[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: cfengine build problem on Solaris 2.6
From: |
Ferguson, Steve |
Subject: |
RE: cfengine build problem on Solaris 2.6 |
Date: |
Fri, 11 Jul 2003 08:21:42 -0400 |
Okay, after trying it again it worked. I blame sun spots for this one. ;-)
Steve
-----Original Message-----
From: Mark.Burgess@iu.hio.no [mailto:Mark.Burgess@iu.hio.no]
Sent: Thursday, July 10, 2003 5:27 PM
To: Steve.Ferguson@gedas.com
Cc: sferry@sevenspace.com; help-cfengine@gnu.org
Subject: Re: cfengine build problem on Solaris 2.6
Try
make distclean
configure
make
Or upgrade flex/bison. Should be fine
M
On 10 Jul, Ferguson, Steve wrote:
> I have flex installed already. configure picks up on it too.
>
> $ grep flex config.log
> configure:3978: checking for flex
> configure:4004: result: /usr/local/bin/flex
> configure:4148: /usr/local/bin/flex conftest.l
> config.status:697: creating src/cflex.l
> ac_cv_prog_LEX=/usr/local/bin/flex
> LEX='/usr/local/bin/flex'
> $ flex -V
> flex version 2.5.4
> $ which flex
> /usr/local/bin/flex
>
> Steve
>
> -----Original Message-----
> From: Shawn Ferry [mailto:sferry@sevenspace.com]
> Sent: Thursday, July 10, 2003 3:10 PM
> To: Ferguson, Steve
> Cc: 'help-cfengine@gnu.org'
> Subject: Re: cfengine build problem on Solaris 2.6
>
>
> You need to install flex, I have submitted a patch to configure that
> will cause it to error if flex is not installed.
>
>
>
> On Thu, 2003-07-10 at 14:41, Ferguson, Steve wrote:
>> I'm trying to build cfengine 2.0.7p3 on some older Solaris 2.6 systems we
>> have around here. It's failing at the point below and I'm not sure why.
>> Any pointers would be appreciated. FYI, I'm using GNU make 3.80, GNU m4
>> 1.4, bison 1.875, flex 2.5.4, OpenSSL 0.9.7b, BerkeleyDB 3.2, and gcc
>> 2.95.3.
>>
>> My configure command is:
>> ./configure --prefix=/opt/software/cfengine-2.0.7p3
>> --with-openssl=/usr/local/ssl
>>
>> Here's the output of make just before the error:
>>
>>
>> gcc -DHAVE_CONFIG_H -I. -I. -I. -I/usr/local/BerkeleyDB.3.2/include
>> -I/usr/local/ssl/include -D_REENTRANT -pthreads -g -O2 -Wreturn-type
>> -Wmissing-prototypes -Wuninitialized -D_REENTRANT -pthreads -g -O2
>> -I/usr/local/BerkeleyDB.3.2/include -D_REENTRANT -pthreads -g -O2
>> -I/usr/local/BerkeleyDB.3.2/include -c `test -f 'wildcard.c' || echo
>> './'`wildcard.c
>> /bin/ksh ../ylwrap `test -f 'cfparse.y' || echo './'`cfparse.y y.tab.c
>> cfparse.c y.tab.h cfparse.h y.output cfparse.output --
> /usr/local/bin/bison
>> -d
>> got /home/ferguss/cfengine-2\.0\.7p3/src/
>> /home/ferguss/cfengine-2.0.7p3/src/cfparse.y: conflicts: 9 shift/reduce,
> 24
>> reduce/reduce
>> make[1]: *** [cfparse.c] Error 1
>> make[1]: Leaving directory `/home/ferguss/cfengine-2.0.7p3/src'
>> make: *** [all] Error 2
>> *** Error code 1
>> make: Fatal error: Command failed for target `all-recursive'
>>
>> Thanks,
>> Steve
>>
>> --
>> Steve Ferguson
>> gedas USA, Inc.
>> Steve.Ferguson@gedas.com
>> http://www.gedasusa.com
>>
>>
>> _______________________________________________
>> Help-cfengine mailing list
>> Help-cfengine@gnu.org
>> http://mail.gnu.org/mailman/listinfo/help-cfengine
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Work: +47 22453272 Email: Mark.Burgess@iu.hio.no
Fax : +47 22453205 WWW : http://www.iu.hio.no/~mark
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~