[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Gnump3d-users] gnump3d not starting
From: |
ingo . schmitt |
Subject: |
Re: [Gnump3d-users] gnump3d not starting |
Date: |
Fri, 29 Aug 2008 23:47:30 +0200 (CEST) |
User-agent: |
SquirrelMail/1.4.15 |
Hi Michael,
I'd suggest to get back to the default config and restart from scratch.
cheers
catfish
On Fri, August 29, 2008 23:31, Michael Allen wrote:
> Sent this a few weeks ago, but am still in the same spot.
> Any help on this problem would be greatly appreciated.
>
> On Fri, Aug 15, 2008 at 10:42 AM, Michael Allen
> <address@hidden>wrote:
>
>> Hi,
>>
>> I recently built a newer ubuntu server and started gnump3d (v 3.0) up on
>> it.
>> It was working fine for a few weeks, until today, when I attempted to
>> include an IP in the allowed_clients = list. (appending a semicolon and
>> the
>> ip to the current list).
>>
>> I backed out that change and set it back to only allow my local network
>> ips
>> in:
>> allowed_clients = 192.168.1.0/8
>>
>> I may well have screwed up the configuration file, but can't get it
>> working
>> again. The odd thing is that it even has a process id (see below).
>> Using the older config file results in the same behavior.
>>
>> I run a restart of the daemon and it indicates that it wasn't running in
>> the first place:
>> $sudo /etc/init.d/gnump3d restart
>> Restarting gnump3d: start-stop-daemon: warning: failed to kill 17689: No
>> such process
>> gnump3d.
>>
>> I can confirm that it didn't start with this bit of bash (which returns
>> no
>> results):
>> $ps -A|grep gnump3d
>>
>> If I run just a start, i get this output, but again gnump3d doesn't
>> actually start:
>> $sudo /etc/init.d/gnump3d start
>> Starting gnump3d: gnump3d.
>>
>> Any help would be greatly appreciated
>>
> _______________________________________________
> Gnump3d-users mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/gnump3d-users
>