Re: Text vs PDU mode & the SMSC

[Richard Herselman]

Pawel Kot wrote:
> gnokii does not support text mode.
>   
Hmm. Not sure that I'm even on the right track, then.

AT+CSCS? queries for the available/supported modes, right? (that the 
modem supports, or that the network supports?)

Because we have gnokii 0.6.14-1 working fine on another server (with a 
serial modem and another network provider, though). Debug output from 
that server:

write: [AT+CSCS?<cr>]
read : [AT+CSCS?<cr><cr><lf>+CSCS: "GSM"<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x61 / 0x001f
02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 |  AT+CSCS?   +CSC
53 3a 20 22 47 53 4d 22 0d 0a 0d 0a 4f 4b 0d    | S: "GSM"    OK

[...snip...]

Received message type 21
Message sent okay
Send succeeded!
Serial device: closing device

So doesn't the "GSM" above indicate that the SMS is being sent using 
text mode?

Basically I'm trying to understand why gnokii on the working server ends 
up with +CSCS: "GSM", but gnokii on the non-working server insists on 
+CSCS: "IRA".