[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: sending sms with sx1 failed
From: |
Bernd Borne |
Subject: |
Re: sending sms with sx1 failed |
Date: |
Sat, 1 Jan 2005 18:04:52 +0100 |
User-agent: |
KMail/1.7.1 |
Sorry for misleading you. The phone is connected over bluetooth channel 13
This are my settings
port = 00:01:E3:3B:85:8A
rfcomm_channel = 13
model = series60
On the phone runs gnapplet
Retrieving the phonebook and getting sms works fine.
Sending sms failed.
Thanks for your help,
Bernd
On Saturday 01 January 2005 17:44, Felix Hammer wrote:
> > Message sent: 0x00 / 0x0005
> > 41 54 45 31 0d | ATE1
> > write: [ATE1<cr>]
> > Message sent: 0x00 / 0x000a
> > 41 54 2b 43 4d 45 45 3d 31 0d | AT+CMEE=1
> > write: [AT+CMEE=1<cr>]
> > Message sent: 0x06 / 0x0008
> > 41 54 2b 43 47 4d 4d 0d | AT+CGMM
> > write: [AT+CGMM<cr>]
> > Initialization failed (11)
> > Telephone interface init failed: Command timed out.
> > Quitting.
>
> that means that connection to telephone is broken. try to do this with
> plugged cable but without handy. it should be the same.
> i've got the same behavior the last days. my cable was broken. it was a
> very cheap usb-cable i've bought at ebay. there was one pin insufficient.
> thats btw.
>
> good luck
> felix
>
>
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users