Re: [Gluster-devel] Re: Timeout settings and self-healing ? (WAS: HA failover test unsuccessful (inaccessible mountpoint))

[Krishna Srinivas]

Guido,
Do you see the same behavior if you kill one of the server processes
instead of unplugging the cable?
Can you "cd" out of glusterfs mount point and "cd" back in after you
get the first "transport endpoint not connected" and see if you
still see the error?
Do you see "transport endpoint" error for all operations you do on
the mount point?
Thanks
Krishna


On Tue, Apr 22, 2008 at 1:19 PM, Guido Smit <address@hidden> wrote:
>
>  My server configs:
>
>  http://glusterfs.pastebin.com/m3f82f264
>
>  One of the client config:
>  http://glusterfs.pastebin.com/d5df7fab
>
>  My problem is, when one of the storage servers is unplugged, I always get
> the
>  Transport endpoint is not connected message.
>
>
>
>
>  Krishna Srinivas wrote:
>  Guido,
>
> Can you give the setup details, conf files?
> you can use http://glusterfs.pastebin.com for pasting conf files.
>
> Thanks
> Krishna
>
> On Fri, Apr 4, 2008 at 2:40 PM, Anand Avati <address@hidden> wrote:
>
>
>  Daniel/Guido,
>  can you paste the logs which are relevant from the time of unplugging the
>  cable till the end of experiment?
>
>  avati
>
>  2008/4/3, Daniel Maher <address@hidden <address@hidden>>:
>
>
>
>  > On Thu, 3 Apr 2008 14:55:48 +0530 "Anand Avati" <address@hidden>
>  > wrote:
>  >
>  > > Daniel,
>  > > maybe it is just taking long to detect connection failure. Can you
>  > > try with 'option transport-timeout 20' (sets response timeout to 20
>  > > seconds) in all your protocol/client and see if you still face the
>  > > 'hang' ?
>  >
>  > My simple test case is as follows :
>  > 1. Unplug one of the nodes (dfsD)
>  > 2. Attempt to ls -l the /opt/ (in which gfs-mount/ - the mountpoint -
>  > is contained)
>  >
>  > I set the timeout option along with every client instance in both the
>  > client and server configs. I tested timeout settings of 10 and 20
>  > seconds (just to see). In both cases, the 'hang' releases after a while
>  > (approx 30 seconds), but the results are odd. For example :
>  >
>  > # ls -l
>  > (hang ~ 30 seconds)
>  > ls: cannot access gfs-mount: Transport endpoint is not connected
>  > total 0
>  > d????????? ? ? ? ? ? gfs-mount
>  >
>  > # ls -l
>  > (immediate)
>  > ls: cannot access gfs-mount: Transport endpoint is not connected
>  > total 0
>  > d????????? ? ? ? ? ? gfs-mount
>  >
>  > (user wait ~ 5 seconds)
>  >
>  > # ls -l
>  > total 8
>  > drwxr-xr-x 2 root root 4096 2008-04-03 09:43 gfs-mount
>  >
>  > It would appear that the "recovery" time, regardless of whether the
>  > timeout is set to 10 or 20, is around 35 to 40 seconds - though, at the
>  > very least, it recovered. Is there any reasonable way to bring this
>  > period of time down ?
>  >
>  > Thank you all so much for your feedback on this topic !
>  >
>  >
>
>
> _______________________________________________
>  Gluster-devel mailing list
>  address@hidden
>  http://lists.nongnu.org/mailman/listinfo/gluster-devel
>
>
>
>
>
>
> --
> Met vriendelijke groet,
>
> Guido Smit
> ComLog B.V.
>
> Televisieweg 133
> 1322 BE Almere
> T. 036 5470500
> F. 036 5470481
>
> No virus found in this outgoing message.
>  Checked by AVG.
>  Version: 7.5.524 / Virus Database: 269.23.3/1390 - Release Date: 4/21/2008
> 4:23 PM
>
>