning to LG DVDRAM GSA-4167B -- DVD+R != DVD-R, Samson Lee, 2005/12/29
- [Dvdrtools-users] Re: Problem burning to LG DVDRAM GSA-4167B -- DVD+R != DVD-R, Bryan J. Smith, 2005/12/30
- Re: [Dvdrtools-users] Re: Problem burning to LG DVDRAM GSA-4167B -- DVD+R != DVD-R, Volker Kuhlmann, 2005/12/30
- [Dvdrtools-users] Re: Problem burning to LG DVDRAM GSA-4167B -- ProDVD only does DVD-R, Bryan J. Smith, 2005/12/30
- Re: [Dvdrtools-users] Re: Problem burning to LG DVDRAM GSA-4167B -- ProDVD only does DVD-R, Volker Kuhlmann, 2005/12/30
- Re: [Dvdrtools-users] Re: Problem burning to LG DVDRAM GSA-4167B -- ProDVD only does DVD-R, Bryan J. Smith, 2005/12/30
- Re: [Dvdrtools-users] Re: Problem burning to LG DVDRAM GSA-4167B -- ProDVD only does DVD-R, Volker Kuhlmann, 2005/12/31
- Re: [Dvdrtools-users] Re: Problem burning to LG DVDRAM GSA-4167B -- ProDVD only does DVD-R, Bryan J. Smith, 2005/12/31
- Re: [Dvdrtools-users] Re: Problem burning to LG DVDRAM GSA-4167B -- ProDVD only does DVD-R, Volker Kuhlmann, 2005/12/31