Sending ringtones to a 6310

[Niklas Koponen]

Hi!

I'm trying to send a ringtone to a 6310 using the DLR-3P cable. The
sending fails. I also notices that there are differences between the man
page and the --help output of the --sendringtone command. The rtttl file
and destination are in different order. I guess the --help output is
correct so that rtttl is followed by destination.

The output is as follows:

$ gnokii --sendringtone tyo.rtttl 0407571459

GNOKII Version 0.5.0rc3
Opened configuration file /home/nikke/.gnokiirc
Added new section global
Adding key/value port//dev/ttyS0
Adding key/value model/6310
Adding key/value initlength/default
Adding key/value connection/serial
Adding key/value bindir//opt/sbin/
Adding key/value use_locking/no
Adding key/value serial_baudrate/19200
Adding key/value smsc_timeout/0
Added new section connect_script
Adding key/value TELEPHONE/12345678
Added new section disconnect_script
Added new section bluetooth
Adding key/value rfcomm_cn/1
Adding key/value bt_address/aa:bb:cc:dd:ee:ff
phone instance config:
model: 6310
port_device: /dev/ttyS0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 0
connect_script: 
disconnect_script: 
Connecting
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
[Received Ack of type 1b, seq: 80]
[Sending Ack of type 1b, seq: 4]
Message received: 0x1b / 0x002e
01 2d 00 08 00 01 58 29 00 22 56 20 30 34 2e 32 |  -    X) "V 04.2
30 0a 30 34 2d 30 33 2d 30 32 0a 4e 50 45 2d 34 | 0 04-03-02 NPE-4
0a 28 63 29 20 4e 4d 50 2e 0a 41 00 00 00       |  (c) NMP. A     
Received message type 1b
model length: 5
Received model NPE-4
default_note_duration = 32
default_note_scale = 1
Sending SMS...(102)
Message sent: 0x02 / 0x0066
00 01 00 02 00 00 00 55 55 01 02 5c 51 00 00 f5 |        UU  \Q  õ
00 04 82 0c 01 07 0a 81 40 70 75 41 95 00 82 0c |         @puA    
02 02 01 00 00 00 00 00 00 00 80 38 30 30 06 05 |            800  
04 15 81 00 00 02 4a 3a 65 d1 e5 bd cd bd d5 b9 |       J:eÑå½Í½Õ¹
91 a4 04 00 22 d9 04 91 41 04 13 41 04 11 41 04 |  ¤  "Ù  A  A  A 
10 41 04 10 41 04 10 41 04 10 41 04 00 00 55 55 |  A  A  A  A   UU
55 55 08 04 01 a9                               | UU   ©          
[Received Ack of type 02, seq:  1]
SMS Send failed (Device not ready.)
Serial device: closing device


What is wrong? It says device not ready? Why? I can send sms-messages
OK.

Any help appreciated. Has anybody got this working (sending ringtones to
a 6310)?

-Niklas
-- 
Niklas Koponen   | Hietapellontie 3 B 7 | address@hidden
+358 40 757 1459 | 02400 KIRKKONUMMI    | http://www.iki.fi/niklas.koponen