Nokia 3310 divert- Problems

[ullrich dittmer]

Hello

I would like to divert call from my nokia 3310. In
your FAQ I read that I must use:

 echo "*21*number#G" | gnokii --keysequence

But then I do it that way, I always get:

GNOKII Version 0.6.7
Failed to press key: Command timed out.

Debugging says:

milkyway:~# echo "*21*number#G" | gnokii --keysequence
GNOKII Version 0.6.7
LOG: debug mask is 0x1
phone instance config:
model: 3310
port_device: /dev/ttyS1
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
sm_retry: off
Serial device: opening device /dev/ttyS1
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
[Received Ack of type 40, seq:  0]
[Sending Ack of type 40, seq: 2]
Message received: 0x40 / 0x000c
01 01 64 03 01 4f 0d 01 01 01 1b 58             |   d 
O     X
Received message type 40
Message: Extended commands enabled.
Message sent: 0x40 / 0x0003
00 01 66                                        |   f
[Received Ack of type 40, seq:  1]
[Sending Ack of type 40, seq: 3]
Message received: 0x40 / 0x0014
01 01 66 01 33 35 30 31 30 31 39 31 31 37 35 35 |   f
350101911755
33 33 30 00                                     | 330
Received message type 40
IMEI: 350101911755330
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
[Received Ack of type 40, seq:  2]
[Sending Ack of type 40, seq: 4]
Message received: 0x40 / 0x000c
01 01 64 03 01 4f 0d 01 01 01 1b 58             |   d 
O     X
Received message type 40
Message: Extended commands enabled.
Message sent: 0x40 / 0x0004
00 01 c8 01                                     |
[Received Ack of type 40, seq:  3]
[Sending Ack of type 40, seq: 5]
Message received: 0x40 / 0x0025
01 01 c8 01 00 56 20 30 34 2e 31 38 0a 31 38 2d |     
V 04.18 18-
31 32 2d 30 30 0a 4e 48 4d 2d 35 0a 28 63 29 20 |
12-00 NHM-5 (c)
4e 4d 50 2e 00                                  | NMP.
Received message type 40
Received SW 04.18
Received model NHM-5
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
[Received Ack of type 40, seq:  4]
[Sending Ack of type 40, seq: 6]
Message received: 0x40 / 0x000c
01 01 64 03 01 4f 0d 01 01 01 1b 58             |   d 
O     X
Received message type 40
Message: Extended commands enabled.
Message sent: 0x40 / 0x0004
00 01 c8 05                                     |
[Received Ack of type 40, seq:  5]
[Sending Ack of type 40, seq: 7]
Message received: 0x40 / 0x000a
01 01 c8 05 00 30 36 31 35 00                   |     
0615
Received message type 40
Received SW 04.18, HW 0615
comparing "NHM-5" and ""
comparing "NHM-5" and "?????"
comparing "NHM-5" and "?????"
comparing "NHM-5" and "TFF-3"
comparing "NHM-5" and "RX-2"
comparing "NHM-5" and "TME-2"
comparing "NHM-5" and "TME-1"
comparing "NHM-5" and "TME-3"
comparing "NHM-5" and "THX-9L"
comparing "NHM-5" and "THF-9"
comparing "NHM-5" and "NHX-8"
comparing "NHM-5" and "THF-11"
comparing "NHM-5" and "THF-10"
comparing "NHM-5" and "THF-13"
comparing "NHM-5" and "THF-12"
comparing "NHM-5" and "TFE-4R"
comparing "NHM-5" and "NHE-2"
comparing "NHM-5" and "RH-18"
comparing "NHM-5" and "RH-38"
comparing "NHM-5" and "RH-36"
comparing "NHM-5" and "NKC-1"
comparing "NHM-5" and "NKW-1"
comparing "NHM-5" and "NKW-1C"
comparing "NHM-5" and "NHE-5"
comparing "NHM-5" and "NHE-5NX"
comparing "NHM-5" and "NHE-5"
comparing "NHM-5" and "NHE-5NA"
comparing "NHM-5" and "NHE-5NX"
comparing "NHM-5" and "NHE-5SA"
comparing "NHM-5" and "NHE-3"
comparing "NHM-5" and "NAM-2"
comparing "NHM-5" and "NHE-1"
comparing "NHM-5" and "NHE-4"
comparing "NHM-5" and "NHE-4"
comparing "NHM-5" and "NHK-1XA"
comparing "NHM-5" and "NHK-1"
comparing "NHM-5" and "NHK-4"
comparing "NHM-5" and "NHC-4NE/HE"
comparing "NHM-5" and "NHC-4NE/HE"
comparing "NHM-5" and "NHP-4"
comparing "NHM-5" and "NHD-4X"
comparing "NHM-5" and "NHB-3NB"
comparing "NHM-5" and "RH-40"
comparing "NHM-5" and "RH-42"
comparing "NHM-5" and "RH-39"
comparing "NHM-5" and "RH-41"
comparing "NHM-5" and "RH-3P"
comparing "NHM-5" and "RH-3DNG"
comparing "NHM-5" and "RH-17"
comparing "NHM-5" and "RH-3"
comparing "NHM-5" and "RM-4"
comparing "NHM-5" and "RM-5"
comparing "NHM-5" and "RH-19"
comparing "NHM-5" and "RH-50"
comparing "NHM-5" and "RH-48"
comparing "NHM-5" and "RH-6"
comparing "NHM-5" and "NHE-8"
comparing "NHM-5" and "0310"
comparing "NHM-5" and "RH-30"
comparing "NHM-5" and "RH-31"
comparing "NHM-5" and "NSE-8"
comparing "NHM-5" and "NSE-9"
comparing "NHM-5" and "NSD-1A"
comparing "NHM-5" and "NEM-1"
comparing "NHM-5" and "NEM-2"
Found model "NHM-5"
Message sent: 0x0c / 0x0007
00 01 00 42 01 0c 01                            |    B
[Received Ack of type 0c, seq:  6]
Message sent: 0x0c / 0x0007
00 01 00 42 01 0c 01                            |    B
SM_Block: exiting the retry loop
Message sent: 0x0c / 0x0007
00 01 00 42 01 0c 01                            |    B
SM_Block: exiting the retry loop
Failed to press key: Command timed out.
Message sent: 0x0c / 0x0007
00 01 00 42 01 02 01                            |    B


Other commands like 

gnokii --identify

work fine.

Have you any idea to solve that problem?

regards

Ullrich



        
                
___________________________________________________________ 
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: 
http://mail.yahoo.de