gnumed-bugs
[Top][All Lists]
Advanced
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Gnumed-bugs] Fwd: [Gnumed-devel] <bug>: Just trying to close.

From: James Busser
Subject: [Gnumed-bugs] Fwd: [Gnumed-devel] <bug>: Just trying to close.
Date: Fri, 03 Oct 2008 22:03:17 -0700 
Begin forwarded message:

From: address@hidden
Date: October 1, 2008 9:50:44 AM PDT (CA)
To: address@hidden
Subject: [Gnumed-devel] <bug>: Just trying to close.

Report sent via GNUmed's handler for unexpected exceptions:

 Just trying to close.
2008-09-30 16:37:32 ------------------------------------------------------------ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmLog.py:address@hidden): SECURITY: initial log level is [INFO] 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmLog.py:address@hidden): instantiated log file [/home/kyle/.gnumed/gnumed.log] with ID [/home/kyle/.gnumed/ gnumed.log] 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:<module>@24): $Revision: 1.43 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmLog.py:address@hidden): SECURITY: log level change from [INFO] to [DATA] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCLI.py:<module>@140): $Revision: 1.3 $ 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCLI.py:address@hidden): unparsed command line is >>/var/lib/python-support/python2.5/Gnumed/wxpython/gnumed.py<< 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCLI.py:address@hidden): command line arguments: {} 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:<module>@57): $Revision: 1.33 $ 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): unmodified startup locale settings (should be [C]) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): current locale settings: 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.get_locale(): (None, None) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.get_locale(LC_NUMERIC): (None, None) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.get_locale(LC_MESSAGES): (None, None) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.get_locale(LC_MONETARY): (None, None) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.get_locale(LC_COLLATE): (None, None) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.get_locale(LC_CTYPE): (None, None) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.get_locale(LC_TIME): (None, None) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): (locale.set_locale(LC_NUMERIC): C) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): (locale.set_locale(LC_MESSAGES): C) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): (locale.set_locale(LC_MONETARY): C) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): (locale.set_locale(LC_COLLATE): C) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): (locale.set_locale(LC_CTYPE): C) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): (locale.set_locale(LC_ALL): C) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): (locale.set_locale(LC_TIME): C) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.getdefaultlocale() - default (user) locale: ('en_US', 'UTF8') 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): encoding sanity check (also check "locale.nl_langinfo(CODESET)" below): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): sys.getdefaultencoding(): [ascii] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.getpreferredencoding(): [ANSI_X3.4-1968] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.getlocale()[1]: [None] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): sys.getfilesystemencoding(): [UTF-8] 2008-09-30 16:37:32 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): encoding suggested by locale (ANSI_X3.4-1968) does not match encoding currently set in locale (None) 2008-09-30 16:37:32 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): this might lead to encoding errors 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): <codecs> module CAN handle encoding [ANSI_X3.4-1968] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): <codecs> module CAN handle encoding [ascii] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): <codecs> module CAN handle encoding [UTF-8] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): on Linux you can determine a likely candidate for the encoding by running "locale charmap" 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale related environment variables (${LANG} is typically used): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): ${LANGUAGE} not set 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): ${LC_ALL} not set 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): ${LC_CTYPE} not set 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): ${LANG} =en_US.UTF-8 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): database of locale conventions: 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(mon_decimal_point): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(int_frac_digits): 127 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(p_sep_by_space): 127 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(frac_digits): 127 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(thousands_sep): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(n_sign_posn): 127 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(decimal_point): . 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(int_curr_symbol): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(n_cs_precedes): 127 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(p_sign_posn): 127 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(mon_thousands_sep): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(negative_sign): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(currency_symbol): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(n_sep_by_space): 127 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(mon_grouping): [] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(p_cs_precedes): 127 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(positive_sign): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(grouping): [] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(D_FMT): %m/%d/%y 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(D_T_FMT): %a %b %e %H:%M:%S %Y 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(YESEXPR): ^[yY] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(ALT_DIGITS): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(T_FMT_AMPM): %I:%M:%S %p 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(RADIXCHAR): . 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(ERA_D_FMT): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(T_FMT): %H:%M:%S 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(NOEXPR): ^[nN] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(CRNCYSTR): - 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(ERA): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(CODESET): ANSI_X3.4-1968 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(THOUSEP): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(ERA_D_T_FMT): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): activating user- default locale with <locale.setlocale(locale.LC_ALL, '')> returns: [en_US.UTF-8] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale settings after activating user-default locale 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): current locale settings: 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.get_locale(): ('en_US', 'UTF8') 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.get_locale(LC_NUMERIC): ('en_US', 'UTF8') 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.get_locale(LC_MESSAGES): ('en_US', 'UTF8') 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.get_locale(LC_MONETARY): ('en_US', 'UTF8') 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.get_locale(LC_COLLATE): ('en_US', 'UTF8') 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.get_locale(LC_CTYPE): ('en_US', 'UTF8') 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.get_locale(LC_TIME): ('en_US', 'UTF8') 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): (locale.set_locale(LC_NUMERIC): en_US.UTF-8) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): (locale.set_locale(LC_MESSAGES): en_US.UTF-8) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): (locale.set_locale(LC_MONETARY): en_US.UTF-8) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): (locale.set_locale(LC_COLLATE): en_US.UTF-8) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): (locale.set_locale(LC_CTYPE): en_US.UTF-8) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): (locale.set_locale(LC_ALL): en_US.UTF-8) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): (locale.set_locale(LC_TIME): en_US.UTF-8) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.getdefaultlocale() - default (user) locale: ('en_US', 'UTF8') 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): encoding sanity check (also check "locale.nl_langinfo(CODESET)" below): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): sys.getdefaultencoding(): [ascii] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.getpreferredencoding(): [UTF-8] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.getlocale()[1]: [UTF8] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): sys.getfilesystemencoding(): [UTF-8] 2008-09-30 16:37:32 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): encoding suggested by locale (UTF-8) does not match encoding currently set in locale (UTF8) 2008-09-30 16:37:32 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): this might lead to encoding errors 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): <codecs> module CAN handle encoding [UTF-8] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): <codecs> module CAN handle encoding [UTF8] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): <codecs> module CAN handle encoding [ascii] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): <codecs> module CAN handle encoding [UTF-8] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): on Linux you can determine a likely candidate for the encoding by running "locale charmap" 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale related environment variables (${LANG} is typically used): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): ${LANGUAGE} not set 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): ${LC_ALL} not set 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): ${LC_CTYPE} not set 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): ${LANG} =en_US.UTF-8 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): database of locale conventions: 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(mon_decimal_point): . 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(int_frac_digits): 2 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(p_sep_by_space): 0 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(frac_digits): 2 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(thousands_sep): , 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(n_sign_posn): 1 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(decimal_point): . 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(int_curr_symbol): USD 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(n_cs_precedes): 1 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(p_sign_posn): 1 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(mon_thousands_sep): , 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(negative_sign): - 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(currency_symbol): $ 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(n_sep_by_space): 0 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(mon_grouping): [3, 3, 0] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(p_cs_precedes): 1 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(positive_sign): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.localeconv(grouping): [3, 3, 0] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(D_FMT): %m/%d/%Y 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(D_T_FMT): %a %d %b %Y %r %Z 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(YESEXPR): ^[yY].* 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(ALT_DIGITS): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(T_FMT_AMPM): %I:%M:%S %p 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(RADIXCHAR): . 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(ERA_D_FMT): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(T_FMT): %r 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(NOEXPR): ^[nN].* 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(CRNCYSTR): -$ 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(ERA): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(CODESET): UTF-8 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(THOUSEP): , 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): locale.nl_langinfo(ERA_D_T_FMT): 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): splitting canonical locale [en_US] into levels 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): system locale levels: {'country': 'en_US', 'full': 'en_US', 'language': 'en'} 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): text domain is [gnumed] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): searching message catalog file for system locale [en_US] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): ${LANGUAGE} = [None] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): ${LC_ALL} = [None] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): ${LC_MESSAGES} = [None] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): ${LANG} = [en_US.UTF-8] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): system is POSIX, looking in standard locations (see Python Manual) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): looking at ${GNUMED_DIR} 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): ${GNUMED_DIR} not set 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): looking above binary install directory [/var/lib/python-support/python2.5/Gnumed/locale] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): looking in binary install directory [/var/lib/python-support/python2.5/Gnumed/wxpython/ locale] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): trying [/usr/share/ locale](/en_US/LC_MESSAGES/gnumed.mo) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): does not translate: [translate this or i18n will not work properly !] => [translate this or i18n will not work properly !] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): trying [/var/lib/ python-support/python2.5/Gnumed/locale](/en_US/LC_MESSAGES/gnumed.mo) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): trying [/var/lib/ python-support/python2.5/Gnumed/wxpython/locale](/en_US/LC_MESSAGES/ gnumed.mo) 2008-09-30 16:37:32 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmI18N.py:address@hidden): Giving up and falling back to NullTranslations() class in despair. 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gnumed.py:<module>@268): Starting up as main module ($Revision: 1.123.2.1 $). 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gnumed.py:<module>@269): command line is: {} 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gnumed.py:<module>@270): Python 2.5.2 (r252:60911, Jul 31 2008, 17:28:52) 
[GCC 4.2.3 (Ubuntu 4.2.3-2ubuntu7)] on linux2 (posix)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): wxPython not available 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): local application base dir: /var/lib/python-support/python2.5/Gnumed 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): current working dir: / home/kyle 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): user home dir: /home/kyle 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): user-specific config dir: /home/kyle/.gnumed 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): system-wide config dir: /etc/gnumed 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): system-wide application data dir: /usr/share/gnumed 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:<module>@59): $Revision: 1.14 $ 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:address@hidden): mx.DateTime.now(): [2008-09-30 16:37:32.29] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:address@hidden): datetime.now() : [2008-09-30 16:37:32.298003] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:address@hidden): time.localtime() : [(2008, 9, 30, 16, 37, 32, 1, 274, 1)] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:address@hidden): time.gmtime() : [(2008, 9, 30, 23, 37, 32, 1, 274, 0)] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:address@hidden): $TZ not defined 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:address@hidden): time.daylight: [1] (whether or not DST is locally used at all) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:address@hidden): time.timezone: [28800] seconds 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:address@hidden): time.altzone : [25200] seconds 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:address@hidden): time.tzname : [PST / PDT] (non-DST / DST) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:address@hidden): mx.DateTime.now().gmtoffset (): [-07:00:00.00] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:address@hidden): DST currently in effect: [True] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:address@hidden): DST currently in effect, using UTC offset of [-25200] seconds instead of [-28800] seconds 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:address@hidden): UTC offset is negative, assuming WEST of Greenwich ("clock is behind") 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmDateTime.py:address@hidden): ISO timezone: [-07:00:00.00] (taken from mx.DateTime.now().gmtoffset()) 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmPG2.py:<module>@30): $Revision: 1.63.2.1 $ 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmPG2.py:<module>@41): psycopg2 version: 2.0.6 (dec mx dt ext pq3) 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmPG2.py:<module>@42): PostgreSQL via DB-API module "<module 'psycopg2' from '/usr/lib/python2.5/site-packages/psycopg2/ __init__.pyc'>": API level 2.0, thread safety 2, parameter style "pyformat" 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmPG2.py:<module>@69): assuming default client encoding of [UTF8] 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmPG2.py:<module>@75): assuming default client time zone of [-07:00:00.00] 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:<module>@77): $Revision: 1.54.8.1 $ 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=None>) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): No config file given on command line. Format: --conf-file=<config file> 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): $GNUMED_DIR not set 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: ['/home/kyle/.gnumed/gnumed.conf', '/home/kyle/.gnumed.conf', '/etc/gnumed/gnumed.conf', '/etc/gnumed.conf', '/var/lib/python- support/python2.5/Gnumed/wxpython/gnumed.conf', '/var/lib/python- support/python2.5/Gnumed/wxpython/../etc/gnumed.conf'] 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/ home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): parsing config file [/home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmShellAPI.py:<module>@22): $Revision: 1.2 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:<module>@20): $Revision: 1.12 $ 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:<module>@33): $Revision: 1.76.2.1 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBusinessDBObject.py:<module>@143): $Revision: 1.46 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmMimeLib.py:<module>@21): $Revision: 1.14 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/business/gmMedDoc.py:<module>@21): $Revision: 1.100 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/business/gmDemographicRecord.py:<module>@30): $Revision: 1.93 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/business/gmAllergy.py:<module>@18): $Revision: 1.28 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/business/gmClinNarrative.py:<module>@18): $Revision: 1.27 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/business/gmEMRStructItems.py:<module>@19): $Revision: 1.103 $ 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/business/gmClinicalRecord.py:<module>@44): $Revision: 1.252 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/business/gmPerson.py:<module>@26): $Revision: 1.146.2.5 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:<module>@24): $Revision: 1.75 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPatPicWidgets.py:<module>@30): $Revision: 1.28 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/business/gmKVK.py:<module>@26): $Revision: 1.16.2.1 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmDataMiningWidgets.py:<module>@29): $Revision: 1.6 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmAuthWidgets.py:<module>@31): $Revision: 1.2.2.3 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPatSearchWidgets.py:<module>@31): $Revision: 1.97.2.2 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmAllergyWidgets.py:<module>@24): $Revision: 1.28.2.1 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmTopPanel.py:<module>@19): $Revision: 1.89 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmHorstSpace.py:<module>@34): $Revision: 1.40 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/exporters/gmPatientExporter.py:<module>@30): $Revision: 1.109.2.1 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmEMRStructWidgets.py:<module>@37): $Revision: 1.71.2.2 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmResizingWidgets.py:<module>@23): $Revision: 1.48 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmSOAPWidgets.py:<module>@22): $Revision: 1.95.2.2 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmNarrativeWidgets.py:<module>@24): $Revision: 1.6 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmEMRBrowser.py:<module>@24): $Revision: 1.81 $ 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmStaffWidgets.py:<module>@23): $Revision: 1.17.2.1 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmMedDocWidgets.py:<module>@24): $Revision: 1.150.2.2 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/business/gmForms.py:<module>@25): $Revision: 1.55.2.1 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmFormWidgets.py:<module>@24): $Revision: 1.7 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmProviderInboxWidgets.py:<module>@24): $Revision: 1.19.2.2 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiMain.py:<module>@68): $Revision: 1.375.2.17 $ 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiMain.py:<module>@69): wxPython GUI framework: 2.6.3.2 ('__WXGTK__', 'wxGTK', 'unicode', 'gtk2', 'wx-assertions- off', 'SWIG-1.3.27') 2008-09-30 16:37:32 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): group [backend] not found 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiMain.py:<module>@80): GNUmed client version [v0.2.8.10] 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiMain.py:<module>@81): expected database version [v8] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ home/kyle/gnumed.conf>) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): No config file given on command line. Format: --conf-file=<config file> 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: ['/home/kyle/gnumed.conf'] 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file [/home/ kyle/gnumed.conf] not found 2008-09-30 16:37:32 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config file in any of the standard paths 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ var/lib/python-support/python2.5/Gnumed/gnumed.conf>) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): No config file given on command line. Format: --conf-file=<config file> 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: ['/var/lib/python-support/python2.5/Gnumed/gnumed.conf'] 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file [/var/lib/ python-support/python2.5/Gnumed/gnumed.conf] not found 2008-09-30 16:37:32 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config file in any of the standard paths 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ home/kyle/.gnumed/gnumed.conf>) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): No config file given on command line. Format: --conf-file=<config file> 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: ['/home/kyle/.gnumed/gnumed.conf'] 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/ home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): parsing config file [/home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:37:32 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): group [workplace] not found 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ etc/gnumed/gnumed-client.conf>) 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): No config file given on command line. Format: --conf-file=<config file> 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: ['/etc/gnumed/gnumed-client.conf'] 2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file [/etc/ gnumed/gnumed-client.conf] not found 2008-09-30 16:37:32 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config file in any of the standard paths 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): local application base dir: /var/lib/python-support/python2.5/Gnumed 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): current working dir: / home/kyle 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): user home dir: /home/kyle 2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): user-specific config dir: /home/kyle/.gnumed 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): system-wide config dir: /etc 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): system-wide application data dir: /usr/share/gnumed 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ home/kyle/.gnumed/gnumed.conf>) 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line per cfg_IGNORE_CMD_LINE 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: [u'/home/kyle/.gnumed/gnumed.conf'] 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/ home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): parsing config file [/home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiMain.py:address@hidden): running on GTK (probably Linux) 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ home/kyle/gnumed.conf>) 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): No config file given on command line. Format: --conf-file=<config file> 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: ['/home/kyle/gnumed.conf'] 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file [/home/ kyle/gnumed.conf] not found 2008-09-30 16:37:33 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config file in any of the standard paths 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ var/lib/python-support/python2.5/Gnumed/gnumed.conf>) 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): No config file given on command line. Format: --conf-file=<config file> 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: ['/var/lib/python-support/python2.5/Gnumed/gnumed.conf'] 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file [/var/lib/ python-support/python2.5/Gnumed/gnumed.conf] not found 2008-09-30 16:37:33 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config file in any of the standard paths 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ home/kyle/.gnumed/gnumed.conf>) 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): No config file given on command line. Format: --conf-file=<config file> 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: [u'/home/kyle/.gnumed/gnumed.conf'] 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/ home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): parsing config file [/home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:37:33 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): group [workplace] not found 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ etc/gnumed-client.conf>) 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): No config file given on command line. Format: --conf-file=<config file> 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: [u'/etc/gnumed-client.conf'] 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file [/etc/ gnumed-client.conf] not found 2008-09-30 16:37:33 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config file in any of the standard paths 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ etc/gnumed-client.conf>) 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line per cfg_IGNORE_CMD_LINE 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: [u'/etc/gnumed-client.conf'] 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file [/etc/ gnumed-client.conf] not found 2008-09-30 16:37:33 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config file in any of the standard paths 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ home/kyle/.gnumed/gnumed.conf>) 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line per cfg_IGNORE_CMD_LINE 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: [u'/home/kyle/.gnumed/gnumed.conf'] 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/ home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): parsing config file [/home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:37:33 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): group [backend] not found 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ home/kyle/gnumed.conf>) 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line per cfg_IGNORE_CMD_LINE 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: ['/home/kyle/gnumed.conf'] 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file [/home/ kyle/gnumed.conf] not found 2008-09-30 16:37:33 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config file in any of the standard paths 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ home/kyle/.gnumed/gnumed.conf>) 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line per cfg_IGNORE_CMD_LINE 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: [u'/home/kyle/.gnumed/gnumed.conf'] 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/ home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): parsing config file [/home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:37:33 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): group [backend] not found 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ home/kyle/gnumed.conf>) 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line per cfg_IGNORE_CMD_LINE 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: ['/home/kyle/gnumed.conf'] 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file [/home/ kyle/gnumed.conf] not found 2008-09-30 16:37:33 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config file in any of the standard paths 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/ home/kyle/.gnumed/gnumed.conf>) 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line per cfg_IGNORE_CMD_LINE 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): config file search order: [u'/home/kyle/.gnumed/gnumed.conf'] 2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/ home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): parsing config file [/home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:37:33 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): group [preferences] not found 2008-09-30 16:37:33 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): group [preferences] not found 2008-09-30 16:37:46 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): group [workplace] not found 2008-09-30 16:37:59 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): group [workplace] not found 2008-09-30 16:38:10 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): group [workplace] not found 2008-09-30 16:42:26 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmAuthWidgets.py:address@hidden): debug mode disabled 2008-09-30 16:42:26 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmLog.py:address@hidden): SECURITY: log level change from [DATA] to [INFO] 2008-09-30 16:42:26 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmAuthWidgets.py:address@hidden): slave mode disabled 2008-09-30 16:42:28 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmPG2.py:address@hidden): PostgreSQL version (numeric): 8.1 2008-09-30 16:42:29 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmPG2.py:address@hidden): setting default login from [<Gnumed.pycommon.gmLoginInfo.LoginInfo instance at 0x8a246ac>] to [<Gnumed.pycommon.gmLoginInfo.LoginInfo instance at 0x8a246ac>] 2008-09-30 16:42:29 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmPG2.py:address@hidden): setting default DSN from [dbname=gnumed_v8 host=salaam.homeunix.com port=5432 user=any- doc password=any-doc sslmode=prefer] to [dbname=gnumed_v8 host=salaam.homeunix.com port=5432 user=any-doc password=any-doc sslmode=prefer] 2008-09-30 16:42:29 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmPG2.py:address@hidden): setting default client encoding from [UTF8] to [UTF8] 2008-09-30 16:42:32 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmPG2.py:address@hidden): PostgreSQL version (string): "PostgreSQL 8.1.11 on i486-pc-linux-gnu, compiled by GCC cc (GCC) 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)" 2008-09-30 16:42:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmPG2.py:address@hidden): detected schema version [v8], hash [89b13a7af83337c3aad153b717e52360] 2008-09-30 16:42:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line per cfg_IGNORE_CMD_LINE 2008-09-30 16:42:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/ home/kyle/.gnumed/gnumed.conf] 2008-09-30 16:42:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmPG2.py:address@hidden): checking database settings 2008-09-30 16:42:33 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:address@hidden): starting backend notifications listener thread 2008-09-30 16:42:34 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:address@hidden): configured patient specific notifications: 2008-09-30 16:42:34 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:address@hidden): [u'allg_mod_db', u'allg_state_mod_db', u'doc_mod_db', u'doc_page_mod_db', u'identity_mod_db', u'name_mod_db', u'vacc_mod_db'] 2008-09-30 16:42:34 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:address@hidden): configured unspecific notifications: 2008-09-30 16:42:34 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:address@hidden): [u'provider_inbox_mod_db'] 2008-09-30 16:42:34 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:address@hidden): listener process PID: [6505] 2008-09-30 16:42:34 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/ gmBackendListener.py:address@hidden): starting to listen for [provider_inbox_mod_db:] 2008-09-30 16:42:34 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:address@hidden): starting listener thread 2008-09-30 16:42:36 [WARN] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiMain.py:address@hidden): database locale [de_DE] does not match system locale [en_US] 2008-09-30 16:42:36 [WARN] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmCfg.py:address@hidden): group [backend] not found 2008-09-30 16:42:36 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-09-30 16:42:36 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-09-30 16:43:02 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiMain.py:address@hidden): neither OsiriX nor AMIDE nor xmedcon found, disabling "DICOM viewer" menu item 2008-09-30 16:43:06 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-09-30 16:43:06 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-09-30 16:43:06 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): gmProviderInboxPlugin 2008-09-30 16:43:06 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class: [gmProviderInboxPlugin] name: [Inbox] 2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gui/ gmNotebookedPatientEditionPlugin.py:<module>@30): $Revision: 1.8 $ 2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): gmNotebookedPatientEditionPlugin 2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class: [gmNotebookedPatientEditionPlugin] name: [Patient Details] 2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gui/gmEMRBrowserPlugin.py:<module>@17): $Revision: 1.14 $ 2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): gmEMRBrowserPlugin 2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class: [gmEMRBrowserPlugin] name: [EMR tree] 2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gui/ gmNotebookedProgressNoteInputPlugin.py:<module>@28): $Revision: 1.12 $ 2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): gmNotebookedProgressNoteInputPlugin 2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class: [gmNotebookedProgressNoteInputPlugin] name: [Progress notes] 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gui/gmEMRJournalPlugin.py:<module>@15): $Revision: 1.10 $ 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): gmEMRJournalPlugin 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class: [gmEMRJournalPlugin] name: [EMR journal] 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gui/gmShowMedDocs.py:<module>@24): $Revision: 1.71 $ 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): gmShowMedDocs 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class: [gmShowMedDocs] name: [Documents] 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): gmScanIdxMedDocsPlugin 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class: [gmScanIdxMedDocsPlugin] name: [Import Documents] 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmScanBackend.py:<module>@26): $Revision: 1.49.4.1 $ 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): gmKOrganizerPlugin 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class: [gmKOrganizerPlugin] name: [Appointments] 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): gmDataMiningPlugin 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class: [gmDataMiningPlugin] name: [Reports] 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/business/gmXdtObjects.py:<module>@24): $Revision: 1.29 $ 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gui/gmXdtViewer.py:<module>@28): $Revision: 1.29 $ 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): gmXdtViewer 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class: [gmXdtViewer] name: [xDT Viewer] 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gui/gmManual.py:<module>@28): $Revision: 1.43.4.1 $ 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): gmManual 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class: [gmManual] name: [Manual] 2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gui/gmManual.py:address@hidden): found Manual path [/ usr/share/doc/gnumed/user-manual/] 2008-09-30 16:43:12 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiMain.py:address@hidden): display: 1280:1024 2008-09-30 16:43:13 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-09-30 16:43:13 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-09-30 16:45:44 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-09-30 16:45:44 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-09-30 16:45:50 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-09-30 16:45:50 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): unhandled exception caught 2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception type : <type 'exceptions.AttributeError'> 2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception value: 'str' object has no attribute 'get_pydt' 2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): Traceback (most recent call last):<#10-0x0A-lf> 2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmGuiMain.py", line 1561, in __on_create_patient<#10-0x0A-lf> wiz.RunWizard(activate=True)<#10-0x0A-lf> 2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmDemographicsWidgets.py", line 1859, in RunWizard<#10-0x0A-lf> ident = create_identity_from_dtd(dtd = self.basic_pat_details.form_DTD)<#10-0x0A-lf> 2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmDemographicsWidgets.py", line 2288, in create_identity_from_dtd<#10-0x0A-lf> dob = dtd['dob'].get_pydt (),<#10-0x0A-lf> 2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): AttributeError: 'str' object has no attribute 'get_pydt'<#10-0x0A-lf> 2008-09-30 16:46:01 [WARN] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): syncing log file for backup to [/home/kyle/gnumed/logs/ gnumed_2008-09-30_16-46-01.log] 2008-09-30 16:46:09 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): user comment: 2008-09-30 16:46:12 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBusinessDBObject.py:address@hidden): [cIdentity:35]: no such instance 2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): unhandled exception caught 2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception type : <class 'Gnumed.pycommon.gmExceptions.ConstructorError'> 2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception value: [cIdentity:35]: error loading instance 2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): Traceback (most recent call last):<#10-0x0A-lf> 2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmProviderInboxWidgets.py", line 204, in _lst_item_activated<#10-0x0A- lf> if not handle_item(pk_context = msg[6]):<#10-0x0A-lf> 2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmProviderInboxWidgets.py", line 246, in _goto_doc_review<#10-0x0A- lf> if not gmPerson.set_active_patient(patient=gmPerson.cIdentity (aPK_obj=pk_context)):<#10-0x0A-lf> 2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/pycommon/ gmBusinessDBObject.py", line 193, in __init__<#10-0x0A-lf> self.__init_from_pk(aPK_obj=aPK_obj)<#10-0x0A-lf> 2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/pycommon/ gmBusinessDBObject.py", line 220, in __init_from_pk<#10-0x0A-lf> raise gmExceptions.ConstructorError, "[%s:%s]: error loading instance" % (self.__class__.__name__, self.pk_obj)<#10-0x0A-lf> 2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): ConstructorError: [cIdentity:35]: error loading instance<#10-0x0A-lf> 2008-09-30 16:46:12 [WARN] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): syncing log file for backup to [/home/kyle/gnumed/logs/ gnumed_2008-09-30_16-46-12.log] 2008-09-30 16:46:30 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): user comment: 2008-09-30 16:46:50 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmPatSearchWidgets.py:address@hidden): 4 person objects(s) fetched in 0.603 seconds 2008-09-30 16:47:23 [INFO] (/var/lib/python-support/python2.5/ Gnumed/business/gmMedDoc.py:address@hidden): no mugshots available for patient [100] 2008-09-30 16:47:26 [INFO] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmHorstSpace.py:address@hidden): cannot check whether notebook page change needs to be vetoed 2008-09-30 16:47:31 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-09-30 16:47:31 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-09-30 16:48:10 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-09-30 16:48:10 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-09-30 16:48:13 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-09-30 16:48:13 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-09-30 17:01:40 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-09-30 17:01:40 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-09-30 17:10:18 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-09-30 17:10:18 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-09-30 17:10:23 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-09-30 17:10:23 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-10-01 09:49:23 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-10-01 09:49:23 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-10-01 09:49:28 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:address@hidden): stopping backend notifications listener thread 2008-10-01 09:49:33 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:address@hidden): listener thread still alive after join() 2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): unhandled exception caught 2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception type : <class 'psycopg2.OperationalError'> 2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception value: connection not open
2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): Traceback (most recent call last):<#10-0x0A-lf> 2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmGuiMain.py", line 1321, in OnClose<#10-0x0A-lf> self._clean_exit ()<#10-0x0A-lf> 2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmGuiMain.py", line 1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf> 2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/pycommon/ gmBackendListener.py", line 97, in stop_thread<#10-0x0A-lf> self.__unregister_patient_notifications()<#10-0x0A-lf> 2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/pycommon/ gmBackendListener.py", line 179, in __unregister_patient_notifications<#10-0x0A-lf> self._cursor.execute(cmd)<#10-0x0A-lf> 2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/usr/lib/python2.5/site-packages/psycopg2/extras.py", line 85, in execute<#10-0x0A-lf> return _cursor.execute(self, query, vars, async)<#10-0x0A-lf> 2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): OperationalError: connection not open<#10-0x0A-lf><#10-0x0A-lf> 2008-10-01 09:49:34 [WARN] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): syncing log file for backup to [/home/kyle/gnumed/logs/ gnumed_2008-10-01_09-49-34.log] 2008-10-01 09:49:35 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-10-01 09:49:35 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-10-01 09:49:36 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): appending to sys.path: [/home/kyle/.gnumed/scripts] 2008-10-01 09:49:36 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmTools.py:address@hidden): imported module [hook_script] as [<module 'hook_script' from '/home/ kyle/.gnumed/scripts/hook_script.pyc'>] 2008-10-01 09:49:39 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): user comment: 2008-10-01 09:49:39 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:address@hidden): stopping backend notifications listener thread 2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): unhandled exception caught 2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception type : <class 'thread.error'> 2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception value: release unlocked lock 2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): Traceback (most recent call last):<#10-0x0A-lf> 2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmGuiMain.py", line 1321, in OnClose<#10-0x0A-lf> self._clean_exit ()<#10-0x0A-lf> 2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmGuiMain.py", line 1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf> 2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/pycommon/ gmBackendListener.py", line 87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf> 2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): error: release unlocked lock<#10-0x0A-lf> 2008-10-01 09:49:39 [WARN] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): syncing log file for backup to [/home/kyle/gnumed/logs/ gnumed_2008-10-01_09-49-39.log] 2008-10-01 09:49:41 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): user comment: 2008-10-01 09:49:41 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:address@hidden): stopping backend notifications listener thread 2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): unhandled exception caught 2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception type : <class 'thread.error'> 2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception value: release unlocked lock 2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): Traceback (most recent call last):<#10-0x0A-lf> 2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmGuiMain.py", line 1321, in OnClose<#10-0x0A-lf> self._clean_exit ()<#10-0x0A-lf> 2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmGuiMain.py", line 1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf> 2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/pycommon/ gmBackendListener.py", line 87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf> 2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): error: release unlocked lock<#10-0x0A-lf> 2008-10-01 09:49:41 [WARN] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): syncing log file for backup to [/home/kyle/gnumed/logs/ gnumed_2008-10-01_09-49-41.log] 2008-10-01 09:49:48 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): user comment: 2008-10-01 09:49:48 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:address@hidden): stopping backend notifications listener thread 2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): unhandled exception caught 2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception type : <class 'thread.error'> 2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception value: release unlocked lock 2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): Traceback (most recent call last):<#10-0x0A-lf> 2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmGuiMain.py", line 1321, in OnClose<#10-0x0A-lf> self._clean_exit ()<#10-0x0A-lf> 2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmGuiMain.py", line 1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf> 2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/pycommon/ gmBackendListener.py", line 87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf> 2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): error: release unlocked lock<#10-0x0A-lf> 2008-10-01 09:49:48 [WARN] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): syncing log file for backup to [/home/kyle/gnumed/logs/ gnumed_2008-10-01_09-49-48.log] 2008-10-01 09:49:51 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): user comment: 2008-10-01 09:49:53 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:address@hidden): stopping backend notifications listener thread 2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): unhandled exception caught 2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception type : <class 'thread.error'> 2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception value: release unlocked lock 2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): Traceback (most recent call last):<#10-0x0A-lf> 2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmGuiMain.py", line 1321, in OnClose<#10-0x0A-lf> self._clean_exit ()<#10-0x0A-lf> 2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmGuiMain.py", line 1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf> 2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/pycommon/ gmBackendListener.py", line 87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf> 2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): error: release unlocked lock<#10-0x0A-lf> 2008-10-01 09:49:53 [WARN] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): syncing log file for backup to [/home/kyle/gnumed/logs/ gnumed_2008-10-01_09-49-53.log] 2008-10-01 09:49:54 [ERROR] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): user comment: 2008-10-01 09:49:55 [INFO] (/var/lib/python-support/python2.5/ Gnumed/pycommon/gmBackendListener.py:address@hidden): stopping backend notifications listener thread 2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): unhandled exception caught 2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception type : <class 'thread.error'> 2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): exception value: release unlocked lock 2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): Traceback (most recent call last):<#10-0x0A-lf> 2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmGuiMain.py", line 1321, in OnClose<#10-0x0A-lf> self._clean_exit ()<#10-0x0A-lf> 2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/wxpython/ gmGuiMain.py", line 1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf> 2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): File "/var/lib/python-support/python2.5/Gnumed/pycommon/ gmBackendListener.py", line 87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf> 2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): error: release unlocked lock<#10-0x0A-lf> 2008-10-01 09:49:55 [WARN] (/var/lib/python-support/python2.5/ Gnumed/wxpython/gmGuiHelpers.py:address@hidden): syncing log file for backup to [/home/kyle/gnumed/logs/ gnumed_2008-10-01_09-49-55.log] 



_______________________________________________
Gnumed-devel mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/gnumed-devel
reply via email to
[Prev in Thread] Current Thread [Next in Thread]