emacs-orgmode
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [O] [SYNC] How do you sync your org-mode files between ndevices (n >


From: Ramon Diaz-Uriarte
Subject: Re: [O] [SYNC] How do you sync your org-mode files between ndevices (n > 2))
Date: Thu, 05 Sep 2013 18:14:21 +0200
User-agent: mu4e 0.9.9.5; emacs 24.3.50.1

address@hidden writes:

> address@hidden writes:
>
>> On Thu, Sep 05, 2013 at 12:00:02PM +0200, Alan Schmitt wrote:
>>> Hi,
>>> 
>>> address@hidden writes:
>>> 
>>> > I think this would be a wonderful addition to Worg.  Probably the FAQ is
>>> > more appropriate (under "Tips and Tricks") since this is one of most
>>> > commonly asked questions on the list.  On the other hand, if you think
>>> > covering this topic requires more than just a few lines, a longer entry
>>> > or short article in the config section would be more appropriate.
>>> 
>>> I can't promise anything, but I can try to write something. What
>>> external merging tool should I use?
>>
>> I think the most appropriate tool would be org-merge-driver.  But I'm
>> not sure how reliable it is.  That said, what might be nicer is if you
>> treat the external tool bits generically.  Then people can choose their
>> own tools in the future; also that will probably be less work for you
>> since you don't have to figure out the details of the external merging
>> tool yourself.
>
> It makes sense.
>
>> What I'm after is having all the Unison config bits on Worg, then people
>> choose how they want to use it:
>> 1. plain sync,
>> 2. sync with merging (with their own choice of tools)
>>
>> I or someone else could then add the Dropbox like, and "version control
>> (Git) way" of syncing.  This would then be a fairly complete FAQ on
>> synchronisation questions.  Does that seem feasible to you?
>
> I've been playing with the merging using ediff, and it works. I'll
> explain it here, and depending on the feedback, I'll put it on worg.
>


I find it very clear and helpful.  Thanks a lot!


R.


> Alan
>
> * Synchronizing org files with Unison
>
> This describes how to synchronize org files using the 
> [[http://www.cis.upenn.edu/~bcpierce/unison/][Unison file synchronizer]],
> as well as how to configure it to use an external tool to merge conflicting
> edits.
>
> ** Prerequisites
>
> You should have Unison up and running. Binaries can be found 
> [[http://www.cis.upenn.edu/~bcpierce/unison/download.html][here]] and the
> documentation is 
> [[http://www.cis.upenn.edu/~bcpierce/unison/download/releases/stable/unison-manual.html][here]].
>
> ** Synchronization
>
> Unison is a file synchronizer, thus it may be used to synchronize org files. 
> To
> configure Unison, on uses a /profile/ which states where the things to
> synchronize are as well as some options. Assuming I want to synchronize the
> files in ~/Users/schmitta/dir1~ and ~/Users/schmitta/dir2~, the profile would
> look like this
>
> #+BEGIN_EXAMPLE
> root = /Users/schmitta/dir1
> root = /Users/schmitta/dir2
> #+END_EXAMPLE
>
> In most cases Unison will be used with a remote machine. The local machine is
> called the /client/ and the remote one the /server/. For such remote
> synchronization, the ~unison~ binary must be installed in the server as
> well. The simplest way to connect to the machine is using ssh. One should 
> check
> that unison can be found there by doing ~ssh address@hidden unison -version~. 
> If
> ~unison~ cannot be found in the path, one may set the ~servercmd~ option as
> indicated in the next example.
>
> (Please see the 
> [[http://www.cis.upenn.edu/~bcpierce/unison/download/releases/stable/unison-manual.html#roots][manual
>  section on roots]] for further details.)
>
> #+BEGIN_EXAMPLE
> root = /Users/schmitta/dir1
> root = ssh://address@hidden/relative/path/to/dir2
>
> servercmd = /usr/bin/unison
> #+END_EXAMPLE
>
> ** Merging
>
> As Unison works on the level of files, it will trigger a /conflict/ if both
> files have changed since the last synchronization. In that case one can only
> choose which file to keep, which is not satisfying. Unison offers the
> possibility to use external tools to merge the files. There is an 
> [[http://www.cis.upenn.edu/~bcpierce/unison/download/releases/stable/unison-manual.html#merge][extensive
> manual section]] regarding this, we'll just describe how to use emacs and 
> ediff to
> do it.
>
> For better merging, we will ask unison to keep the last synchronized version 
> of
> every org file on the client; this way we can use ediff with ancestor. These
> ~currentbackup~ files may live alongside the synchronized files (with names of
> the form ~.bak.version.name~, which is configurable) or in a central location.
>
> Here is the modified configuration file.
>
> #+BEGIN_EXAMPLE
> root = /Users/schmitta/dir1
> root = ssh://address@hidden/relative/path/to/dir2
>
> servercmd = /usr/bin/unison
>
> backupcurrent = Name *.org
> backuplocation = local
> maxbackups = 0
>
> merge = Name *.org -> emacsclient -c --eval '(ediff-merge-files-with-ancestor 
> "CURRENT1" "CURRENT2" "CURRENTARCH" nil "NEW")'
>
> #+END_EXAMPLE
>
> The ~backupcurrent~ option tells unison to keep a backup of the last
> synchronized version of ever file with an ~org~ extension. The location of the
> backup should be local (alongside the file). Finally, no other backup should 
> be
> created.
>
> Next follows the merge command. For every org file in conflict, use the 
> command
> that launches a new emacs frame calling the ediff with ancestor function. The
> ~CURRENT1~, ~CURRENT2~, and ~CURRENTARCH~ strings are  replaced with the file
> from the first root, the file from the second root, and the last synchronized
> version. The ~NEW~ file is where Unison expects the file to be saved (which 
> will
> be done by the ediff session).
>
> Thus, when an org file has been modified on both hosts, an ediff session will 
> be
> launched in a new frame. Closing the frame will make Unison commit the merge 
> (it
> waits until the command has finished).
>
> If one does not want to use backups, it's possible to use the simpler ediff
> (without ancestor) command as follows.
>
> #+BEGIN_EXAMPLE
> root = /Users/schmitta/dir1
> root = ssh://address@hidden/relative/path/to/dir2
>
> servercmd = /usr/bin/unison
>
> merge = Name *.org -> emacsclient -c --eval '(ediff-merge-files "CURRENT1" 
> "CURRENT2" nil "NEW")'
>
> #+END_EXAMPLE


-- 
Ramon Diaz-Uriarte
Department of Biochemistry, Lab B-25
Facultad de Medicina 
Universidad Autónoma de Madrid 
Arzobispo Morcillo, 4
28029 Madrid
Spain

Phone: +34-91-497-2412

Email: address@hidden
       address@hidden

http://ligarto.org/rdiaz





reply via email to

[Prev in Thread] Current Thread [Next in Thread]