[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Problems compiling 2.0a15 on IRIX 6.5.13
From: |
Bas van der Vlies |
Subject: |
RE: Problems compiling 2.0a15 on IRIX 6.5.13 |
Date: |
Thu, 06 Dec 2001 14:21:01 +0100 (MET) |
Rune,
I have just compiled this version with gcc 2.95 no problems, but
gethostbyname still goes wrong. I have also compiled it with
the native SGI compiler and also no problem. You can fetch it
from:
ftp.sara.nl://pub/SARA/outgoing/cfengine-irix-2.0a15.tar.gz
NO Warranties and it is compiled on 6.5.13!!
Regards
On 06-Dec-2001 Rune Mossige wrote:
> Hello,
> I have soem O2's and Octanes running IRIX 6.5.13, and I would like
> to compile cfengine-2.0a15 on those machines.
>
> I have installed gcc 3.0 on them.
>
> In the past (cfengine 1.6.3) I know that gcc did not work on IRIX,
> because gethostbyname (I think) returned the wrong thing (I think
> it was localhost). Is this fixed in gcc3?
>
> Anyway, when I try to compile on an O2, I get:
>
>
> GSTESW 14# make
> Making all in pub
> source='getopt.c' object='getopt.o' libtool=no \
> depfile='.deps/getopt.Po' tmpdepfile='.deps/getopt.TPo' \
> depmode=gcc3 /bin/sh ../depcomp \
> gcc -DHAVE_CONFIG_H -I. -I. -I../src -g -O2 -w -c `test -f
> getopt.c || echo './'`getopt.c
> source='getopt1.c' object='getopt1.o' libtool=no \
> depfile='.deps/getopt1.Po' tmpdepfile='.deps/getopt1.TPo' \
> depmode=gcc3 /bin/sh ../depcomp \
> gcc -DHAVE_CONFIG_H -I. -I. -I../src -g -O2 -w -c `test -f
> getopt1.c || echo './'`getopt1.c
> source='full-write.c' object='full-write.o' libtool=no \
> depfile='.deps/full-write.Po' tmpdepfile='.deps/full-write.TPo' \
> depmode=gcc3 /bin/sh ../depcomp \
> gcc -DHAVE_CONFIG_H -I. -I. -I../src -g -O2 -w -c `test -f
> full-write.c || echo './'`full-write.c
> source='regex.c' object='regex.o' libtool=no \
> depfile='.deps/regex.Po' tmpdepfile='.deps/regex.TPo' \
> depmode=gcc3 /bin/sh ../depcomp \
> gcc -DHAVE_CONFIG_H -I. -I. -I../src -g -O2 -w -c `test -f
> regex.c || echo './'`regex.c
> source='md5.c' object='md5.o' libtool=no \
> depfile='.deps/md5.Po' tmpdepfile='.deps/md5.TPo' \
> depmode=gcc3 /bin/sh ../depcomp \
> gcc -DHAVE_CONFIG_H -I. -I. -I../src -g -O2 -w -c `test -f md5.c
>|| echo './'`md5.c
> source='md5c.c' object='md5c.o' libtool=no \
> depfile='.deps/md5c.Po' tmpdepfile='.deps/md5c.TPo' \
> depmode=gcc3 /bin/sh ../depcomp \
> gcc -DHAVE_CONFIG_H -I. -I. -I../src -g -O2 -w -c `test -f
> md5c.c || echo './'`md5c.c
> source='snprintf.c' object='snprintf.o' libtool=no \
> depfile='.deps/snprintf.Po' tmpdepfile='.deps/snprintf.TPo' \
> depmode=gcc3 /bin/sh ../depcomp \
> gcc -DHAVE_CONFIG_H -I. -I. -I../src -g -O2 -w -c `test -f
> snprintf.c || echo './'`snprintf.c
> snprintf.c: In function `vsnprintf':
> snprintf.c:622: parse error before "int"
> snprintf.c:622: parse error before "int"
> snprintf.c:622: parse error before "int"
> snprintf.c:622: parse error before "int"
> snprintf.c:622: parse error before "int"
> snprintf.c:622: parse error before ')' token
> snprintf.c:636: parse error before "int"
> snprintf.c:636: parse error before "int"
> snprintf.c:636: parse error before "int"
> snprintf.c:636: parse error before "int"
> snprintf.c:636: parse error before "int"
> snprintf.c:636: parse error before ')' token
> snprintf.c:694: parse error before "int"
> snprintf.c:694: parse error before "int"
> snprintf.c:694: parse error before "int"
> snprintf.c:694: parse error before "int"
> snprintf.c:694: parse error before "int"
> snprintf.c:694: parse error before ')' token
> snprintf.c:700: parse error before "const"
> snprintf.c:700: parse error before "const"
> snprintf.c:700: parse error before "const"
> snprintf.c:700: parse error before "const"
> snprintf.c:700: parse error before "const"
> snprintf.c:700: parse error before ')' token
> snprintf.c:759: parse error before "void"
> snprintf.c:759: parse error before "void"
> snprintf.c:759: parse error before "void"
> snprintf.c:759: parse error before "void"
> snprintf.c:759: parse error before "void"
> snprintf.c:759: parse error before ')' token
> snprintf.c:770: parse error before "int"
> snprintf.c:770: parse error before "int"
> snprintf.c:770: parse error before "int"
> snprintf.c:770: parse error before "int"
> snprintf.c:770: parse error before "int"
> snprintf.c:770: parse error before ')' token
> snprintf.c:775: parse error before "long"
> snprintf.c:775: parse error before "long"
> snprintf.c:775: parse error before "long"
> snprintf.c:775: parse error before "long"
> snprintf.c:775: parse error before "long"
> snprintf.c:775: parse error before ')' token
> snprintf.c:791: parse error before "unsigned"
> snprintf.c:791: parse error before "unsigned"
> snprintf.c:791: parse error before "unsigned"
> snprintf.c:791: parse error before "unsigned"
> snprintf.c:791: parse error before "unsigned"
> snprintf.c:791: parse error before ')' token
> snprintf.c:795: parse error before "unsigned"
> snprintf.c:795: parse error before "unsigned"
> snprintf.c:795: parse error before "unsigned"
> snprintf.c:795: parse error before "unsigned"
> snprintf.c:795: parse error before "unsigned"
> snprintf.c:795: parse error before ')' token
> *** Error code 1 (bu21)
> *** Error code 1 (bu21)
> GSTESW 15#
>
>
> Is there anyone who knows how to fix this, or alternatively,
> have a pre-compiled cfengine-2.0a15 binary distribution for
> IRIX 6.5.13? I do not have the SGI compiler, so I am a bit lost...
> --
> -------------------------------------------------------------------
> (-: Hiroshima 45, Chernobyl 86, Windows 95 :-)
> Our ultimate goal is to make overloaded systems appear to be idle.
> High performance, High reliability, Low cost -------- Pick any two.
> -------------------------------------------------------------------
> Rune Mossige, Systems Support Engineer, WesternGeco, Stavanger
> Tel: (+47)51946869 Mobile:(+47)90871024
>
> _______________________________________________
> Help-cfengine mailing list
> Help-cfengine@gnu.org
> http://mail.gnu.org/mailman/listinfo/help-cfengine
--
********************************************************************
* *
* Bas van der Vlies e-mail: basv@sara.nl *
* SARA - Academic Computing Services phone: +31 20 592 8012 *
* Kruislaan 415 fax: +31 20 6683167 *
* 1098 SJ Amsterdam WWW: www.sara.nl *
* *
********************************************************************