[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2 7/8] efi: implement LoadFile2 initrd loading protocol for
From: |
Atish Patra |
Subject: |
Re: [PATCH v2 7/8] efi: implement LoadFile2 initrd loading protocol for Linux |
Date: |
Mon, 26 Oct 2020 14:37:59 -0700 |
On Sun, Oct 25, 2020 at 6:50 AM Ard Biesheuvel <ard.biesheuvel@arm.com> wrote:
>
> Recent Linux kernels will invoke the LoadFile2 protocol installed on a
> well-known vendor media devicepath to load the initrd if it is exposed
> by the firmware. Using this method is preferred for two reasons:
> - the Linux kernel is in charge of allocating the memory, and so it can
> implement any placement policy it wants (given that these tend to
> change between kernel versions),
> - it is no longer necessary to modify the device tree provided by the
> firmware.
>
> So let's install this protocol when handling the 'initrd' command if
> such a recent kernel was detected (based on the PE/COFF image version),
> and defer loading the initrd contents until the point where the kernel
> invokes the LoadFile2 protocol.
>
Thanks for adding the support for LoadFile2 protocol. This was one of
the blockers for full RISC-V support.
How do you prefer to proceed with RISC-V support ?
For RISC-V, we just need to move the arm64 loader to a common file so
that both RISC-V/ARM64 can use it apart from
few header file fixes. During the last attempt[1], I moved it to
loader/efi/linux.c.
I am happy to test it on Qemu/hardware, if you want to send the series
either part of this one or a separate series.
I can rebase my previous series on top of this series as well. Please
let me know your preference.
[1] https://www.mail-archive.com/grub-devel@gnu.org/msg30107.html
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
> ---
> grub-core/loader/arm64/linux.c | 109 +++++++++++++++++++-
> 1 file changed, 108 insertions(+), 1 deletion(-)
>
> diff --git a/grub-core/loader/arm64/linux.c b/grub-core/loader/arm64/linux.c
> index 28ff8584a3b5..c6a95e1f0c43 100644
> --- a/grub-core/loader/arm64/linux.c
> +++ b/grub-core/loader/arm64/linux.c
> @@ -48,6 +48,10 @@ static grub_uint32_t cmdline_size;
> static grub_addr_t initrd_start;
> static grub_addr_t initrd_end;
>
> +static struct grub_linux_initrd_context initrd_ctx = { 0, 0, 0 };
> +static grub_efi_handle_t initrd_lf2_handle;
> +static int initrd_use_loadfile2;
> +
> grub_err_t
> grub_arch_efi_linux_load_image_header (grub_file_t file,
> struct linux_arch_kernel_header * lh)
> @@ -81,6 +85,18 @@ grub_arch_efi_linux_load_image_header (grub_file_t file,
> return grub_error(GRUB_ERR_FILE_READ_ERROR, "failed to read COFF
> image header");
> }
>
> + /*
> + * Linux kernels built for any architecture are guaranteed to support the
> + * LoadFile2 based initrd loading protocol if the image version is >= 1.
> + */
> + if (lh->coff_image_header.optional_header.major_image_version >= 1)
> + initrd_use_loadfile2 = 1;
> + else
> + initrd_use_loadfile2 = 0;
> +
> + grub_dprintf ("linux", "LoadFile2 initrd loading %sabled\n",
> + initrd_use_loadfile2 ? "en" : "dis");
> +
> return GRUB_ERR_NONE;
> }
>
> @@ -250,13 +266,86 @@ allocate_initrd_mem (int initrd_pages)
> GRUB_EFI_LOADER_DATA);
> }
>
> +struct initrd_media_device_path {
> + grub_efi_vendor_media_device_path_t vendor;
> + grub_efi_device_path_t end;
> +} GRUB_PACKED;
> +
> +#define LINUX_EFI_INITRD_MEDIA_GUID \
> + { 0x5568e427, 0x68fc, 0x4f3d, \
> + { 0xac, 0x74, 0xca, 0x55, 0x52, 0x31, 0xcc, 0x68 } \
> + }
> +
> +static struct initrd_media_device_path initrd_lf2_device_path = {
> + {
> + {
> + GRUB_EFI_MEDIA_DEVICE_PATH_TYPE,
> + GRUB_EFI_VENDOR_MEDIA_DEVICE_PATH_SUBTYPE,
> + sizeof(grub_efi_vendor_media_device_path_t),
> + },
> + LINUX_EFI_INITRD_MEDIA_GUID
> + }, {
> + GRUB_EFI_END_DEVICE_PATH_TYPE,
> + GRUB_EFI_END_ENTIRE_DEVICE_PATH_SUBTYPE,
> + sizeof(grub_efi_device_path_t)
> + }
> +};
> +
> +static grub_efi_status_t initrd_load_file2(grub_efi_load_file2_t *this,
> + grub_efi_device_path_t
> *device_path,
> + grub_efi_boolean_t boot_policy,
> + grub_efi_uintn_t *buffer_size,
> + void *buffer);
> +
> +static grub_efi_load_file2_t initrd_lf2 = {
> + initrd_load_file2
> +};
> +
> +static grub_efi_status_t initrd_load_file2(grub_efi_load_file2_t *this,
> + grub_efi_device_path_t
> *device_path,
> + grub_efi_boolean_t boot_policy,
> + grub_efi_uintn_t *buffer_size,
> + void *buffer)
> +{
> + grub_efi_status_t status = GRUB_EFI_SUCCESS;
> + grub_efi_uintn_t initrd_size;
> +
> + if (!this || this != &initrd_lf2 || !buffer_size)
> + return GRUB_EFI_INVALID_PARAMETER;
> +
> + if (device_path->type != GRUB_EFI_END_DEVICE_PATH_TYPE ||
> + device_path->subtype != GRUB_EFI_END_ENTIRE_DEVICE_PATH_SUBTYPE)
> + return GRUB_EFI_NOT_FOUND;
> +
> + if (boot_policy)
> + return GRUB_EFI_UNSUPPORTED;
> +
> + initrd_size = grub_get_initrd_size (&initrd_ctx);
> + if (!buffer || *buffer_size < initrd_size)
> + {
> + *buffer_size = initrd_size;
> + return GRUB_EFI_BUFFER_TOO_SMALL;
> + }
> +
> + grub_dprintf ("linux", "Loading initrd via LOAD_FILE2_PROTOCOL\n");
> +
> + if (grub_initrd_load (&initrd_ctx, NULL, buffer))
> + status = GRUB_EFI_LOAD_ERROR;
> +
> + grub_initrd_close (&initrd_ctx);
> + return status;
> +}
> +
> static grub_err_t
> grub_cmd_initrd (grub_command_t cmd __attribute__ ((unused)),
> int argc, char *argv[])
> {
> - struct grub_linux_initrd_context initrd_ctx = { 0, 0, 0 };
> int initrd_size, initrd_pages;
> void *initrd_mem = NULL;
> + grub_efi_guid_t load_file2_guid = GRUB_EFI_LOAD_FILE2_PROTOCOL_GUID;
> + grub_efi_guid_t device_path_guid = GRUB_EFI_DEVICE_PATH_GUID;
> + grub_efi_boot_services_t *b;
> + grub_efi_status_t status;
>
> if (argc == 0)
> {
> @@ -274,6 +363,24 @@ grub_cmd_initrd (grub_command_t cmd __attribute__
> ((unused)),
> if (grub_initrd_init (argc, argv, &initrd_ctx))
> goto fail;
>
> + if (initrd_use_loadfile2)
> + {
> + b = grub_efi_system_table->boot_services;
> + status = b->install_multiple_protocol_interfaces (&initrd_lf2_handle,
> + &load_file2_guid,
> + &initrd_lf2,
> + &device_path_guid,
> +
> &initrd_lf2_device_path,
> + NULL);
> + if (status == GRUB_EFI_OUT_OF_RESOURCES)
> + {
> + grub_error (GRUB_ERR_OUT_OF_MEMORY, N_("out of memory"));
> + return grub_errno;
> + }
> + grub_dprintf ("linux", "LoadFile2 initrd loading protocol
> installed\n");
> + return GRUB_ERR_NONE;
> + }
> +
> initrd_size = grub_get_initrd_size (&initrd_ctx);
> grub_dprintf ("linux", "Loading initrd\n");
>
> --
> 2.17.1
>
--
Regards,
Atish
- [PATCH v2 0/8] linux: implement LoadFile2 initrd loading, Ard Biesheuvel, 2020/10/25
- [PATCH v2 1/8] linux/arm: fix ARM Linux header layout, Ard Biesheuvel, 2020/10/25
- [PATCH v2 2/8] loader/linux: permit NULL argument for argv[] in grub_initrd_load(), Ard Biesheuvel, 2020/10/25
- [PATCH v2 3/8] efi: move MS-DOS stub out of generic PE header definition, Ard Biesheuvel, 2020/10/25
- [PATCH v2 4/8] linux/arm: unify ARM/arm64 vs Xen PE/COFF header handling, Ard Biesheuvel, 2020/10/25
- [PATCH v2 5/8] linux/arm: account for COFF headers appearing at unexpected offsets, Ard Biesheuvel, 2020/10/25
- [PATCH v2 6/8] efi: add definition of LoadFile2 protocol, Ard Biesheuvel, 2020/10/25
- [PATCH v2 7/8] efi: implement LoadFile2 initrd loading protocol for Linux, Ard Biesheuvel, 2020/10/25
- Re: [PATCH v2 7/8] efi: implement LoadFile2 initrd loading protocol for Linux,
Atish Patra <=
- [PATCH v2 8/8] linux: ignore FDT unless we need to modify it, Ard Biesheuvel, 2020/10/25