[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Gcl-devel] configure and make failed on FreeBSD
From: |
Camm Maguire |
Subject: |
Re: [Gcl-devel] configure and make failed on FreeBSD |
Date: |
31 Oct 2002 23:20:38 -0500 |
Hi GOTO!
GOTO Kentaro <address@hidden> writes:
> Hi,
>
> With previous patches and some additional changes attached below,
> I got raw_gcl but saved_gcl was not created as follows:
>
> echo " (in-package \"USER\")(system:save-system \"saved_gcl\")" >>foo
> ./raw_gcl ./ -libdir /usr/home/gotoken/savannah/gcl/ < foo
> GCL (GNU Common Lisp) April 1994 32768 pages
> Building symbol table for ./raw_gcl ..
> loading ./../lsp/export.lsp
> Initializing defmacro.o
> Can't open file ~s
I think your SEEK_TO_END_OFILE macro is bad. Please try this one from
linux.h:
/* Seeking to the end of ELF data is a little messy... */
#include <link.h>
#define SEEK_TO_END_OFILE(fp)\
do { \
long offset = 0, endofelf; int j; \
ElfW(Ehdr) eheader; ElfW(Shdr) shdr; \
fseek(fp, 0, SEEK_SET); \
fread(&eheader, sizeof(eheader), 1, fp); \
/* in case the headers themselves come AFTER the actual sections */ \
endofelf=offset = eheader.e_shoff+ eheader.e_shentsize
*eheader.e_shnum;\
fseek(fp, eheader.e_shoff, SEEK_SET); \
if ( eheader.e_shentsize != sizeof(ElfW(Shdr)) ) \
{ FEerror("Bad ELF section header size",0); } \
for ( j = 0; j < eheader.e_shnum; j++ ) \
{ fread(&shdr,eheader.e_shentsize,1,fp); \
if ( (shdr.sh_offset > offset) && (shdr.sh_type != SHT_NOBITS) ) \
{ offset = shdr.sh_offset; endofelf = offset+shdr.sh_size; } \
} \
if ( fseek(fp, endofelf, SEEK_SET) ) \
FEerror("Bad ELF file",0); \
} while(0)
Also, if you could post your full configure and make output, that
would help.
> Index: h/ptable.h
> ===================================================================
> RCS file: /cvsroot/gcl/gcl/h/ptable.h,v
> retrieving revision 1.4
> diff -u -r1.4 ptable.h
> --- h/ptable.h 12 Jul 2002 22:00:48 -0000 1.4
> +++ h/ptable.h 30 Oct 2002 10:27:46 -0000
> @@ -50,6 +50,8 @@
> #ifdef SPECIAL_RSYM
> struct string_address_table c_table;
> #else
> +#include "bfd.h"
> +#include "bfdlink.h"
This should be unnecessary. The headers are included if found where
needed elswhere.
> static struct bfd_link_info link_info;
> #endif
> struct string_address_table combined_table;
> Index: unixport/rsym.c
> ===================================================================
> RCS file: /cvsroot/gcl/gcl/unixport/rsym.c,v
> retrieving revision 1.2
> diff -u -r1.2 rsym.c
> --- unixport/rsym.c 25 Jul 2002 21:49:47 -0000 1.2
> +++ unixport/rsym.c 30 Oct 2002 10:27:49 -0000
> @@ -59,9 +59,8 @@
> them out to a file together with their addresses */
> static char *outfile;
>
> -main(argc,argv)
> -int argc ;
> -char *argv[];
> +int
> +main(int argc, char **argv, char **env)
Your compiler should also never get here, as the SPECIAL_RSYM file
should be defined whenever using RSYM (i.e. no bfd). But its a good
cleanup anyway.
Take care,
> {
> if (argc!=3) {perror("bad arg count");
> fflush(stdout);
> @@ -80,7 +79,7 @@
> unsigned int i;
> FILE *fp;
> int string_size=0;
> - extern char *malloc();
> + extern void *malloc();
>
> fp = fopen(filename, RDONLY);
>
>
> #end of patch
>
>
> _______________________________________________
> Gcl-devel mailing list
> address@hidden
> http://mail.gnu.org/mailman/listinfo/gcl-devel
>
>
--
Camm Maguire address@hidden
==========================================================================
"The earth is but one country, and mankind its citizens." -- Baha'u'llah
- [Gcl-devel] Re: Welcome to the "Gcl-devel" mailing list, GOTO Kentaro, 2002/10/23
- [Gcl-devel] configure and make failed on FreeBSD, GOTO Kentaro, 2002/10/23
- Re: [Gcl-devel] configure and make failed on FreeBSD, Camm Maguire, 2002/10/23
- Re: [Gcl-devel] configure and make failed on FreeBSD, GOTO Kentaro, 2002/10/23
- Re: [Gcl-devel] configure and make failed on FreeBSD, Camm Maguire, 2002/10/25
- Re: [Gcl-devel] configure and make failed on FreeBSD, GOTO Kentaro, 2002/10/25
- Re: [Gcl-devel] configure and make failed on FreeBSD, Camm Maguire, 2002/10/26
- Re: [Gcl-devel] configure and make failed on FreeBSD, GOTO Kentaro, 2002/10/26
- Re: [Gcl-devel] configure and make failed on FreeBSD, GOTO Kentaro, 2002/10/29
- Re: [Gcl-devel] configure and make failed on FreeBSD, GOTO Kentaro, 2002/10/30
- Re: [Gcl-devel] configure and make failed on FreeBSD,
Camm Maguire <=
- Re: [Gcl-devel] configure and make failed on FreeBSD, Camm Maguire, 2002/10/31