[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file
From: |
Eric Schulte |
Subject: |
Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file |
Date: |
Fri, 16 Jul 2010 15:58:53 -0700 |
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/23.2 (gnu/linux) |
Hi Rainer,
I've just pushed up a fix for the org-babel-post-tangle-hook.
With a minimal org-babel configuration, if I open the following file.
--8<---------------cut here---------------start------------->8---
** tangle R and load
:PROPERTIES:
:tangle: to-load.r
:END:
evaluate this
#+begin_src emacs-lisp :results silent :tangle no
(add-hook 'org-babel-post-tangle-hook
(lambda () (message "I'm in %s" (buffer-file-name))))
#+end_src
then tangle
#+begin_src R :comments yes
x <- 8
#+end_src
#+begin_src R
y <- 9
#+end_src
--8<---------------cut here---------------end--------------->8---
evaluate the emacs-lisp code block to initialize my post-tangle-hook,
and then tangle the very same file, I see the following in my messages
buffer, indicating that the correct file is now being visited.
--8<---------------cut here---------------start------------->8---
Wrote /home/eschulte/Desktop/to-load.r [2 times]
tangled 2 code blocks
I'm in /home/eschulte/Desktop/to-load.r
--8<---------------cut here---------------end--------------->8---
Hopefully this will now work for you as well.
Thanks -- Eric
Rainer M Krug <address@hidden> writes:
> On 13/07/2010 10:14, Dr Rainer M Krug wrote:
>> On 12/07/2010 19:51, Eric Schulte wrote:
>>> Rainer M Krug <address@hidden> writes:
>>
>>>> Hi Eric,
>>>>
>>>> On Fri, Jul 9, 2010 at 5:44 PM, Eric Schulte <address@hidden> wrote:
>>>>
>>>>> Hi Rainer,
>>>>>
>>>>> Rainer M Krug <address@hidden> writes:
>>>>>
>>>>>> On Thu, Jul 8, 2010 at 9:03 PM, Eric Schulte <address@hidden>
>>>>> wrote:
>>>>> [...]
>>>>>>>
>>>>>>> (add-hook 'org-babel-post-tangle-hook
>>>>>>> (lambda () (ess-load-file (buffer-file-name))))
>>>>>>>
>>>>>>
>>>>>> Unfortunately, this does not work. I put the code above into my
>>>>>> emacs.organd nothing happens - not even an error message. I tried to
>>>>>> use the C-h v to customise the variable, but I don't manage it.
>>>>>
>>>>> If the variable isn't registered with C-h v, then it sounds like maybe
>>>>> you need to update Org-mode, and/or re-run make clean && make.
>>>>>
>>>>
>>>> OK - that is working now.
>>>>
>>>>
>>>>>
>>>>>> In addition, The filename for es-load-file shoud not be the buffer
>>>>>> name, but the buffer name with the extension replaced with R.
>>>>>>
>>>>>
>>>>> `buffer-file-name', returns the name of the file that the buffer is
>>>>> visiting, so wouldn't this already be the case if the filename ends with
>>>>> .R?
>>>>>
>>>>
>>>> Isn't the buffer from which I am tangling the org buffer, and not the
>>>> result
>>>> from the tangling? (see below for further remarks.
>>>>
>>
>>> No this hook is run from /within/ a buffer visiting the file of tangled
>>> code, so in the example hook function above (buffer-file-name) will
>>> equal the name of the file of tangled R code. From your later message
>>> it looks like the issues below have been resolved.
>>
>> Thanks a lot for a very useful addition, and I will see abut the
>> buffer-name and come back if it is still the org-file buffer for me,
>
> I finally tried it out, and it is still the same: when I tangle an org
> file, for the hook as defined above, buffer-file-name is the org file.
>
> Cheers,
>
> Raienr
>
>>
>> Rainer
>>
>>
>>> Best -- Eric
>>
>>>>
>>>>
>>>>>
>>>>> This minimal example with the hook defined as above works for me. After
>>>>> tangling I can jump to the *R* buffer where both x and y are defined.
>>>>>
>>>>> --8<---------------cut here---------------start------------->8---
>>>>> ** tangle R and load
>>>>> :PROPERTIES:
>>>>> :tangle: to-load.r
>>>>> :END:
>>>>>
>>>>> #+begin_src R :comments yes
>>>>> x <- 8
>>>>> #+end_src
>>>>>
>>>>> #+begin_src R
>>>>> y <- 9
>>>>> #+end_src
>>>>> --8<---------------cut here---------------end--------------->8---
>>>>>
>>>>
>>>> Not here -
>>>>
>>>> Emacs and org-mode version:
>>>>
>>>> GNU Emacs 23.2.1 (i686-pc-linux-gnu, GTK+ Version 2.20.1)
>>>> Org-mode version 6.36trans (release_6.36.603.g227b)
>>>>
>>>> 1) if no R process is running, I get the following message:
>>>> ess-start-process-specific: No ESS processes running; not yet implemented
>>>> to
>>>> start (Initial,nil)
>>>> No problem 0 I can start an R process manually.
>>>>
>>>> 2) when an R session is running, I get the following error message from
>>>> ESS:
>>>> Errors: Use C-c ` to find error.
>>>> Symbol's function definition is void: with-temp-filebuffer
>>>>
>>>> and from ESS:
>>>>
>>>> Error in source("/home/rkrug/tmp/R.org") :
>>>> /home/rkrug/tmp/R.org:1:1: unexpected '^'
>>>> 1: **
>>>>
>>>> it seems to submit the org file (the buffer is saved as R.org) to R.
>>>>
>>>> So buffer-file-name should actually be replaced with the name from the file
>>>> name resulting from the tangling, in the easiest case (which would be fine
>>>> with me) the org buffer name with .org replaced with .R.
>>>> So I did the following (my firs elisp code!):
>>>>
>>>> (add-hook 'org-babel-post-tangle-hook
>>>> (lambda () (ess-load-file (replace-regexp-in-string ".org" ".R"
>>>> buffer-file-name))))
>>>>
>>>> and it is working - except that I still get the Symbol's function
>>>> definition
>>>> is void: with-temp-filebuffer , but it does not seem to do anything.
>>>>
>>>> Thanks a lot,
>>>>
>>>> Rainer
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>>
>>>>>> I am sorry about all these questions, but emacs-lisp I have never used
>>>>>> emacs-lisp (I should - and I will!)
>>>>>>
>>>>>
>>>>> No problem at all, but be careful about learning too much lisp as you
>>>>> may begin to grow dissatisfied with R :)
>>>>>
>>>>> Best -- Eric
>>>>>
>>>>>>
>>>>>> Cheers and thanks for your patience,
>>>>>>
>>>>>> Rainer
>>>>>>
>>>>>>
>>>>>>> Best -- Eric
>>>>>>>
>>>>>>> Rainer M Krug <address@hidden> writes:
>>>>>>>
>>>>>>>> Hi
>>>>>>>>
>>>>>>>> I am using org-babel for literate programming in R and I am using the
>>>>>>>> following approach to test the code:
>>>>>>>>
>>>>>>>> 1) tangle
>>>>>>>> 2) refresh buffer containing the tangled code (I use auto-revert-mode
>>>>> or
>>>>>>>> global-auto-revert-mode for that)
>>>>>>>> 3) load the tangled file into an existing R session via ESS R for
>>>>>>> evaluation
>>>>>>>>
>>>>>>>> This involves switching between buffers in always the same sequence.
>>>>>>>> Therefore my suggestion:
>>>>>>>>
>>>>>>>> would it be possible to have a tangle-and-evaluate-tangled-file
>>>>>>> funcction,
>>>>>>>> which is doing this automatically?
>>>>>>>>
>>>>>>>> C-c - 0 and org-babel-execute-buffer do not work in this case, as
>>>>>>> functions
>>>>>>>> are split over several code blocks in R.
>>>>>>>>
>>>>>>>> Cheers,
>>>>>>>>
>>>>>>>> Rainer
>>>>>>>
>>>>>
>>
- [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Rainer M Krug, 2010/07/06
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Eric Schulte, 2010/07/08
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Rainer M Krug, 2010/07/09
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Eric Schulte, 2010/07/09
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Rainer M Krug, 2010/07/12
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Eric Schulte, 2010/07/12
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Dr Rainer M Krug, 2010/07/13
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Rainer M Krug, 2010/07/15
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file,
Eric Schulte <=
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Rainer M Krug, 2010/07/19
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Rainer M Krug, 2010/07/20
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Eric Schulte, 2010/07/20
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Rainer M Krug, 2010/07/21
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Rainer M Krug, 2010/07/21
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Rainer M Krug, 2010/07/21
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Eric Schulte, 2010/07/21
- Re: [Orgmode] [babel] feature request - tangle-and-evaluate-tangled-file, Rainer M Krug, 2010/07/22