guix-commits
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

03/03: store: Support 'ssh://' URIs in 'GUIX_DAEMON_SOCKET'.


From: Ludovic Courtès
Subject: 03/03: store: Support 'ssh://' URIs in 'GUIX_DAEMON_SOCKET'.
Date: Fri, 21 Apr 2017 13:18:53 -0400 (EDT)

civodul pushed a commit to branch master
in repository guix.

commit 285f63e805f4a895c1d301efe6d40e93c4e2f704
Author: Ludovic Courtès <address@hidden>
Date:   Fri Apr 21 19:13:32 2017 +0200

    store: Support 'ssh://' URIs in 'GUIX_DAEMON_SOCKET'.
    
    This allows 'guix' commands to talk to a remote store over SSH.
    
    * guix/store.scm (connect-to-daemon)[connect]: Call 'resolve-interface'
    for unknown URI schemes.
    * guix/store/ssh.scm: New file.
    * Makefile.am (MODULES): Add it.
    * doc/guix.texi (The Store): Document it.  Mark remote access as
    experimental.
---
 Makefile.am        |  3 ++-
 doc/guix.texi      | 21 +++++++++++++++++++++
 guix/store.scm     | 22 +++++++++++++++++++---
 guix/store/ssh.scm | 39 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 81 insertions(+), 4 deletions(-)

diff --git a/Makefile.am b/Makefile.am
index a997ed8..db4ebe0 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -187,7 +187,8 @@ if HAVE_GUILE_SSH
 
 MODULES +=                                     \
   guix/ssh.scm                                 \
-  guix/scripts/copy.scm
+  guix/scripts/copy.scm                                \
+  guix/store/ssh.scm
 
 endif HAVE_GUILE_SSH
 
diff --git a/doc/guix.texi b/doc/guix.texi
index 8f64647..0d334e3 100644
--- a/doc/guix.texi
+++ b/doc/guix.texi
@@ -3696,9 +3696,30 @@ guix://master.guix.example.org:1234
 This setup is suitable on local networks, such as clusters, where only
 trusted nodes may connect to the build daemon at
 @code{master.guix.example.org}.
+
address@hidden ssh
address@hidden SSH access to build daemons
+These URIs allow you to connect to a remote daemon over
address@hidden feature requires Guile-SSH (@pxref{Requirements}).}.
+A typical URL might look like this:
+
address@hidden
+ssh://charlie@@guix.example.org:22
address@hidden example
+
+As for @command{guix copy}, the usual OpenSSH client configuration files
+are honored (@pxref{Invoking guix copy}).
 @end table
 
 Additional URI schemes may be supported in the future.
+
address@hidden XXX: Remove this note when the protocol incurs fewer round trips
address@hidden and when (guix derivations) no longer relies on file system 
access.
address@hidden Note
+The ability to connect to remote build daemons is considered
+experimental as of @value{VERSION}.  Please get in touch with us to
+share any problems or suggestions you may have (@pxref{Contributing}).
address@hidden quotation
 @end defvr
 
 @deffn {Scheme Procedure} open-connection address@hidden [#:reserve-space? #t]
diff --git a/guix/store.scm b/guix/store.scm
index 752da98..683f071 100644
--- a/guix/store.scm
+++ b/guix/store.scm
@@ -411,6 +411,11 @@
 (define (connect-to-daemon uri)
   "Connect to the daemon at URI, a string that may be an actual URI or a file
 name."
+  (define (not-supported)
+    (raise (condition (&nix-connection-error
+                       (file uri)
+                       (errno ENOTSUP)))))
+
   (define connect
     (match (string->uri uri)
       (#f                                         ;URI is a file name
@@ -428,10 +433,21 @@ name."
                                  (errno EBADR))))) ;bah!
 
             (open-inet-socket (uri-host uri) (uri-port uri))))
+         ((? symbol? scheme)
+          ;; Try to dynamically load a module for SCHEME.
+          ;; XXX: Errors are swallowed.
+          (match (false-if-exception
+                  (resolve-interface `(guix store ,scheme)))
+            ((? module? module)
+             (match (false-if-exception
+                     (module-ref module 'connect-to-daemon))
+               ((? procedure? connect)
+                (lambda (_)
+                  (connect uri)))
+               (x (not-supported))))
+            (#f (not-supported))))
          (x
-          (raise (condition (&nix-connection-error
-                             (file (uri->string uri))
-                             (errno ENOTSUP)))))))))
+          (not-supported))))))
 
   (connect uri))
 
diff --git a/guix/store/ssh.scm b/guix/store/ssh.scm
new file mode 100644
index 0000000..09c0832
--- /dev/null
+++ b/guix/store/ssh.scm
@@ -0,0 +1,39 @@
+;;; GNU Guix --- Functional package management for GNU
+;;; Copyright © 2017 Ludovic Courtès <address@hidden>
+;;;
+;;; This file is part of GNU Guix.
+;;;
+;;; GNU Guix is free software; you can redistribute it and/or modify it
+;;; under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3 of the License, or (at
+;;; your option) any later version.
+;;;
+;;; GNU Guix is distributed in the hope that it will be useful, but
+;;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;;; GNU General Public License for more details.
+;;;
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Guix.  If not, see <http://www.gnu.org/licenses/>.
+
+(define-module (guix store ssh)
+  #:use-module (guix ssh)
+  #:use-module (web uri)
+  #:export (connect-to-daemon))
+
+;;; Commentary:
+;;;
+;;; This modules provides the entry point for 'open-connection' in (guix
+;;; store).  Passing an 'ssh://' URI to 'open-connection' triggers the use of
+;;; the code in this module.
+;;;
+;;; End:
+
+(define (connect-to-daemon uri)
+  "Connect to the SSH daemon at URI, a URI object with the 'ssh' scheme."
+  (remote-daemon-channel
+   (open-ssh-session (uri-host uri)
+                     #:port (or (uri-port uri) 22)
+                     #:user (uri-userinfo uri))))
+
+;;; ssh.scm ends here



reply via email to

[Prev in Thread] Current Thread [Next in Thread]