[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: GPS Devices tested with gpsd V3.22 on Raspberry PI Zero 2 W/BullsEye
From: |
Gary E. Miller |
Subject: |
Re: GPS Devices tested with gpsd V3.22 on Raspberry PI Zero 2 W/BullsEye Raspbian |
Date: |
Thu, 30 Dec 2021 18:32:53 -0800 |
Yo Don!
On Thu, 30 Dec 2021 16:53:25 -0500
Don Rolph <don.rolph@gmail.com> wrote:
> Note that gpsd V3.22 in this testing has shown problems with
> autobauding devices which run at 9600 baud. Devices at 4800 baud
> work fine without setting speed.
Which is one of many reasons why 3.23.1 is out, and 3.23.2 coming soon.
Autobaud works much better now.
3.22 is 18 monhts old. Don't use it.
> Adafruit ultimate USB GPS. MTK3333 chip. requires gpsd to have
> speed set to 9600 baud
> - https://www.adafruit.com/product/4279
Changable, with some effort.
> Stratux GPSYes 2.0. ublox 8; requires gpsd 3.22 to have speed set to
> 9600 baud
Ditto.
> GPS/GLONASS USB dongle. U-blox 7
> -
> https://smile.amazon.com/dp/B086KXB2KS?psc=1&ref=ppx_yo2_dt_b_product_details
>
> VFAN Model UG-353 U-blox 7
> -
> https://smile.amazon.com/dp/B073P3Y48Q?psc=1&ref=ppx_yo2_dt_b_product_details
Avoaid anything u-blox less than 8.
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
gem@rellim.com Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can't measure it, you can't improve it." - Lord Kelvin
pgp72gLf5paS6.pgp
Description: OpenPGP digital signature