[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
CMS ERROR: 331 ?
From: |
Raphaël |
Subject: |
CMS ERROR: 331 ? |
Date: |
Wed, 19 Feb 2014 23:11:17 +0100 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
Seeing the previous thread, I just tried sending a hexa char using the -8
option of --sendsms.
Using a Sagem MyX-2, I used this :
$ echo $'\x10'|gnokii --sendsms -8 <number>
and got the following log :
> [...]
> PDU mode set
> Sending initial sequence
> Message sent: 0x67 / 0x000b
> 41 54 2b 43 4d 47 53 3d 31 35 0d | AT+CMGS=15
> write: [AT+CMGS=15<cr>]
> read : [AT+CMGS=15<cr><cr><lf>> ]
> Message received: 0x67 / 0x0010
> 01 41 54 2b 43 4d 47 53 3d 31 35 0d 0d 0a 3e 20 | AT+CMGS=15 >
> Received message type 67
> Got response: No error.
> Sending frame: 07913396050096F511000B913366463413F400F4AA0110
> Message sent: 0x21 / 0x002f
> 30 37 39 31 33 33 39 36 30 35 30 30 39 36 46 35 | 07913396050096F5
> 31 31 30 30 30 42 39 31 33 33 36 36 34 36 33 34 | 11000B9133664634
> 31 33 46 34 30 30 46 34 41 41 30 31 31 30 1a | 13F400F4AA0110
> write: [07913396050096F511000B913366463413F400F4AA0110^Z]
> read : [^AK913396050096F511000B913366463413F400F4AA0110^Z<cr><lf>+CMS ERROR:
> 331<cr><lf>]
> Message received: 0x21 / 0x0043
> 04 01 4b 39 31 33 33 39 36 30 35 30 30 39 36 46 | K913396050096F
> 35 31 31 30 30 30 42 39 31 33 33 36 36 34 36 33 | 511000B913366463
> 34 31 33 46 34 30 30 46 34 41 41 30 31 31 30 1a | 413F400F4AA0110
> 0d 0a 2b 43 4d 53 20 45 52 52 4f 52 3a 20 33 33 | +CMS ERROR: 33
> 31 0d 0a | 1
> Received message type 21
> SMS Send failed (No Carrier error during data call setup?)
> device: closing device
could it be a phone issue ?
or is a carrier issue ?
or is a gnokii issue ?
best regards
- CMS ERROR: 331 ?,
Raphaël <=