gnokii 0.6.26 on FreeBSD 7

[Mika Chu]

Dear all,

I am using gnokii 0.6.26 on FreeBSD 7 to send sms message, GSM modem is SIEMENS TC35i. Gnokii was installed by FreeBSD ports. After installation, I modified these lines in the gnokiirc file and copied to /root/.gnokiirc

port = /dev/cuad0
model = AT
serial_baudrate = 9600

after running gnokii --identify, it shows errors,

-----------------
GNOKII Version 0.6.26
LOG: debug mask is 0x1
Config read from file /root/.gnokiirc.
phone instance config:
model = AT
port = /dev/cuad0
connection = serial
initlength = default
serial_baudrate = 9600
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 1
sm_retry = 0
Initializing AT capable mobile phone ...
Serial device: opening device /dev/cuad0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ
write: [ATZ<cr>]
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1
write: [ATE1<cr>]
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1
write: [AT+CMEE=1<cr>]
Message sent: 0x06 / 0x0007
41 54 2b 47 4d 4d 0d                            | AT+GMM
write: [AT+GMM<cr>]
Initialization failed (11)
Serial device: closing device
Telephone interface init failed: Command timed out.
Quitting.
Cannot unlock device.
Command timed out.

I tried this GSM modem and same cable to another CentOS 5.2 server, everything like above is same, and modem can send SMS.

 

Could someone help me on FreeBSD?

 

Thanks in advanced.

Br,

Mika Chu