=========================================== GNU roff 1.23.0.rc3: ./test-suite.log =========================================== # TOTAL: 159 # PASS: 151 # SKIP: 5 # XFAIL: 2 # FAIL: 1 # XPASS: 0 # ERROR: 0 .. contents:: :depth: 2 FAIL: contrib/gdiffmk/tests/runtests.sh ======================================= ./contrib/gdiffmk/tests/result.1 TEST FAILED --- ../contrib/gdiffmk/tests/baseline +++ ./contrib/gdiffmk/tests/result.1 @@ -1,17 +1,36 @@ -.ll 25 -.pl 20 -.nf -file1 and file2 #1 -.mc | -file2 only -file2 only -.mc -file1 and file2 #2 -.mc + -file2 only -.mc -file1 and file2 #3 -.mc * -.mc -file1 and file2 #4 -file1 and file2 #5 +gdiffmk: The 'diff' program does not accept the required '-Dname' option. +Use GNU diff instead. See the '-x DIFFCMD' option. You can also +install GNU diff as gdiff on your system + +Usage: gdiffmk [ OPTIONS ] FILE1 FILE2 [ OUTPUT ] +Place difference marks into the new version of a groff/nroff/troff document. +FILE1 and FILE2 are compared, using 'diff', and FILE2 is output with +groff '.mc' requests added to indicate how it is different from FILE1. + + FILE1 Previous version of the groff file. '-' means standard input. + FILE2 Current version of the groff file. '-' means standard input. + Either FILE1 or FILE2 can be standard input, but not both. + OUTPUT Copy of FILE2 with '.mc' commands added. + '-' means standard output (the default). + If the shell's 'test' does not support option -ef, OUTPUT + can only be the standard output. + +OPTIONS: + -a ADDMARK Mark for added groff source lines. Default: '+'. + -c CHANGEMARK Mark for changed groff source lines. Default: '|'. + -d DELETEMARK Mark for deleted groff source lines. Default: '*'. + + -D Show the deleted portions from changed and deleted text. + Default delimiting marks: '[[' .... ']]'. + -B By default, the deleted texts marked by the '-D' option end + with an added troff '.br' command. This option prevents + the added '.br'. + -M MARK1 MARK2 Change the delimiting marks for the '-D' option. + + -x DIFFCMD Use a different diff(1) command; + one that accepts the '-Dname' option, such as GNU diff. + -s SEDCMD Use a different sed(1) command; + such as GNU sed. + --version Print version information on the standard output and exit. + --help Print this message on the standard error. + ./contrib/gdiffmk/tests/result.2 TEST FAILED --- ../contrib/gdiffmk/tests/baseline +++ ./contrib/gdiffmk/tests/result.2 @@ -1,17 +1,36 @@ -.ll 25 -.pl 20 -.nf -file1 and file2 #1 -.mc | -file2 only -file2 only -.mc -file1 and file2 #2 -.mc + -file2 only -.mc -file1 and file2 #3 -.mc * -.mc -file1 and file2 #4 -file1 and file2 #5 +gdiffmk: The 'diff' program does not accept the required '-Dname' option. +Use GNU diff instead. See the '-x DIFFCMD' option. You can also +install GNU diff as gdiff on your system + +Usage: gdiffmk [ OPTIONS ] FILE1 FILE2 [ OUTPUT ] +Place difference marks into the new version of a groff/nroff/troff document. +FILE1 and FILE2 are compared, using 'diff', and FILE2 is output with +groff '.mc' requests added to indicate how it is different from FILE1. + + FILE1 Previous version of the groff file. '-' means standard input. + FILE2 Current version of the groff file. '-' means standard input. + Either FILE1 or FILE2 can be standard input, but not both. + OUTPUT Copy of FILE2 with '.mc' commands added. + '-' means standard output (the default). + If the shell's 'test' does not support option -ef, OUTPUT + can only be the standard output. + +OPTIONS: + -a ADDMARK Mark for added groff source lines. Default: '+'. + -c CHANGEMARK Mark for changed groff source lines. Default: '|'. + -d DELETEMARK Mark for deleted groff source lines. Default: '*'. + + -D Show the deleted portions from changed and deleted text. + Default delimiting marks: '[[' .... ']]'. + -B By default, the deleted texts marked by the '-D' option end + with an added troff '.br' command. This option prevents + the added '.br'. + -M MARK1 MARK2 Change the delimiting marks for the '-D' option. + + -x DIFFCMD Use a different diff(1) command; + one that accepts the '-Dname' option, such as GNU diff. + -s SEDCMD Use a different sed(1) command; + such as GNU sed. + --version Print version information on the standard output and exit. + --help Print this message on the standard error. + ./contrib/gdiffmk/tests/result.3 TEST FAILED --- ../contrib/gdiffmk/tests/baseline +++ ./contrib/gdiffmk/tests/result.3 @@ -1,17 +1,36 @@ -.ll 25 -.pl 20 -.nf -file1 and file2 #1 -.mc | -file2 only -file2 only -.mc -file1 and file2 #2 -.mc + -file2 only -.mc -file1 and file2 #3 -.mc * -.mc -file1 and file2 #4 -file1 and file2 #5 +gdiffmk: The 'diff' program does not accept the required '-Dname' option. +Use GNU diff instead. See the '-x DIFFCMD' option. You can also +install GNU diff as gdiff on your system + +Usage: gdiffmk [ OPTIONS ] FILE1 FILE2 [ OUTPUT ] +Place difference marks into the new version of a groff/nroff/troff document. +FILE1 and FILE2 are compared, using 'diff', and FILE2 is output with +groff '.mc' requests added to indicate how it is different from FILE1. + + FILE1 Previous version of the groff file. '-' means standard input. + FILE2 Current version of the groff file. '-' means standard input. + Either FILE1 or FILE2 can be standard input, but not both. + OUTPUT Copy of FILE2 with '.mc' commands added. + '-' means standard output (the default). + If the shell's 'test' does not support option -ef, OUTPUT + can only be the standard output. + +OPTIONS: + -a ADDMARK Mark for added groff source lines. Default: '+'. + -c CHANGEMARK Mark for changed groff source lines. Default: '|'. + -d DELETEMARK Mark for deleted groff source lines. Default: '*'. + + -D Show the deleted portions from changed and deleted text. + Default delimiting marks: '[[' .... ']]'. + -B By default, the deleted texts marked by the '-D' option end + with an added troff '.br' command. This option prevents + the added '.br'. + -M MARK1 MARK2 Change the delimiting marks for the '-D' option. + + -x DIFFCMD Use a different diff(1) command; + one that accepts the '-Dname' option, such as GNU diff. + -s SEDCMD Use a different sed(1) command; + such as GNU sed. + --version Print version information on the standard output and exit. + --help Print this message on the standard error. + ./contrib/gdiffmk/tests/result.4 TEST FAILED --- ../contrib/gdiffmk/tests/baseline +++ ./contrib/gdiffmk/tests/result.4 @@ -1,17 +1,36 @@ -.ll 25 -.pl 20 -.nf -file1 and file2 #1 -.mc | -file2 only -file2 only -.mc -file1 and file2 #2 -.mc + -file2 only -.mc -file1 and file2 #3 -.mc * -.mc -file1 and file2 #4 -file1 and file2 #5 +gdiffmk: The 'diff' program does not accept the required '-Dname' option. +Use GNU diff instead. See the '-x DIFFCMD' option. You can also +install GNU diff as gdiff on your system + +Usage: gdiffmk [ OPTIONS ] FILE1 FILE2 [ OUTPUT ] +Place difference marks into the new version of a groff/nroff/troff document. +FILE1 and FILE2 are compared, using 'diff', and FILE2 is output with +groff '.mc' requests added to indicate how it is different from FILE1. + + FILE1 Previous version of the groff file. '-' means standard input. + FILE2 Current version of the groff file. '-' means standard input. + Either FILE1 or FILE2 can be standard input, but not both. + OUTPUT Copy of FILE2 with '.mc' commands added. + '-' means standard output (the default). + If the shell's 'test' does not support option -ef, OUTPUT + can only be the standard output. + +OPTIONS: + -a ADDMARK Mark for added groff source lines. Default: '+'. + -c CHANGEMARK Mark for changed groff source lines. Default: '|'. + -d DELETEMARK Mark for deleted groff source lines. Default: '*'. + + -D Show the deleted portions from changed and deleted text. + Default delimiting marks: '[[' .... ']]'. + -B By default, the deleted texts marked by the '-D' option end + with an added troff '.br' command. This option prevents + the added '.br'. + -M MARK1 MARK2 Change the delimiting marks for the '-D' option. + + -x DIFFCMD Use a different diff(1) command; + one that accepts the '-Dname' option, such as GNU diff. + -s SEDCMD Use a different sed(1) command; + such as GNU sed. + --version Print version information on the standard output and exit. + --help Print this message on the standard error. + ./contrib/gdiffmk/tests/result.5 TEST FAILED --- ../contrib/gdiffmk/tests/baseline +++ ./contrib/gdiffmk/tests/result.5 @@ -1,17 +1,36 @@ -.ll 25 -.pl 20 -.nf -file1 and file2 #1 -.mc | -file2 only -file2 only -.mc -file1 and file2 #2 -.mc + -file2 only -.mc -file1 and file2 #3 -.mc * -.mc -file1 and file2 #4 -file1 and file2 #5 +gdiffmk: The 'diff' program does not accept the required '-Dname' option. +Use GNU diff instead. See the '-x DIFFCMD' option. You can also +install GNU diff as gdiff on your system + +Usage: gdiffmk [ OPTIONS ] FILE1 FILE2 [ OUTPUT ] +Place difference marks into the new version of a groff/nroff/troff document. +FILE1 and FILE2 are compared, using 'diff', and FILE2 is output with +groff '.mc' requests added to indicate how it is different from FILE1. + + FILE1 Previous version of the groff file. '-' means standard input. + FILE2 Current version of the groff file. '-' means standard input. + Either FILE1 or FILE2 can be standard input, but not both. + OUTPUT Copy of FILE2 with '.mc' commands added. + '-' means standard output (the default). + If the shell's 'test' does not support option -ef, OUTPUT + can only be the standard output. + +OPTIONS: + -a ADDMARK Mark for added groff source lines. Default: '+'. + -c CHANGEMARK Mark for changed groff source lines. Default: '|'. + -d DELETEMARK Mark for deleted groff source lines. Default: '*'. + + -D Show the deleted portions from changed and deleted text. + Default delimiting marks: '[[' .... ']]'. + -B By default, the deleted texts marked by the '-D' option end + with an added troff '.br' command. This option prevents + the added '.br'. + -M MARK1 MARK2 Change the delimiting marks for the '-D' option. + + -x DIFFCMD Use a different diff(1) command; + one that accepts the '-Dname' option, such as GNU diff. + -s SEDCMD Use a different sed(1) command; + such as GNU sed. + --version Print version information on the standard output and exit. + --help Print this message on the standard error. + ./contrib/gdiffmk/tests/result.6 TEST FAILED --- ../contrib/gdiffmk/tests/baseline.6 +++ ./contrib/gdiffmk/tests/result.6 @@ -1,17 +1,36 @@ -.ll 25 -.pl 20 -.nf -file1 and file2 #1 -.mc C -file2 only -file2 only -.mc -file1 and file2 #2 -.mc A -file2 only -.mc -file1 and file2 #3 -.mc D -.mc -file1 and file2 #4 -file1 and file2 #5 +gdiffmk: The 'diff' program does not accept the required '-Dname' option. +Use GNU diff instead. See the '-x DIFFCMD' option. You can also +install GNU diff as gdiff on your system + +Usage: gdiffmk [ OPTIONS ] FILE1 FILE2 [ OUTPUT ] +Place difference marks into the new version of a groff/nroff/troff document. +FILE1 and FILE2 are compared, using 'diff', and FILE2 is output with +groff '.mc' requests added to indicate how it is different from FILE1. + + FILE1 Previous version of the groff file. '-' means standard input. + FILE2 Current version of the groff file. '-' means standard input. + Either FILE1 or FILE2 can be standard input, but not both. + OUTPUT Copy of FILE2 with '.mc' commands added. + '-' means standard output (the default). + If the shell's 'test' does not support option -ef, OUTPUT + can only be the standard output. + +OPTIONS: + -a ADDMARK Mark for added groff source lines. Default: '+'. + -c CHANGEMARK Mark for changed groff source lines. Default: '|'. + -d DELETEMARK Mark for deleted groff source lines. Default: '*'. + + -D Show the deleted portions from changed and deleted text. + Default delimiting marks: '[[' .... ']]'. + -B By default, the deleted texts marked by the '-D' option end + with an added troff '.br' command. This option prevents + the added '.br'. + -M MARK1 MARK2 Change the delimiting marks for the '-D' option. + + -x DIFFCMD Use a different diff(1) command; + one that accepts the '-Dname' option, such as GNU diff. + -s SEDCMD Use a different sed(1) command; + such as GNU sed. + --version Print version information on the standard output and exit. + --help Print this message on the standard error. + ./contrib/gdiffmk/tests/result.6a TEST FAILED --- ../contrib/gdiffmk/tests/baseline.6a +++ ./contrib/gdiffmk/tests/result.6a @@ -1,17 +1,36 @@ -.ll 25 -.pl 20 -.nf -file1 and file2 #1 -.mc C -file2 only -file2 only -.mc -file1 and file2 #2 -.mc A -file2 only -.mc -file1 and file2 #3 -.mc D -.mc -file1 and file2 #4 -file1 and file2 #5 +gdiffmk: The 'diff' program does not accept the required '-Dname' option. +Use GNU diff instead. See the '-x DIFFCMD' option. You can also +install GNU diff as gdiff on your system + +Usage: gdiffmk [ OPTIONS ] FILE1 FILE2 [ OUTPUT ] +Place difference marks into the new version of a groff/nroff/troff document. +FILE1 and FILE2 are compared, using 'diff', and FILE2 is output with +groff '.mc' requests added to indicate how it is different from FILE1. + + FILE1 Previous version of the groff file. '-' means standard input. + FILE2 Current version of the groff file. '-' means standard input. + Either FILE1 or FILE2 can be standard input, but not both. + OUTPUT Copy of FILE2 with '.mc' commands added. + '-' means standard output (the default). + If the shell's 'test' does not support option -ef, OUTPUT + can only be the standard output. + +OPTIONS: + -a ADDMARK Mark for added groff source lines. Default: '+'. + -c CHANGEMARK Mark for changed groff source lines. Default: '|'. + -d DELETEMARK Mark for deleted groff source lines. Default: '*'. + + -D Show the deleted portions from changed and deleted text. + Default delimiting marks: '[[' .... ']]'. + -B By default, the deleted texts marked by the '-D' option end + with an added troff '.br' command. This option prevents + the added '.br'. + -M MARK1 MARK2 Change the delimiting marks for the '-D' option. + + -x DIFFCMD Use a different diff(1) command; + one that accepts the '-Dname' option, such as GNU diff. + -s SEDCMD Use a different sed(1) command; + such as GNU sed. + --version Print version information on the standard output and exit. + --help Print this message on the standard error. + ./contrib/gdiffmk/tests/result.7 TEST FAILED --- ../contrib/gdiffmk/tests/baseline.7 +++ ./contrib/gdiffmk/tests/result.7 @@ -1,2 +1,36 @@ -gdiffmk: The FILE2 and OUTPUT arguments both point to the same file, -gdiffmk: './contrib/gdiffmk/tests/tmp_file.7', and it would be overwritten. +gdiffmk: The 'diff' program does not accept the required '-Dname' option. +Use GNU diff instead. See the '-x DIFFCMD' option. You can also +install GNU diff as gdiff on your system + +Usage: gdiffmk [ OPTIONS ] FILE1 FILE2 [ OUTPUT ] +Place difference marks into the new version of a groff/nroff/troff document. +FILE1 and FILE2 are compared, using 'diff', and FILE2 is output with +groff '.mc' requests added to indicate how it is different from FILE1. + + FILE1 Previous version of the groff file. '-' means standard input. + FILE2 Current version of the groff file. '-' means standard input. + Either FILE1 or FILE2 can be standard input, but not both. + OUTPUT Copy of FILE2 with '.mc' commands added. + '-' means standard output (the default). + If the shell's 'test' does not support option -ef, OUTPUT + can only be the standard output. + +OPTIONS: + -a ADDMARK Mark for added groff source lines. Default: '+'. + -c CHANGEMARK Mark for changed groff source lines. Default: '|'. + -d DELETEMARK Mark for deleted groff source lines. Default: '*'. + + -D Show the deleted portions from changed and deleted text. + Default delimiting marks: '[[' .... ']]'. + -B By default, the deleted texts marked by the '-D' option end + with an added troff '.br' command. This option prevents + the added '.br'. + -M MARK1 MARK2 Change the delimiting marks for the '-D' option. + + -x DIFFCMD Use a different diff(1) command; + one that accepts the '-Dname' option, such as GNU diff. + -s SEDCMD Use a different sed(1) command; + such as GNU sed. + --version Print version information on the standard output and exit. + --help Print this message on the standard error. + ./contrib/gdiffmk/tests/result.8 TEST FAILED --- ../contrib/gdiffmk/tests/baseline.8 +++ ./contrib/gdiffmk/tests/result.8 @@ -1,26 +1,36 @@ -.ll 25 -.pl 20 -.nf -file1 and file2 #1 -[[ -file1 only -]] -.br -.mc | -file2 only -file2 only -.mc -file1 and file2 #2 -.mc + -file2 only -.mc -file1 and file2 #3 -[[ -file1 only -file1 only -]] -.br -.mc * -.mc -file1 and file2 #4 -file1 and file2 #5 +gdiffmk: The 'diff' program does not accept the required '-Dname' option. +Use GNU diff instead. See the '-x DIFFCMD' option. You can also +install GNU diff as gdiff on your system + +Usage: gdiffmk [ OPTIONS ] FILE1 FILE2 [ OUTPUT ] +Place difference marks into the new version of a groff/nroff/troff document. +FILE1 and FILE2 are compared, using 'diff', and FILE2 is output with +groff '.mc' requests added to indicate how it is different from FILE1. + + FILE1 Previous version of the groff file. '-' means standard input. + FILE2 Current version of the groff file. '-' means standard input. + Either FILE1 or FILE2 can be standard input, but not both. + OUTPUT Copy of FILE2 with '.mc' commands added. + '-' means standard output (the default). + If the shell's 'test' does not support option -ef, OUTPUT + can only be the standard output. + +OPTIONS: + -a ADDMARK Mark for added groff source lines. Default: '+'. + -c CHANGEMARK Mark for changed groff source lines. Default: '|'. + -d DELETEMARK Mark for deleted groff source lines. Default: '*'. + + -D Show the deleted portions from changed and deleted text. + Default delimiting marks: '[[' .... ']]'. + -B By default, the deleted texts marked by the '-D' option end + with an added troff '.br' command. This option prevents + the added '.br'. + -M MARK1 MARK2 Change the delimiting marks for the '-D' option. + + -x DIFFCMD Use a different diff(1) command; + one that accepts the '-Dname' option, such as GNU diff. + -s SEDCMD Use a different sed(1) command; + such as GNU sed. + --version Print version information on the standard output and exit. + --help Print this message on the standard error. + ./contrib/gdiffmk/tests/result.9 TEST FAILED --- ../contrib/gdiffmk/tests/baseline.9 +++ ./contrib/gdiffmk/tests/result.9 @@ -1,26 +1,36 @@ -.ll 25 -.pl 20 -.nf -file1 and file2 #1 -<<<< -file1 only ->>>> -.br -.mc | -file2 only -file2 only -.mc -file1 and file2 #2 -.mc + -file2 only -.mc -file1 and file2 #3 -<<<< -file1 only -file1 only ->>>> -.br -.mc * -.mc -file1 and file2 #4 -file1 and file2 #5 +gdiffmk: The 'diff' program does not accept the required '-Dname' option. +Use GNU diff instead. See the '-x DIFFCMD' option. You can also +install GNU diff as gdiff on your system + +Usage: gdiffmk [ OPTIONS ] FILE1 FILE2 [ OUTPUT ] +Place difference marks into the new version of a groff/nroff/troff document. +FILE1 and FILE2 are compared, using 'diff', and FILE2 is output with +groff '.mc' requests added to indicate how it is different from FILE1. + + FILE1 Previous version of the groff file. '-' means standard input. + FILE2 Current version of the groff file. '-' means standard input. + Either FILE1 or FILE2 can be standard input, but not both. + OUTPUT Copy of FILE2 with '.mc' commands added. + '-' means standard output (the default). + If the shell's 'test' does not support option -ef, OUTPUT + can only be the standard output. + +OPTIONS: + -a ADDMARK Mark for added groff source lines. Default: '+'. + -c CHANGEMARK Mark for changed groff source lines. Default: '|'. + -d DELETEMARK Mark for deleted groff source lines. Default: '*'. + + -D Show the deleted portions from changed and deleted text. + Default delimiting marks: '[[' .... ']]'. + -B By default, the deleted texts marked by the '-D' option end + with an added troff '.br' command. This option prevents + the added '.br'. + -M MARK1 MARK2 Change the delimiting marks for the '-D' option. + + -x DIFFCMD Use a different diff(1) command; + one that accepts the '-Dname' option, such as GNU diff. + -s SEDCMD Use a different sed(1) command; + such as GNU sed. + --version Print version information on the standard output and exit. + --help Print this message on the standard error. + ./contrib/gdiffmk/tests/result.9a TEST FAILED --- ../contrib/gdiffmk/tests/baseline.9a +++ ./contrib/gdiffmk/tests/result.9a @@ -1,26 +1,36 @@ -.ll 25 -.pl 20 -.nf -file1 and file2 #1 -<<<< -file1 only ->>>> -.br -.mc | -file2 only -file2 only -.mc -file1 and file2 #2 -.mc + -file2 only -.mc -file1 and file2 #3 -<<<< -file1 only -file1 only ->>>> -.br -.mc * -.mc -file1 and file2 #4 -file1 and file2 #5 +gdiffmk: The 'diff' program does not accept the required '-Dname' option. +Use GNU diff instead. See the '-x DIFFCMD' option. You can also +install GNU diff as gdiff on your system + +Usage: gdiffmk [ OPTIONS ] FILE1 FILE2 [ OUTPUT ] +Place difference marks into the new version of a groff/nroff/troff document. +FILE1 and FILE2 are compared, using 'diff', and FILE2 is output with +groff '.mc' requests added to indicate how it is different from FILE1. + + FILE1 Previous version of the groff file. '-' means standard input. + FILE2 Current version of the groff file. '-' means standard input. + Either FILE1 or FILE2 can be standard input, but not both. + OUTPUT Copy of FILE2 with '.mc' commands added. + '-' means standard output (the default). + If the shell's 'test' does not support option -ef, OUTPUT + can only be the standard output. + +OPTIONS: + -a ADDMARK Mark for added groff source lines. Default: '+'. + -c CHANGEMARK Mark for changed groff source lines. Default: '|'. + -d DELETEMARK Mark for deleted groff source lines. Default: '*'. + + -D Show the deleted portions from changed and deleted text. + Default delimiting marks: '[[' .... ']]'. + -B By default, the deleted texts marked by the '-D' option end + with an added troff '.br' command. This option prevents + the added '.br'. + -M MARK1 MARK2 Change the delimiting marks for the '-D' option. + + -x DIFFCMD Use a different diff(1) command; + one that accepts the '-Dname' option, such as GNU diff. + -s SEDCMD Use a different sed(1) command; + such as GNU sed. + --version Print version information on the standard output and exit. + --help Print this message on the standard error. + ./contrib/gdiffmk/tests/result.10 TEST FAILED --- ../contrib/gdiffmk/tests/baseline.10 +++ ./contrib/gdiffmk/tests/result.10 @@ -1,26 +1,36 @@ -.ll 25 -.pl 20 -.nf -file1 and file2 #1 -[[ -file1 only -]] -. -.mc | -file2 only -file2 only -.mc -file1 and file2 #2 -.mc + -file2 only -.mc -file1 and file2 #3 -[[ -file1 only -file1 only -]] -. -.mc * -.mc -file1 and file2 #4 -file1 and file2 #5 +gdiffmk: The 'diff' program does not accept the required '-Dname' option. +Use GNU diff instead. See the '-x DIFFCMD' option. You can also +install GNU diff as gdiff on your system + +Usage: gdiffmk [ OPTIONS ] FILE1 FILE2 [ OUTPUT ] +Place difference marks into the new version of a groff/nroff/troff document. +FILE1 and FILE2 are compared, using 'diff', and FILE2 is output with +groff '.mc' requests added to indicate how it is different from FILE1. + + FILE1 Previous version of the groff file. '-' means standard input. + FILE2 Current version of the groff file. '-' means standard input. + Either FILE1 or FILE2 can be standard input, but not both. + OUTPUT Copy of FILE2 with '.mc' commands added. + '-' means standard output (the default). + If the shell's 'test' does not support option -ef, OUTPUT + can only be the standard output. + +OPTIONS: + -a ADDMARK Mark for added groff source lines. Default: '+'. + -c CHANGEMARK Mark for changed groff source lines. Default: '|'. + -d DELETEMARK Mark for deleted groff source lines. Default: '*'. + + -D Show the deleted portions from changed and deleted text. + Default delimiting marks: '[[' .... ']]'. + -B By default, the deleted texts marked by the '-D' option end + with an added troff '.br' command. This option prevents + the added '.br'. + -M MARK1 MARK2 Change the delimiting marks for the '-D' option. + + -x DIFFCMD Use a different diff(1) command; + one that accepts the '-Dname' option, such as GNU diff. + -s SEDCMD Use a different sed(1) command; + such as GNU sed. + --version Print version information on the standard output and exit. + --help Print this message on the standard error. + failure_count 12 FAIL contrib/gdiffmk/tests/runtests.sh (exit status: 1) SKIP: contrib/hdtbl/examples/test-hdtbl.sh ========================================== ghostscript program missing, can't check hdtbl examples SKIP contrib/hdtbl/examples/test-hdtbl.sh (exit status: 77) SKIP: src/devices/grotty/tests/basic_latin_glyphs_map_correctly.sh ================================================================== checking "ascii" output device...group1 group2 group3 " \ ` ' - ^ ~ checking "latin1" output device...group1 group2 group3 " \ ` ' - ^ ~ ../src/devices/grotty/tests/basic_latin_glyphs_map_correctly.sh: line 124: locale: not found SKIP src/devices/grotty/tests/basic_latin_glyphs_map_correctly.sh (exit status: 77) SKIP: src/preproc/preconv/tests/smoke-test.sh ============================================= testing -e flag override of BOM detection testing detection of UTF-32BE BOM testing detection of UTF-32LE BOM testing detection of UTF-16BE BOM testing detection of UTF-16LE BOM testing detection of UTF-8 BOM testing detection of Emacs coding tag in piped input testing uchardet detection of encoding SKIP src/preproc/preconv/tests/smoke-test.sh (exit status: 77) XFAIL: src/roff/groff/tests/string_case_xform_unicode_escape.sh =============================================================== XFAIL src/roff/groff/tests/string_case_xform_unicode_escape.sh (exit status: 1) XFAIL: tmac/tests/e_footnotes-work-with-columns.sh ================================================== e.tmac::5: changing columnation with footnote pending e.tmac::7: writing 2-column footnote in 1-column layout XFAIL tmac/tests/e_footnotes-work-with-columns.sh (exit status: 1) SKIP: tmac/tests/pdfpic_does-not-choke-on-bad-pdfinfo-output.sh =============================================================== cannot locate 'gs' command SKIP tmac/tests/pdfpic_does-not-choke-on-bad-pdfinfo-output.sh (exit status: 77) SKIP: tmac/tests/pdfpic_falls-back-to-PSPIC.sh ============================================== cannot locate 'gs' command SKIP tmac/tests/pdfpic_falls-back-to-PSPIC.sh (exit status: 77)