Re: Gpsd sending SKY message twice

[Gary E. Miller]

Yo Tomáš!

On Mon, 21 Nov 2022 13:29:04 +0100
Tomáš Vostřel <vostrelt@gmail.com> wrote:

> I have a question about the gpsd daemon behaviour. I think it's
> working very well, but (at least) one think I don't understand. Why
> does it periodically every second send me SKY message twice in a
> short time?

I guess this should be in the FAQ.

The problem is that GNSS receivers never tell you what they are going to
send, or when they are done sending data for any one epoch.  So
gpsd has to guess.  This is only getting worse with multi-constellation
receiers, and the dogs dinner that is NMEA 4.11

In you case, gpsd guess that your receiver is done sending sky data, so
gpsd passes that data on the client.  But then more sky data appears, so
gpsd sends an updated sky message.


> There is satellites data class present in the first
> message. No satellite data in the second one. As a result, the
> satellite_t array in gps_data_t structure filled with gps_read () is
> empty.

Almost everything in gps_data_t is empty almost all the time.  That is
why you have to always check the _SET flags, and use isfinite() before
reading data from it.

Before we can help you furhter, you need to run gpsdebuginfo, and send
us the output.  That is easier for us all, rather than playing 20
questions to get the important info from you that you have not already
provided.

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        gem@rellim.com  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin

pgphbriI0miV7.pgp
Description: OpenPGP digital signature